get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Westtown, Pennsylvania

Just about any construction project, big or small, requires machines in top-notch condition for smooth and timely completion.

Among all contractors, first time entrepreneurs or well established construction companies, a big chink is now opting for construction equipment rentals for maximizing their profit margins. Finding reliable vendors through reputed platforms like ours is easy and hassle free.

Rental services for the provision of heavy construction equipment in Westtown are hassle free and the best part is that there are no ownership costs involved.

Since our vendors serve all of Westtown as well as neighboring localities, you can be assured of the fact that there'd always be some convenient locations for you to pick heavy machinery or tools from. Some vendors also provide construction equipment transportation as an add-on.

Dial our toll free number or post the online query (through contact form on the right) to get started today!

Equipment Rental Westtown, Construction equipment rental Westtown, Construction Westtown, Heavy Equipment Rental Westtown.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Scraper Systems 9570RT
9570RT
Why walk when you can run? The New 9RT Series Tractors are built to defy convention. With more engine horsepower (470 - 570 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. Just when you think there isn't any room for more, we outfitted the 9RT's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • Cummins QSX15
  • New and improved e18TM PowerShift Transmission
  • AirCushion Suspension System
  • New CommandViewTM III cab
Horsepower: 570 engine hp
Hydraulic Capacity: 115 U.S. gpm (435 L/min) standard
Drawbar Support: Available for long or short scraper drawbars

Komatsu Trucks 730E-8

730E-8 Electric Drive Truck

The 203 ton capacity 730E-8 is a very versatile electric drive truck that features 1,860 flywheel horsepower. The cab has an integral ROPS, air ride seat, dynamic retarding and power steering with auto emergency steering to make the operator comfortable and more productive. To make the 730E more productive, a trolley assist option is available for circumstances where an overhead electrified trolley system can be used.

Engine
Make and model* Komatsu SSDA16V159
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 2,000 HP 1492 kW
Net flywheel power*** @ 1900 rpm 1,884 HP 1405 kW
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator GTA-49
Dual impeller in-line blower 13,900 cfm 393 m³/min
Control AC Torque Control System
Motorized wheels* GEB35 Induction Traction Motors
Ratio 30.8:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires
Standard tire* 37.00 R57
Flange mount rim 686 mm x 1448 mm x 152 mm 27'' x 57'' x 6'' rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - Outer (1379 MPa 200,000 psi tensile strength steel) 0.63'' 16 mm
Floor sheet - Center (1379 MPa 200,000 psi tensile strength steel) 0.75'' 19 mm
Front sheet (1379 MPa 200,000 psi tensile strength steel) 0.39'' 10 mm
Side sheet (1379 MPa 200,000 psi tensile strength steel) 0.31'' 8 mm
Canopy sheet (690 MPa 100,000 psi tensile strength steel) 0.24'' 6 mm
Capacity struck 153 yd³ 117 m³
SAE heaped 2:1 193 yd³ 148 m³
Standard Komatsu body weight 62,100 lb 28169 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material 70,000 psi 482.6 mPa tensile strength steel
Casting material 90,000 psi 620.5 mPa tensile strength steel
Rail width 11.02'' 280 mm
Rail depth (minimum) 31.38'' 797 mm
Top and bottom plate thickness 1.26'' 32 mm
Side plate thickness 0.75'' 19 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996.
Service brakes: all-hydraulic actuated.
Front: Wheel speed disc. Three calipers on a 1213 mm / 47.75" O.D. disc
Rear Dual disc armature speed. Two 635 mm / 25" O.D. discs per side. One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 3,200 hp / 2387 kW Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.28'' 312 mm
Max. rear stroke 10.98'' 279 mm
Max. rear axle oscillation ±5.3°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank
Radiator frontal area 50.1 ft² 4.65 m²
Service Capacities
Cooling system 117 U.S. gal 441 L
Crankcase* 59 U.S. gal 223 L
Hydraulic system 210 U.S. gal 795 L
Motor gear box (each) 10 U.S. gal 38 L
Fuel 800 U.S. gal 3028 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 89' 27.2 m
Reservoir 135 U.S. gal 511 L
Filtration In-line replaceable elements
Suction Single, full-flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 19 sec
Power-down 10.5 sec
Float--down empty 12 sec
Pumps: Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 666 lpm 176 gpm at 1900 rpm and 18961 kPa 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 254 lpm 67 gpm at 1900 rpm and 19134 kPa 2,775 psi
System relief pressures:
Hoist 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27580 kPa
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24-volt 250 amp
Lighting 24 volt
Cranking motors Two/24 volt

John Deere Scraper Systems 1814E
1814E
The 1814E Ejector Scraper is a six-tire scraper that carries 18 cu yd of material and has a 14-ft cutting width. This scraper works well for construction contractors bulk-hauling materials using 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 13.2 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 26 ft 10 in. 8179 mm
Width, ft, in. (mm) 15 ft 11 in. 4851 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 14 ft 6 in. 4420 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 25,800 lb 11,702 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 25%
Wheels 75%
TIRES
Number of tires per scraper 6
Tire sizes --
Standard 17.5 X 25
Option 1 20.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics