Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Kanarraville, Utah

We strive to provide each one of the contractors the best service possible. This is what makes us a preferredconstruction equipment rental network in Kanarraville.

One phone call at our toll free number followed by a quick discussion and there you go – you’d start receiving calls from reliable vendors having huge fleets of heavy construction equipment in no time.

The entire process is easy and involves no hassles because

  • Pick-ups and drop-offs are also handled by vendors if the need be
  • Rent agreements are flexible (daily, weekly or long term rental agreements can be signed)
  • Only work-ready machines are added to vendors’ rental fleet

Contact us today by dialing our toll free number or just submit a short online query through our contact form on the right.

Our customer service agents are here to help. You just have to ask.

Equipment Rental Kanarraville, Construction equipment rental Kanarraville, Construction Kanarraville, Heavy Equipment Rental Kanarraville.

Toyota Forklift 4FD100

8 Series Internal Combustion Pneumatic Tier Forklift-4FD100

Cushion Tire

  • 22,000-35,000 lbs. Lifting Capacity @ 24 inch load center
  • Diesel

Every Toyota forklift undergoes the same world-renowned manufacturing process. Extra steps are always taken to ensure reliability and durability. Rest assured, these models are built to withstand the most demanding applications.

ERGONOMICS
  • Hydraulic seat-side pilot-type short-throw levers
  • Left-hand shift lever
  • Tilt steering column
  • Long operator assisted grips
  • Non-slip rubber floor mat
PARFORMANCE
  • EPA/CARB certified diesel engine
  • Hino 7.68 liter, 6 cylinder diesel engine (J08E-UM)
    • Common-rail electronic fuel injection system
    • Turbocharged and intercooled
    • Water cooled EGR valve
    • Quick-glow system
  • UL-D Conformity
  • 24 volt electrical system
  • Automatic 2 speed transmission with a 2 stator torque converter (2 FWD / 1 REV)
  • 2-function hydraulic control valve (lift and tilt)
  • Independent brake & inching pedals
  • Full hydraulic power steering with synchronized steering
  • Electric parking brake
  • Warning buzzer for parking brake (Release)
  • Upswept exhaust
  • Vinyl multifunction deluxe seat with armrests
  • Integrated monitoring system - includes
    • Hour meter display
    • Fuel gauge
    • Low fuel warning light
    • Engine coolant level warning light
    • Engine oil pressure warning light
    • Clogged air cleaner warning light
    • Battery charge warning light
    • Torque converter oil temperature warning light
    • Check engine light
    • Pre-heat indicator light
    • Sedimenter warning light
    • Brake warning light
    • SAS warning light (synchronized steering)
    • Engine water temperature indicator
    • Speedometer
    • Brake air pressure gauge
  • Lifting eyes (2 mast mounted and 2 counterweight mounted, not level)
  • 2 stage limited free lift wide visible mast (V)
  • Manual fork positioner (V mast only)
  • Headlights
  • Turn signal lights (4 lights)
  • Rear combination lights
  • Back-up lights
  • Rear working lights (2 lights)
  • Key off headlight and other electric components
  • Rear-view mirrors (right and left sides)
  • Rear-view mirror
  • Fuel tank cap with key
EASE OF SERVICE
  • Engine monitoring system
  • Centralized grease lubrication (mast, rear axle)
  • All wheel rotatable tires
SAFETY
  • Operator Presence Sensing System (OPSS)
  • Air horn
  • Asbestos free components
  • Neutral safety switch
  • Engine key stop
  • Overhead guard
  • ORS seat
DURABILITY
  • Wet disc brakes with dedicated oil cooling system
  • Air brakes with air dryer
  • AxleTech planetary drive axle
  • Rigidly constructed box type welded frame
  • Engine protection system
  • High cooling capacity radiator with fan shroud
  • Large capacity engine cooling fan
  • Fully oil charged lift cylinders
  • Rubber mounted Hydraulic system
  • Pin type forks
  • Low maintenance battery
  • Cyclone air cleaner
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.) Turning Radius (in.) Overall Truck Dimensions (in.)
Length Width Height
4FD100 22,000 168/2300 19.9 91 54 185 158 165.4 91.1 114

Toyota forklifts 8FGCU25

8 Series Internal Combustion-8FGCU25

Cushion Tire

  • 3,000-6,500 lbs. Lifting Capacity
  • Gas/LPG/CNG
  • System of Active StabilityTM (SAS)

The 8-Series cushion tire truck features major enhancements that improve every aspect of forklift operation. The exclusive System of Active StabilityTM (SAS) electronically monitors and controls the forklift's operations to help reduce the risk of tipovers. And innovative ergonomic design substantially improves operator comfort, performance and productivity.

ERGONOMICS
  • Dash mounted instrument display
  • 11.8" diameter two-spoke steering wheel
  • Hydrostatic power steering
  • Heavy-duty non-slip rubber floor mat
  • 12" long dual operator assist grips
  • Cowl-mount hydraulic control levers with rubber boot covers
  • Low wide entry steps
  • Low profile front cowl
  • Non-cinching seat belt
  • Dash integrated amenity tray and oversized cup holder
  • 4-way adjustable vinyl full-suspension seat
  • Slim profile, tilt steer column
PARFORMANCE
  • Toyota 136 cu. in., 4-cylinder, OHV gasoline engine (4Y-ECS)
  • Electronic fuel injection (gasoline only)
  • UL "G" gasoline engine
  • One-way automatic fork leveling
  • Independent brake & inching pedals
  • 2-stage limited free lift mast (V)
  • Integrated monitoring system - includes
    • Digital hour meter display
    • Engine coolant temperature gauge
    • Fuel gauge (gasoline only)
    • Check engine light
    • Engine oil pressure warning light
    • Battery charge warning light
    • OPSS activation light
    • SAS/OPSS warning light
  • Adjustable headlights with guards
  • Foot-activated parking brake
  • Alternator with built-in regulator
  • Transistorized ignition assembly
  • Automatic transmission with oil cooler
  • Full floating powertrain
  • Hydraulic valve lifters
  • Integrated head light and turn signal lever
  • Electric shift control
EASE OF SERVICE
  • Easy access no-tools floorboard
  • Engine hood assist damper with lock device
  • Air cleaner discharge valve
  • Externally mounted hydraulic oil return filter
  • Dash mounted brake fluid level check
  • Easy lift engine hood with wide 75 degree opening
SAFETY
  • System of Active StabilityTM (SAS)
  • Operator Presence Sensing System (OPSS)
  • Bolt-on overhead guard
  • Key lowering interlock
  • Electric horn
  • Neutral engine start safety switch
  • Asbestos free components
DURABILITY
  • Control Area Network (CAN-bus) communication
  • Fully-stamped steel side panels
  • Moisture resistant electric connectors
  • High cooling capacity radiator with fan shroud
  • Low maintenance battery
  • Large capacity engine cooling fan
  • 7" cyclone air cleaner with high positioned external air-intake (6" diameter on 8FGCU15.18.S20)
  • Plate iron front fenders
  • Anti-restart ignition key switch
  • Stamped steel engine hood
  • Fully-sealed air-intake system
  • Self-adjusting brakes
OPTIONS
Scale Option
  • Available on 4,000 lb. to 5,000 lb. Internal Combustion I.C. forklifts
  • Ideal for freight handlers, warehouses, and general shipping and receiving docks
  • Allows for simultaneous weighing and transportation of loads, resulting in increased efficiency and reduced logistic expenses.
  • Enables operators to quickly view, record or transfer legal-for-trade load weight information as the load is being transported through the facility.
  • Recessed Weight Sensors Offer Durability, Virtually No Maintenance
  • Accurate Measurement Helps Reduce Shipping Weight Discrepancies
  • Industry Exclusive Scale-Mounted Fork Positioner option
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.) Turning Radius (in.) Overall Truck Dimensions (in.)
Length Width Height
8FGCU25 5,000 51/2570 10.6 124 31 94.3 77.6 93.7 41.9 80.7

Toyota forklifts 8FG35U

8-Series Internal Combustion Pneumatic Tier Forklift-8FG35U

Large Capacity Pneumatic Tire

Toyota's highly anticipated line of 8-Series Large Capacity Pneumatic forklifts are now available in 8,000-17,500 lb. internal combustion pneumatic tire models. These trucks offer significant advancements in durability, ergonomics, productivity and fuel cost savings

ERGONOMICS
  • 11.8 diameter two spoke steering wheel provides greater legroom for operator.
  • Cowl-mounted hydraulic levers are ergonomically situated for improved operator comfort and unobstructed entry and exit from the right side of the truck.
  • 12 inch long dual operator assist grips have been designed to meet the needs of varying operator sizes.
  • Low profile front cowl results in enhanced forward visibility and lessens back pain by reducing the need of the operator to lean forward to view load and for tips.
PERFORMANCE
  • Toyota's 3.0 liter 4-cylinder engine with intercooled variable nozzle turbocharger and diesel oxidation catalyst meets the EPA Tier 4 final standard.
  • Toyota's new advanced engine provides optimal power with up to 30% reduced fuel consumption.
  • Independent brake and inching control pedals provide excellent stopping power and precise positioning of the forklift.
  • Automatic fork leveling improves operator efficiency and productivity while reducing product damage.
EASE OF SERVICE
  • Easy-lift hood with automatic assist damper to provide quick and easy access to engine
  • No-tool floorboard removes in seconds for quicker servicing
  • Brake fluid level check is conveniently mounted on the cowl for quick reference to expedite routine maintenance.
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tip overs
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tip overs
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
DURABILITY
  • Control Area Network (CAN-bus) communication provides quicker, more reliable control of the truck functions with fewer components.
  • Fully stamped steel side panels are thick to help withstand the harshest environments.
  • Moisture-resistant electrical connections are less susceptible to water intrusion and corrosion caused from pressure washing and high moisture environments.
  • Stamped steel engine hood provides maximum durability.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.)
8FG35U 8,000 87/2350 13.7 103 42 122.5

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics