Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Blakeslee, Pennsylvania

Just about any construction project, big or small, requires machines in top-notch condition for smooth and timely completion.

Among all contractors, first time entrepreneurs or well established construction companies, a big chink is now opting for construction equipment rentals for maximizing their profit margins. Finding reliable vendors through reputed platforms like ours is easy and hassle free.

Rental services for the provision of heavy construction equipment in Blakeslee are hassle free and the best part is that there are no ownership costs involved.

Since our vendors serve all of Blakeslee as well as neighboring localities, you can be assured of the fact that there’d always be some convenient locations for you to pick heavy machinery or tools from. Some vendors also provide construction equipment transportation as an add-on.

Dial our toll free number or post the online query (through contact form on the right) to get started today!

Equipment Rental Blakeslee, Construction equipment rental Blakeslee, Construction Blakeslee, Heavy Equipment Rental Blakeslee.

Komatsu Excavators HB215LC-1

HB215LC-1 Hybrid Excavator

The HB215LC-1 uses groundbreaking swing regeneration hybrid technology to save up to an average of 25% in fuel consumption and a like amount in emissions. By capturing the energy that normally would be lost during swing braking in a capacitor, the energy can then be used to power the swing and has energy left to boost the engine by up to 60 horsepower. And all this is done without losing any performance over a standard excavator. And by the way, the Hybrid Excavator HB215LC-1 is very quiet, which is great when working in urban areas.

Engine
Model Komatsu SAA4D107E-1-A
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged and aftercooled
Number of cylinders 1
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 272 in³ 4.46 ltr
Horsepower:
SAE J1995 - Gross 148 HP 110 kW
ISO 9249 / SAE J1349 - Net 139 HP 104 kW
Rated rpm 2000 rpm
Fan drive type Mechanical
Governor All-speed control, electronic
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 5
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 116 U.S. gal/min 439 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 4.7" x 52.5" x 3.3" 120 mm x 1334 mm x 85 mm
Arm / 1 5.3" x 58.7" x 3.7" 135 mm x 1490 mm x 95 mm
Bucket for 2.41 m 7'11" and 2.93 m 9'7" Arm / 1 4.5" x 44.1" x 3.2" 115 mm x 1120 mm x 80 mm
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 40,120 lb 178 kN / 18200 kg
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 9 each side
Coolant and Lubricant Capacity refilling
Fuel tank 105.7 U.S. gal 400 ltr
Coolant (Engine) 4.6 U.S. gal 17.3 ltr
(Hybrid) 1.4 U.S. gal 5.2 ltr
Final drive, each side 0.9 U.S. gal 3.3 ltr
Swing drive 1.9 U.S. gal 7.1 ltr
Swing motor 0.4 U.S. gal 1.6 ltr
Generator motor 1.6 U.S. gal 6.0 ltr
Hydraulic tank 35.7 U.S. gal 135 ltr
Operating Weight (APROXIMATE)
Operating weight including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 0.80 m³ / 1.05 yd³ backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
HB215LC-1 Shoes 31.5" 800 mm
Operating Weight 48,175 lb 21850 kg
Ground Pressure 4.9 psi 0.35 kg/cm²
33.9 kPa

 

Finding the latest, well-maintained and completely tested equipment, whether for lifting goods at a warehouse or at construction sites is not exactly easy. We know that contractors and business owners face this problem time and again when the need boom lifts on rent in Glenwood or elsewhere.

It was for solving these problems that HeavyRentals.Equipment platform was created! Today, we are proud of the fact that we service thousands of locations all across the United States including Glenwood.

So, the next time you need electric, diesel or gas boom lifts on rent in Glenwood, you can always count on HeavyRentals.Equipment!

You can always expect prompt delivery service, flexible rental duration options, and even site inspections (if that's required). In case there are any urgent callouts, we are here to make emergency services available as well.

Please call us at the number listed above or fill up the inquiry form available, here at HeavyRentals.Equipment. You'd be able to glance through the best deals on boom lift rentals within few hours, instead of having to spend several days of your precious time on calling up and filtering out numerous rental companies.

Komatsu Excavators PC88MR-10
PC88MR-10 Hydraulic Excavator

The PC88MR-10 is a link between minis and mid-size excavators. The PC88MR-10 has a swing boom, tight tail swing, three track options and backfill blade like a mini but is built to have the reliability and durability of larger excavators.

Engine
Model Komatsu SAA4D95LE-5
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, and air-to-air aftercooled
Number of cylinders 4
Piston displacement 199 in³ 3.26 ltr
Horsepower @ 1950 rpm:
Net (ISO 9249/SAE J1349) 65.5 HP 48.8 kW
Electric System
Operation voltage 24 V
Battery 55 Ah / 2x12 V
Alternator 35 A / 24 V
Starter 4.5 kW / 24 V
Hydraulic System
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, Closed-center system with load-sensing valves and pressure-compensated valves
Main pumps:
Type Variable displacement, axial piston
Maximum flow 42.3 U.S gal/min 160 ltr/min
Hydraulic motors:
Travel 2 x piston motor with parking brake
Swing 1 x piston motor with swing holding brake
Relief valve setting:
Implement, travel circuit 3,840 psi 26.5 MPa 270 kgf/cm²
Swing and blade circuit 3,060 psi 21.1 MPa 215 kgf/cm²
Performance
Travel speed:
High 3.2 mph 5.1 km/hr
Low 1.8 mph 2.9 km/hr
Swing speed 10.0 rpm
Ground pressure 5.4 psi 0.38 kg/cm²
Max. drawbar pull 15,050 lbf 66.9 kN / 6820 kgf
Gradeability 35°
Bucket digging force (ISO) 13,780 lb 6250 kg
Arm crowd force (ISO) 8,160 lb 3700 kg
Swing System
Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Automatic, with oil immersed discs
Drives & Brakes
Steering control Two levers with pedalsr
Drive method Fully hydrostatic
Service brake Hydraulic lock
Parking brake Mechanical disc
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed track
Track adjuster Hydraulic
Number of carrier rollers 1 each side
Number of track rollers 5 each side
Refill Capacities
Fuel tank 33.0 u.s. gal 125 ltr
Radiator 2.6 u.s. gal 10 ltr
Engine 2.9 u.s. gal 11 ltr
Final drive, each side 0.3 u.s. gal 1.1 ltr
Swing drive 0.7 U.S. gal 2.85 ltr
Hydraulic tank 14.8 u.s. gal 56 ltr
Operating Weight (approximate)
Operating weight including 3405 mm / 11'2" one-piece boom, 2100 mm / 6'11" arm, SAE heaped 0.28 m³ / 0.37 yd³ backhoe bucket, blade, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Operating weight 18,558 lb 8420 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics