Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Ambler, Pennsylvania

Just about any construction project, big or small, requires machines in top-notch condition for smooth and timely completion.

Among all contractors, first time entrepreneurs or well established construction companies, a big chink is now opting for construction equipment rentals for maximizing their profit margins. Finding reliable vendors through reputed platforms like ours is easy and hassle free.

Rental services for the provision of heavy construction equipment in Ambler are hassle free and the best part is that there are no ownership costs involved.

Since our vendors serve all of Ambler as well as neighboring localities, you can be assured of the fact that there’d always be some convenient locations for you to pick heavy machinery or tools from. Some vendors also provide construction equipment transportation as an add-on.

Dial our toll free number or post the online query (through contact form on the right) to get started today!

Equipment Rental Ambler, Construction equipment rental Ambler, Construction Ambler, Heavy Equipment Rental Ambler.

Komatsu Trucks 930E-4SE

930E-4SE Electric Drive Truck

 

Engine
* Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator.Power ratings above represent engine performance in accordance with SAE J1995 and J1349 conditions.
Make and model Komatsu SSDA18V170
Fuel Diesel
Number of cylinders 18
Operating cycle 4 cycle
Gross horsepower @ 1900 rpm 3,500 HP 2611 kW
Net flywheel power* @ 1900 rpm 3,429 HP 2558 kW
Weight (wet) 22,266 lb 10100 kg
Electric Drive
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
** Optional ratios available.
AC CURRENT
Alternator GTA-39
Dual impeller in-line blower 16,000 cfm 453 m³/min
Control AC Torque Control System
Motorized wheels* GDY106 AC Induction Traction Motors
Ratio** 32.62:1
Speed (maximum) 40 mph 64.5 km/h
Tires and Rims
*Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Rock service, tubeless, radial tires
Standard tire* 53/80 R63
Taper Lock 914 mm x 1600 mm x 127 mm (36'' x 63'' x 5.0'') rim assembly Rated at 758 kPa (110 psi) cold inflation pressure for rims, 600 kPa (87 psi) for tires.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling, and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel (two-piece)
0.63'' 16 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel
0.35'' 9 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.31'' 8 mm
Canopy sheet
100,000 psi / 690 mPa
0.19'' 5 mm
Standard SAE heaped 2:1 276 yd3 211 m3
Standard Komatsu body weight 66,936 lb 30362 kg
*Komatsu must approve all bodies through a Body Application Worksheet.
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS structure (meets J1040 Apr88), adjustable air suspension seat w/lumbar support and arm rests, passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 MPa
Casting material
tensile strength steel
90,000 psi 620.5 MPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.77'' 45 mm
Side plate thickness 0.98'' 25 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Service brakes: oil-cooled, hydraulic-actuated, multiple disc brakes at each wheel. Traction system wheel slip/slide control.
Max. service apply pressure 2500 psi 17237 kPa
Total friction area per brake 15,038 in2 97025 cm2
Secondary brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade @ maximum gross vehicle weight.
Electric dynamic retarder Max 5400 hp 4026 kW Continuous 3900 hp 2909 kW
Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.92'' 328 mm
Max. rear stroke 9.40'' 239 mm
Max. rear axle oscillation 6.5°
*Rear suspensions are inverted.
Cooling System
L&M radiator assembly, split-flow, with deareation-type top tank measuring 3277 mm x 2164 (10'9" x 7'1").
Service Capacities
Cooling System 190 U.S. gal 719 L
Crankcase* 90 U.S. gal 341 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 25 U.S. gal 95 L
Fuel 1400 U.S. gal 5300 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 97'7'' 29.7 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure.
Brake component cabinet Above deck, easily accessible with diagnostic test connections.
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening.
Hoist times:
Power-up loaded 21 sec
Power-down 23 sec
Float-down empty 24 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 1022 lpm / 270 gpm at 1900 rpm and 17237 kPa / 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm (65 gpm) at 1900 rpm and 18961 kPa (2,750 psi)
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27579 kPa
Quick disconnects standard for systems diagnostics and buddy dump.
Electrical System
4 x 8D and 2 x 30H, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24 volt, 140 amp
Lighting 24 volt
Cranking motor two/24 volt
Weight Distribution
Empty Vehicle: lb kg
Front axle (48.5%) 230,293 104459
Rear axle (51.5%) 244,377 110847
Total (wet, 100% fuel) 474,670 215307
Loaded Vehicle at maximum GVW rating
Front axle (32.8%) 365,871 165956
Rear axle (67.2%) 748,799 339649/td>
Total 1,115,000 505755
NOTE: GVW shall not exceed 505755 kg 1,115,000 lb including options, liners, fuel and payload, subject to application approval by Komatsu.
NOTE: Komatsu trucks comply with SAE specifications for cab noise, ROPS, steering and braking. Cover photos and illustrations may show optional equipment. Materials and specifications subject to change without notice.

Komatsu Dozers D65PX-17 WH

D65PX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110 mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Komatsu Dozer D155AX-8
D155AX-8
The new Tier 4 Final D155AX-8 dozer incorporates well proven Komatsu engine emissions technology that does not interfere with daily operation. Class leading engine horsepower, large capacity Sigmadozer blade and automatic lockup torque converter efficiently move massive amounts of material while using less fuel than prior model. The operator cab is loaded with features to help maintain operator comfort during the work day.

Engine
Model Komatsu SAA6D140E-7*
Type 4-cycle, water-cooled, direct injection
Aspiration 100 in³ Komatsu Variable Geometry Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 140 mm x 165 mm 5.51" x 6.50"
Piston displacement 15.24 ltr 930 in³
Governor Mid-range, electronic
Horsepower :
SAE J1995 - Gross 268 kW 360 HP
ISO 9249 / SAE J1349* - Net 264 kW 354 HP
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system :
Method Gear pump, force lubrication
Filter Full-flow
*Net horsepower at the maximum speed of radiator cooling fan: 239 kW 320 HP
**EPA Tier 4 Final emissions certified
TORQFLOW Transmission
Komatsu's automatic TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch, and a planetary gear, multipledisc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Equipped with gearshift lock lever and neutral safety switch.
Travel speed:
1st Gear forward 3.8 km/h 2.4 mph
1st Gear reverse 4.6 km/h 2.9 mph
2nd Gear forward 5.6 km/h 3.5 mph
2nd Gear reverse 6.8 km/h 4.2 mph
3rd L Gear forward 7.5 km/h 4.7 mph
3rd L Gear reverse 9.2 km/h 5.7 mph
3rd Gear forward 11.6 km/h 7.2 mph
3rd Gear reverse 14.0 km/h 8.7 mph
Final Drive
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy in-the-field replacement.
Steering System
PCCS lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic steering system (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gearshift lock lever also applies parking brakes.

Minimum turning radius 2.14 m 7'0"
Undercarriage
Suspension: Oscillation-type with equalizer bar and forward mounted pivot shafts

Track roller frame: Monocoque, high-tensilestrength steel construction

K-Bogie undercarriage
Lubricated track rollers are resiliently mounted the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.

Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.

Number of shoes (each side) 42
Grouser height 80 mm 3.1"
Shoe width (standard/maximum) 24" / 28" 610 mm / 710 mm
Ground contact area 39955 cm² 6,193 in²
Ground pressure (tractor only) 80.3 kPa / 0.82 kg/cm² 11.6 psi
Service Refill Capacities
Fuel tank 625 ltr 165 U.S. gal
Coolant 104 ltr 27.5 U.S. gal
Engine oil 37 ltr 9.8 U.S. gal
Damper 1.5 ltr 0.4 U.S. gal
Transmission, bevel gear, and steering system 90 ltr 23.8 U.S. gal
Final drive (each side) 31 ltr 8.2 U.S. gal
DEF tank 39 ltr 10.3 U.S. gal
Hydraulic oil capacity 95 ltr 25.1 U.S. gal
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment (including ROPS cab).
632700 kg 72,100 lb
Operating weight
Including strengthened SIGMADOZER, giant ripper, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
40500 kg 89,300 lb
Ground pressure 99.5 kPa / 1.01 kg/cm² 14.4 psi
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic tank.

Variable piston pump with capacity (discharge flow) of 325 L/min 85.9 U.S. gal for steering and 180 L/min 47.6 U.S. gal for implement at rated engine rpm.

Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi

Control valves:
Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U
Positions: Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions: Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Number of cylinders Bore Bore
Blade Lift / 2 110 mm 4.33"
Blade Tilt (Dual tilt) / 2 160 mm 6.30"
Blade Tilt (Single Tilt) / 1 160 mm 6.30"
Ripper Lift 180 mm 7.09"
Ripper Tilt / 1 200 mm 7.87"
Hydraulic oil capacity (refill):
SIGMADOZER 95 ltr 25.1 U.S. gal
Semi-U dozer 95 ltr 25.1 U.S. gal
Full-U dozer 95 ltr 25.1 U.S. gal
Ripper equipment (additional volume):
Multi-shank ripper 37 ltr 9.8 U.S. gal
Giant ripper 37 ltr 9.8 U.S. gal

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics