Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Morristown, Tennessee

Do you have a construction project coming up in Morristown ? In case you are new in business, have equipment at a far-off location or just understand the benefits of construction equipment rentals, we can be of great assistance!

Our vendors can have the construction equipment delivered at the jobsite within a day or two.You can also pick machines and tools from convenient locations in Morristown if you are in a position to move them on your own.

Dial our toll free number or fill out the contact form (on the right) to start receiving calls from some of the most reliable vendors in the region.

If the need be, you can personally visit the premises of any of the vendors and personally inspect their heavy construction equipment inventory to ascertain if the machines and tools are clean, latest and well maintained! We always encourage our customers to do that.

Equipment Rental Morristown, Construction equipment rental Morristown, Construction Morristown, Heavy Equipment Rental Morristown.

Unable to parse entered address. API response code: REQUEST_DENIED

A large number of construction industry and warehouse management professionals now look at forklift rentals in Mayville as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Mayville who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Komatsu Dozers D51EXi-22
D51EXi-22 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-1*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 133 HP 99 kW
ISO 9249 / SAE J1349 - Net 130 HP 97 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic(reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 3 emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed
(quick shift mode)
Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
Travel speed (variable mode) Forward Reverse
0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
FINAL DRIVE
Two-stage planetary gear integrated into axial piston travel motors. Compact in-shoe mount reduces risk of damage by debris. Bolt-on sprocket segments for easy replacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation. Hydrostatic Transmission (HST) eliminates steering clutches and brakes, providing smooth powerful turns. Fully electronic control enables smooth control. The PCCS utilizes shift buttons to increase and decrease speed.

 

Minimum turning radius* 7'10" 2.39 m
As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks: Unique seals help prevent entry of foreign abrasive material into pin to bushing clearances for long service life.
Parallel Link Undercarriage System (PLUS) Increased component size and strength, and rotating bushing design provide extended wear life and lower maintenance.
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser PLUS
Number of shoes (each side) 44
Grouser height 2.2" 56 mm
Shoe width (standard) 22" 560 mm
Ground contact area 4,752 in² 30643 cm²
Ground pressure
(with dozer, ROPS cab)
5.76 psi 0.41 kgf/cm² / 39.7 kPa
Track gauge 5'10" 1790 mm
Length of track on ground 9'0" 2736 mm
SERVICE REFILL CAPACITIES
Coolant 9.3 U.S. gal 35 ltr
Fuel tank 71.3 U.S. gal 270 ltr
Engine oil 5.3 U.S. gal 20 ltr
Hydraulic tank 16.6 U.S. gal 63 ltr
Final drive (each side) 1.1 U.S. ga 4.0 ltr
Operating Weight
Tractor weight: Including ROPS cab, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D51EX-22 24,074 lb 10920 kg
Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
D51EX-22 27,381 lb 12420 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26.2 U.S. gal/min at rated engine rpm.
Relief valve setting 3,983 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders   Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.54" 90 mm
Blade tilt / 1 3.94" 100 mm
Blade angle / 2 3.54" 90 mm
Hydraulic oil capacity (refilling):  
Power angle tilt dozer 16.6 U.S. gal l 63 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift  Raise, hold, and lower

If you own a construction company, run a warehouse or have a goods transport business in Meriden, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Meriden isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Meriden.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Meriden as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Meriden against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Meriden you wish to choose.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics