Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Croydon, Utah

We strive to provide each one of the contractors the best service possible. This is what makes us a preferredconstruction equipment rental network in Croydon.

One phone call at our toll free number followed by a quick discussion and there you go – you’d start receiving calls from reliable vendors having huge fleets of heavy construction equipment in no time.

The entire process is easy and involves no hassles because

  • Pick-ups and drop-offs are also handled by vendors if the need be
  • Rent agreements are flexible (daily, weekly or long term rental agreements can be signed)
  • Only work-ready machines are added to vendors’ rental fleet

Contact us today by dialing our toll free number or just submit a short online query through our contact form on the right.

Our customer service agents are here to help. You just have to ask.

Equipment Rental Croydon, Construction equipment rental Croydon, Construction Croydon, Heavy Equipment Rental Croydon.

Komatsu Dozers D37EX-23

D37EX-23 Crawler Dozer

Komatsu small dozers are great finish grading tractors for a lot of reasons but the most obvious is the super slant nose design. The super slant nose design moves the coolers and hydraulic fan to the rear and the operator forward to create a balance that makes fine grading with or without a grade control system a breeze. A fully hydrostatic drivetrain gives the operator incredibly quick and precise maneuverability. And new Power and Economy working modes allow the operator to adjust his machine's performance to his current job and save on fuel consumption as he's doing it. Like all Komatsu products, the D37EX-23 has the advanced hydraulics to make the addition of a grade control system seamless and turn it from a great grading tractor to an incredibly precise and fast fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 79" 2.0 m
*As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Unique seals minimize the entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 2,778 in² 17920 cm²
Ground pressure
(with standard shoe)
6.39 psi 0.45 kgf/cm² / 44.1 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 16,314 lb 7400 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 18,695 lb 8480 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 4"
80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Komatsu Dozers D65PX-17 WH

D65PX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110 mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Komatsu Trucks HM300-3
HM300-3 Articulated Truck

An operator who likes cycle quickly through any ground conditions and do it in comfort will love the HM300-3. Komatsu Traction Control System coupled to the power of the Tier 4 interim Komatsu engine and two working modes give the operator the tools they'll need and to complete their job efficiently and profitably. A center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor Provide the operator what he needs to operate productively in comfort for his full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 4.92" 125 mm
Stroke 5.91" 150 mm
Piston displacement 674 in3 11.04 ltr
Horsepower :
SAE J1995 332 HP 248 kW
ISO 9249 / SAE J1349 324 HP 242 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1239 ft lbs 1680 N 71 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 36.4 mph 58.6 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Minimum turning radius, wall to wall 26'7" 8.10 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 17.5 yd3 13.4 m3
Heaped (2:1, SAE) 22.4 yd3 17.1 m3
Payload 30.9 U.S. tons 28.0 metric tons
Material - high tensile strength steel 184,925 psi 130 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 17'3" x 8'10" 5250 mm x 2685 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 300 kg/cm2 / 29.4 Mpa
Hoist time 10.5 sec
Weight (approximate)
Empty weight 54,917 lbs 24,910 kg
Gross vehicle weight 116,823 lbs 52,990 kg
Weight distribution:
Empty:
Front axle 57.0%
Center axle 23.0%
Rear axles 20.0%
Loaded:
Front axle 29.0%
Center axle 36.5%
Rear axles 34.5%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 102.6 U.S. gal 388.3 L
Engine oil 9.2 U.S. gal 35 L
Torque converter, transmission and retarder cooling 25.9 U.S. gal 98 L
Differentials (total) 18.9 U.S. gal 71.5 L
Final drives (total) 6.1 U.S. gal 23 L
Hydraulic system 27.2 U.S. gal 103 L
Suspension (total) 2.7 U.S. gal 10.4 L

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics