Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Gramling, South-Carolina

Our platform is your one stop solution for all your construction equipment rental needs in Gramling.From basic, do-it-yourself home projects to large construction sites, this platform is your multi-tier rental solution for all kinds of heavy machinery, tools and equipment.

Whether you need just one trailer for a small job or require an entire fleet of excavators, backhoes, lifts, etc., our vendors would be able to meet all your varied requirements. The fact that our rental network, with strong presence in Salley, happens to be the most preferred one is mostly due to the fact that we’ve partnered with some of the most reliable vendors. You can safely expect all machines or heavy construction equipment to be clean and well-maintained, for instance, when you find a vendor through us.

Dial our toll free number or submit an online query (through contact form on the right) and see for yourself!

Equipment Rental Gramling, Construction equipment rental Gramling, Construction Gramling, Heavy Equipment Rental Gramling.

New Holland Skid Steer Loader L220

New Holland Skid Steer Loader L220
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model ISM / N844LTA
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135 (2.2)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 67 (50) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 64 (47.7) @ 2800 rpm
Peak torque, lb-ft (Nm) 153 (208) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.8 (12.5)
Travel speed, high range (optional),mph (km/h) 11.4 (18.3)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 121 (3073)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised,in (mm) 114.3 (2902)
Overall length without attachment with coupler, in (mm) 105.7 (2697)
Dump angle, degrees 52°
Dump reach (max height), in (mm) 29.8 (758)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 88°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 25°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 69.1 (1755)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 20.6 (78)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 30.7 (116.2)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2000 (905)
Tipping load, lbs (kg) 4000 (1814)
Breakout force, lift cylinder, lbs (kN) 3450 (15.3)
Breakout force, bucket cylinder, lbs (kN) 7300 (32.5)
Operating weight, lbs (kg) 6470 (2930)

New Holland Skid Steer Loader L216

Skid Steer Loader 216

MORE DIGGING AND PUSHING POWER BY DESIGN
This model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 139 (188) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised,in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in(mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 18.4 (69.7)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1600 (725)
Tipping load, lbs (kg) 3200 (1455)
Breakout force, lift cylinder, lbs (kN) 3310 (14.7)
Breakout force, bucket cylinder, lbs (kN) 5270 (23.4)
Operating weight, lbs (kg) 5510 (2505)

New Holland Tractor Loaders U80C

Tractor Loaders U80C

PROFIT-MAKING VERSATILITY
The New Holland U80C tractor loader provides profit-making power on both front and back. Tier 4 engines deliver the power and torque you need for loading and grading while reducing fuel use and emissions.

Engine
Manufacturer/model FPT F5HFL413D*A
Bore x stroke, in (mm) 3.9 x 4.33 (99 x 110)
Displacement, in³ (L) 207 (3.4)
Horsepower (SAE J1349) Gross @ 2,200 rpm, (kW) 85 (63)
Horsepower (SAE J1349)Net @ 2,200 rpm, (kW) 78 (58)
Gross, lb-ft (Nm) 276 (374)
Net, lb-ft (Nm) 268 (364)
Power Train
Differential-lock On the go push-button activation
Travel speeds, mph (km/h) 1st
Forward 3.8 (6.1)
Travel speeds, mph (km/h) 2nd
Forward 6.1 (9.8)
Travel speeds, mph (km/h) 3rd
Forward 13 (21)
Travel speeds, mph (km/h) 4th
Forward 24.3 (39.1)
Dimensions
Long Lip Bucket - 4 IN 1® Bucket
Height to: 19.5 L x 24 Tires - 17.5 L x 24 Tires
Top of canopy, ft/in (m) 8’ 12” (2.73) - 8’ 9” (2.67)
Top of cab, ft/in (m) 8’ 12” (2.74) - 8’ 10” (2.68)
Bucket hinge pin fully raised, ft/in (m) 11’ 2” (3.41)
Bucket hinge pin @ SAE carry, ft/in (m) 1’ 1” (0.33) - 1’ 3” (0.37)
Overall length w/ 3-point hitch, ft/in (m) 16’ 11” (5.15) - 16’ 8” (5.09)
Width over tires: 6’ 10” (2.07)
Dump angle @ full height 46° - 45°
Dump clearance @ full height, 45° dump: 9’ 8” (2.93) - 8’ 11” (2.71)
Clam open, ft/in (m) NA – 8’ 8” (2.63)
Dump reach @ full height, 45° dump:
Bucket, ft/in (m)
2’ 2” (0.66) - 2’ 2” (0.66)
Clam open, in (m) NA - 11.8 (0.29)
Ground clearance at front axle, in (m) 10.9 (0.28)
Wheelbase 4WD, ft/in (m) Wheelbase 2WD, ft/in (m) 7’ 1” (2.15) 7’0” (2.14) - 7’ 1” (2.15) 7’0” (2.14)
Reach from front axle centerline – bucket on ground, ft/in (m) 6’ 3’ (1.89) - 5’ 12” (1.83)
Maximum clam opening, ft/in (m) NA - 3’ 3” (0.97)
Moldboard height, ft/in (m) NA - 3’ 1” (0.93)
Lift capacity to full height, lb (kg) 6,503 (2950) - 6,537 (2965)
Breakout force, Lift cylinders, lb (N) 9,271 (41 239) - 8,766 (38 993)
Breakpout force, Dump cylinders, lb (N) 9,607 (42 734) - 10,325 (45 928)
Travel speeds, mph (km/h) 1st - 2nd
Forward 3.8 (6.1) - 6.1 (9.8)
Travel speeds, mph (km/h) 3rd - 4th
Forward 13 (21) - 24.3 (39.1)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics