Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Mill City, Oregon

Our vendors take good care of their rental equipment. It is precisely due to this reason that once we match a contractor with a heavy construction equipment rental service provider in Mill City, there is hardly any chance that the former would want to look out for anyone else in future.

The only exception occurs when you grow fast as an organization and require a bigger fleet of machines at the jobsite that can be best sourced from more than multiple vendors in our network!

If you need heavy construction equipment on rent in Mill City for completing or starting a new construction project, we have got you covered!

Call our toll free number today (or submit the contact form) and narrate your requirements. Our vendors will contact you on the same day and if you are satisfied with their inventory and pricing structure, you can go ahead and sign a rental agreement within a day or two!

Equipment Rental Mill City, Construction equipment rental Mill City, Construction Mill City, Heavy Equipment Rental Mill City.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Excavators PC360LC-10

PC360LC-10 Hydraulic Excavator

The PC360LC-10 Hydraulic Excavator with Komatsu's Tier 4 interim engine technology can save up to 10% on your fuel bill compared to the previous model and, more importantly, you won't need to stop the machine to do normal regeneration. Couple that with six working modes, Power Max, more powerful lift mode and you have an excavator that will meet any challenge you can through at it.

Engine
Model Komatsu SAA6D114E-5*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.49" 114 mm
Stroke 5.69" 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Horsepower
SAE J1995 : Gross 271 HP 202 kW
ISO 9249/SAE J1349 : Net 257 HP 192 kW
Rated rpm 1950 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU Stage 3B emissions certified.
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 141 U.S. gal/min 535 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,050 psi 285 kgf/cm²/ 27.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.5" x 58.3" x 3.9" 140 mm x 1480 mm x 100 mm
Arm / 1 6.3" x 71.9" x 4.3" 160 mm x 1825 mm x 110 mm
Bucket / 1 - for 3.2 m 10'5" and 4.0 m 13'2" Arms 5.5" x 50.6" x 3.9" 140 mm x 1285 mm x 100 mm
Bucket / 1 - for 2.54 m 8'4" Arm 5.9" x 50.6" x 4.3" 150 mm x 1285 mm x 110 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 66,191 lb 290 kN / 29570 kgf
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.8 mph 4.5 km/h
Low 2.0 mph 3.2 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method: Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 82,313 ft. lbs. 11386 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 159.8 U.S. gal 605 ltr
Coolant 9.7 U.S. gal 37 ltr
Engine 9.2 U.S. gal 35.0 ltr
Final drive, each side 2.4 U.S. gal 9.0 ltr
Swing drive 3.6 U.S. gal 13.7 ltr
Hydraulic tank 49.7 U.S. gal 188 ltr
Hydraulic system 96.4 U.S. gal 365 ltr
Operating Weight (approximate)
Operating weight includes 6500 mm / 21'3" one-piece HD boom, 3185 mm / 10'5" arm, SAE heaped 1.96 m³ / 2.56 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 28" 700 mm
Operating Weight 78,255 lb 35496 kg
Ground Pressure 8.31 psi 0.59 kg/cm²
Shoes 31.5'' 800 mm
Operating Weight: 79,093 lb 35876 kg
Ground Pressure 7.40 psi 0.52 kg/cm²
Shoes 33.5" 850 mm
Operating Weight: 79,930 lb 36255 kg
Ground Pressure 7.00 psi 0.50 kg/cm²
Component Weights
Arm including bucket cylinder and linkage:
3185 mm / 10'5" arm assembly 3,882 lb 1761 kg
4020 mm / 13'2" arm assembly 4,383 lb 1988 kg
One piece HD boom including arm cylinder:
6500 mm / 21'3" boom assembly 6,912 lb 3135 kg
Boom cylinders x 2 571 lb 259 kg
Counterweight 15,631 lb 7090 kg
1.96 m³ / 2.56 yd³ bucket - 54" width 3,425 lb 1554 kg

Komatsu Excavators PC490LC-10 MH
PC490LC-10 MH Material Handler

If your needs require long reach and high stability in an excavator to handle material with grapples, clams or magnets, the Komatsu Excavators PC490LC-10 material handler has the boom and arm combinations you'll need.

Engine
Model Komatsu SAA6D125E-6-A*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.92" 125 mm
Stroke 5.91" 150 mm
Piston displacement 674 in³ 11.04 ltr
Horsepower
SAE J1995 : Gross 362 HP 270 kW
ISO 9249/SAE J1349 : Net 359 HP 268 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulic
Type .. HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 184 U.S. gal/min 695 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors: 1 x axial piston motor with swing holding brake
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,055 psi 285 kgf/cm²/ 27.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 7" x 59" x 5" 177.8 mm x 1499 mm x 127 mm
Arm / 1 7.5" x 78" x 5" 190.5 mm x 1981 mm x 127 mm
Auxiliary pump for generator:
Maximum flow 36.7 gal/min 139 ltr/min
Maximum pressure 3,500 psi 24.2 MPa 246 kg/cm²
Mounting flange SAE-B, 2 bolt
Drive spline 15T-16/32DP
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 73,987 lb 329 kN / 33560 kg
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift):
High 3.4 mph 5.5 km/h
Mid 2.6 mph 4.2 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.1 rpm
Swing torque 97,024 ft. lbs. 13414 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 4 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 172 U.S. gal 650 ltr
Coolant 11.6 U.S. gal 44 ltr
Engine 10.0 U.S. gal 38.0 ltr
Final drive, each side 2.9 U.S. gal 11.0 ltr
Swing drive 5.3 U.S. gal 20 ltr
Hydraulic tank 65.5 U.S. gal 248 ltr
Hydraulic system 124.7 U.S. gal 472 ltr
Operating Weight (approximate)
Operating weight without work tool (approximate)
Operating weight includes KO2US55 2-piece 16.8 m / 55' front, counterweight for MH 12317 kg / 27,450 lb, widen carbody, 78" cab riser, 25kw generator, rated capacities of lubricants, coolant, full fuel tank, operator and standard equipment.
Triple-Grouser Shoes 28" 700 mm
Operating Weight 126,530 lb 57410 kg
Ground Pressure 13.4 psi 0.94 kg/cm²
Triple-Grouser Shoes 31.5'' 800 mm
Operating Weight: 127,630 lb 57910 kg
Ground Pressure 11.8 psi 0.83 kg/cm²
Triple-Grouser Shoes 35.5" 900 mm
Operating Weight: 128,710 lb 58400 kg
Ground Pressure 10.6 psi 0.74 kg/cm²
For KOUS54 3-piece 16.5 m 54' front, add weight 105 kg 230 lb

JLG Telehandlers G10-55A

JLG Telehandlers G10-55A
Key Specs

  • Maximum Lift Capacity: 10000 lb / 4535.92 kg
  • Outriggers Up Max Lift Height: 55 ft / 16.76 m
  • Maximum Reach: 42 ft 6 in. / 12.95 m
  • Maximum Lift Height: 55 ft / 16.76 m

Key Features

  • Roomier cab for added comfort and to reduce operator fatigue
  • All-wheel steering for easy maneuverability
  • Full range of attachments for versatility in handling jobsite challenges
  • Single joystick control for smooth operation of boom movements
  • Power shift transmission provides efficient control
Performance
Breakout Force 25600 lb / 11611.96 kg
Drawbar Pull 24000 lb / 10886.22 kg
Frame Leveling 10 Degrees
Outriggers Up Lift Capacity Full Height 4000 lb / 1814.37 kg
Outriggers Up Lift Capacity Full Reach 500 lb / 226.80 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 10000 lb / 4535.92 kg
Outriggers Up Max Lift Height 55 ft / 16.76 m
Outriggers Up Max Forward Reach 42 ft / 12.8 m
Lift Capacity at Full Height 5000 lb / 2267.96 kg
Lift Capacity at Max Reach 3000 lb / 1360.78 kg
Maximum Reach 42 ft 6 in. / 12.95 m
Maximum Lift Height 55 ft / 16.76 m
Outriggers or Stabilizers Yes
Outside Turning Radius 14 ft 6 in. / 4.41 m
Speed - Maximum Lift 15 sec.
Speed - Maximum Lower 14 sec.
Speed - Maximum Telescope In 12 sec.
Speed - Maximum Telescope Out 16 sec.
Speed - Maximum Travel 20 mph / 32.19 km/h
Dimensional Data
Ground Clearance 1 ft 7 in. / 0.48 m
Machine Height 8 ft 6 in. / 2.59 m
Machine Length 20 ft / 6.1 m
Machine Width 8 ft 6 in. / 2.59 m
Tire Size 400/75-28
Track Width 7 ft 4 in. / 2.24 m
Wheelbase 12 ft / 3.66 m
Power Source
Capacity - Fuel Tank 38 gal. / 143.85 L
Engine Horsepower 130 hp / 96.98 kW
Engine Manufacturer Cummins
Engine Model QSB4.5L
Maximum Engine RPM 2500 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Var Load Sensing Piston
Hydraulic System Pressure 3625 psi / 253.86 Kg/cm2
Operating Vehicle Weight 34850 lb / 15807.69 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics