Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Custer, South-Dakota

Do you need to rent heavy construction equipment and tools to get a job done in Custer? No problem, vendors in our vast network have a large inventory of work-ready equipment available for hire.

When you rent construction equipment from our vendors, they will drop the machinery off at your jobsite and pick it up when the job is complete. Yes, it’s that convenient.

To make it an even better proposition, you can hire equipment for any length of time. There are no restrictions on whether a contractor can rent an excavator, for instance, for just a day or a month!

Top of the line heavy construction equipment is now just a phone call away! Dial our toll free number today!

You can also contact us by submitting the contact form (on the right). Our vendors will contact you on the same day!

Equipment Rental Custer, Construction equipment rental Custer, Construction Custer, Heavy Equipment Rental Custer.

John Deere Crawler Dozers 700K XLT
Push productivity even harder.

When our customers sound off, we listen. So when you asked us to turn down the noise and turn up productivity on our 700K Crawler Dozer, we responded with a spacious, redesigned cab that’s noticeably quieter. And a more powerful EPA Interim Tier 4 (IT4)/EU Stage IIIB diesel engine.

Equipment owners and operators will also find lots more to like in the K-Series — such as a hydraulic-driven fan with optional reversing mode provides efficient cooling, reduces noise, and conserves precious fuel. Innovative V-Cool design provides convenient access to both sides of the coolers for easy cleanout. And a convenient sealed-switch module for fingertip control of numerous one-of-a-kind features and functions.

The K-Series are loaded with even more performance enhancements, like Total Machine Control (TMC). Standard on all of our K-Series Crawler Dozers, this performance-enhancing feature provides customized decelerator mode and response, forward/reverse ground-speed ranges, steering modulation, and more. It enables your operators to do their best, by being themselves.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech PVX 6068
Net Power, kW (hp) @ Rated rpm 93 (125) @ 2100
Displacement, L (cu in) 6.8 (414)
Transmission
Type Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8.9 (5.5)
Maximum Speeds Reverse, kph (mph) 8.9 (5.5)
Final Drives
Type Triple Reduction
Steering
Type No
Hydraulic System
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 95 (25)
System pressure, kPa (psi) not published
Undercarriage
Track Gauge, mm (ft in) 1983 (6 ft 6 in)
Length of Track on Ground, mm (ft in) 2590 (8 ft 6 in)
Standard shoe type Single Grouser - Standard
Ground Contact Area, cm sq (sq in) 39472 (6118)
Ground Pressure, kPa (psi) 35.2 (5.1)
No. of Track Rollers 7
Track Pitch, mm (in) 191 (7.5)
Track Shoes, each side 39
Track Oscillation Yes
Dozer
Blade Width, mm (ft in) 3353 (11 ft )
Blade Height, mm (ft in) 991 (3 ft 3 in)
SAE Blade Capacity, cu m (cu yd) 2.9 (3.8)
Blade Lift Height, mm (ft in) 991 (3 ft 3 in)
Digging Depth, mm (in) 533 (21)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 457 (1 ft 6 in)
Dimensions
Height w/ROPS, mm (ft in) 2936 (9 ft 8 in)
Length w/Dozer, mm (ft in) 4815 (15 ft 10 in)
Ground Clearance, mm (in) 393 (15.5)
Capacities
Fuel Tank, L (gal) 284 (75)
Hydraulic Reservoir, L (gal) 53.8 (14.2)
Weight
SAE Operating Weight, kg (lb) 14170 (31240)

Komatsu Dozers D61EXI-23

D61EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-2*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 170 HP 127 kW
(ISO 14396 169 HP 126 kW
ISO 9249 / SAE J1349 - Net 168 HP 125 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph
2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph
3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
Travel speed (variable mode) 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket teeth for easy displacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
HYDROSTATIC TRANSMISSION (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius (as measured by track marks on the ground at pivot turn.) 83"
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 8
Type of shoes (standard) Single grouser
Number of shoes (each side) 46
Grouser height 2.3" 57.5 mm
Shoe width (standard 34" 860 mm
Ground contact area 8,451 in² 54520 cm²
Ground pressure
(with dozer, ROPS canopy):
4.87 psi 33.6 kPa
0.34 kgf/cm²
Track gauge  7'0" 2130 mm
Length of track on ground 10'5" 3161 mm
SERVICE REFILL CAPACITIES
Coolant 11.9 U.S. gal 45 ltr
Fuel tank 98.3 U.S. gal 372 ltr
Engine oil 7.2 U.S. gal 27 ltr
Hydraulic tank 26.7 U.S. gal 101 ltr
Final drive (each side) 2.2 U.S. gal 8.1 ltr
Operating Weight approximate
Tractor weight Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D61EX-23 39,264 lb 17810 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
D61EX-23 39,441 lb 17890 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min / 45 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 280 kg/cm²
27.4MPa
Hydraulic cylinders 3,974
Hydraulic cylinders: Number of cylinders Bore
Blade lift 2 4"
100 mm
Blade tilt 1 5"
120 mm
Blade angle 2 4"
100 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 26.7 U.S. gal 101 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Komatsu Dozers D65WX-17 WH

D65WX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics