Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Jordan Valley, Oregon

Our vendors take good care of their rental equipment. It is precisely due to this reason that once we match a contractor with a heavy construction equipment rental service provider in Jordan Valley, there is hardly any chance that the former would want to look out for anyone else in future.

The only exception occurs when you grow fast as an organization and require a bigger fleet of machines at the jobsite that can be best sourced from more than multiple vendors in our network!

If you need heavy construction equipment on rent in Jordan Valley for completing or starting a new construction project, we have got you covered!

Call our toll free number today (or submit the contact form) and narrate your requirements. Our vendors will contact you on the same day and if you are satisfied with their inventory and pricing structure, you can go ahead and sign a rental agreement within a day or two!

Equipment Rental Jordan Valley, Construction equipment rental Jordan Valley, Construction Jordan Valley, Heavy Equipment Rental Jordan Valley.

When selecting a Scissor Lift Rental unit in Hillsboro, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Hillsboro. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Hillsboro. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Hillsboro in no time.

Komatsu Wheel Loaders WD600-6
WD600-6 Wheel Dozer

High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.

Engine
Model Komatsu SAA6D170E-5*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Hydraulic fan at maximum speed - Net 502 HP 374 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter:
Type 3-element, single-stage, double-phase
Transmission:
Type Full-powershift, planetary type
Travel speed Measured with 35/65-33 tires
Speed: Forward
(Lock-up clutch ON)
Reverse
1st 4.2 mph
6.7 km/h
4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h(7.7 mph
12.4 km/h)
8.0mph
12.8 km/h
3rd 12.6 mph
20.3 km/h(13.5 mph
21.7 km/h)
13.7 mph
22.0 km/h
4th 20.5 mph
33.0 km/h(23.4 mph
37.7 km/h)
22.4 mph
36.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 34.3 MPa
350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 5.1" x 20" 130 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 47.6 + 47.6 U.S. gal/min 180 + 180 ltr/min
Relief valve setting 3,560 psi 24.5 MPa 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Blade lift - 1 6.3" x 42.5" 160 mm x 1080 mm
Tilt and pitch - 2 7.0" x 9.3" 180 mm x 237 mm
Control valve 3-spool type
Control positions:
Blade lift Raise, hold, lower, and float
Tilt and pitch Tilt-left, tilt-right, hold, pitch forward and back
Hydraulic cycle time
Raise 2.0 sec
Lower 1.3 sec
Tilt (left / right) 0.8 / 1.1 sec
Pitch (front / rear)mage 2.1 / 1.6 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle:
Front 41.0 U.S. gal 155 ltr
Rear 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

John Deere Wheel Loader 444k
Think ahead.

Just when you thought that nothing beats a John Deere loader, along comes the K-Series. Incorporating many of its predecessors, innovative features, this machine introduces numerous refinements, plus a new 2¾ yard model that further defines loader design. More spacious, quieter cabs provide even better visibility. Easier-to-read multifunction monitors expand operator convenience and productivity. And a wide variety of options in both Z-bar and parallel-lift configurations let you spec the right machine for your work.

Looking for a utility loader that'„¢s clearly ahead of the pack? Let us show you why we will have you thinking K-Series.

ENGINE
Engine Make / Engine Model John Deere / PowerTech PVX 4045
Emission Rating Interim Tier 4
Net Power, kW (hp) @ Rated rpm 92 (124) @ 2100
Displacement, L (cu in) 4.5 (276)
Net Peak Torque, N-m (lb-ft) 507 (374)
Calculated % Torque Rise 34
ELECTRICAL
Voltage 24
Alternator amps 100
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 36 (22.4)
Max. Travel Speed - rev, kph (mph) 25.3 (15.7)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Multi Disc
Service brake location Axle Midboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 140 (37)
System Pressure, kPa (psi) 24821 (3600)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 1.5 (2)
Bucket Capacity Max., cu m (cu yd) 1.9 (2.5)
Breakout Force, Std Bucket, kN (lb) 78.1 (17570)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 1.9 (2.5)
Tire Size Standard 17.5 R25
TIPPING LOAD
Straight, kg (lb) 9233 (20356)
Full Turn, kg (lb) 8047 (17741)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 3600 (11 ft 10 in)
Dump Clear @ 45 deg, mm (ft in) 2670 (8 ft 9 in)
Reach @ 7', mm (ft in) 1440 (4 ft 9 in)
Reach @ Full Height, mm (ft in) 1040 (3 ft 5 in)
Wheelbase, mm (ft in) 2760 (9 ft 1 in)
Clearance Circle, mm (ft in) 11190 (36 ft 9 in)
Overall Length, mm (ft in) 6860 (22 ft 6 in)
Height to Top of Cab, mm (ft in) 3170 (10 ft 5 in)
Ground Clearance, mm (in) 393 (15.5)
CAPACITIES
Fuel Tank, L (gal) 242 (64)
Hydraulic Reservoir, L (gal) 91 (24)
WEIGHT
SAE Operating Weight, kg (lb) 11203 (24698)
Metric Ton Weight, kg (lb) 11.203 (24.698)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics