Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Mantua, Utah

We strive to provide each one of the contractors the best service possible. This is what makes us a preferredconstruction equipment rental network in Mantua.

One phone call at our toll free number followed by a quick discussion and there you go – you’d start receiving calls from reliable vendors having huge fleets of heavy construction equipment in no time.

The entire process is easy and involves no hassles because

  • Pick-ups and drop-offs are also handled by vendors if the need be
  • Rent agreements are flexible (daily, weekly or long term rental agreements can be signed)
  • Only work-ready machines are added to vendors’ rental fleet

Contact us today by dialing our toll free number or just submit a short online query through our contact form on the right.

Our customer service agents are here to help. You just have to ask.

Equipment Rental Mantua, Construction equipment rental Mantua, Construction Mantua, Heavy Equipment Rental Mantua.

 John Deere Excavators 17D
Minimum tail swing, maximum versatility.

Sure, their compact sizes and reduced-tail-swing designs enable these small but mighty machines to specialize in close-quarters work. But that's not the only reason to run a 17D. Their highly fuel-efficient, direct-injected diesels are noticeably quiet so you can put them to work almost anywhere, anytime. Standard-equipped with backfill blade, mechanical quick-coupler, and auxiliary hydraulics, plus any of the many optional Worksite ProTM attachments, they can make a sizeable impact on your versatility. As well as your bottom line.

Engine
Emission Rating Tier 4
Engine Make / Engine Model Yanmar / 3 TNV 70
Net Power, kW (hp) @ Rated rpm 11 (14.8) @ 2400
Displacement, L (cu in) 0.85 (52)
HYDRAULIC SYSTEM
Pump Type Variable axial piston
Total Pump Flow, L/m (gpm) 38.4 (10.2)
Auxilliary Hyd. Max Flow Rate, L/m (gpm) not published
UNDERCARRIAGE
Track Width, mm (in) 230 (9)
Overall Track Length, mm (ft) 1570 (5 ft 2 in)
Ground Clearance, mm (in) 165 (6.5)
Width Over Std Track, mm (ft) not published
Ground Pressure, Std. Track, kPa (psi) 28 (4.1)
Max. Travel Speed - fwd, kph (mph) 4.3 (2.7)
BLADE
Blade Width, mm (ft) not published
Blade Height, mm (ft) 260 (10.2)
Blade Max Lift Above Grd. Level, mm (in) 285 (11.2)
Blade Max Lift Below Grd. Level, mm (in) 240 (9.4)
PERFOrMANCE
Standard Arm, mm (ft in) 930 (3 ft 1 in)
Max. Digging Height w/Std Arm, mm (ft) 3560 (11 ft 8 in)
Max. Digging Depth w/Std Arm, mm (ft) 2170 (7 ft 1 in)
Max. Digging Reach w/Std Arm, mm (ft) not published
Max. Dump Height w/Std Arm, mm (ft) 2530 (8 ft 4 in)
Min. Front Swing Radius, mm (ft in) 1540 (5 ft 1 in)
Boom Swing Angle - left, deg 70
Boom Swing Angle - right, deg 50
Lift Cap. Over Front @ 10' G.L. (incl bckt), kg (lb) 444 (979)
Lift Cap. Over Side @ 10' G.L. (incl bckt), kg (lb) 227 (500)
Max Arm Digging Force, kN (lb) 10.3 (2316)
Max Bucket Digging Force, kN (lb) 16 (3597)
Tail Swing Radius, mm (ft in) 675 (2 ft 3 in)
Swing Speed, rpm 8.9
TRASPORT SPECIFICATIONS
Transport Length, mm (ft) 3590 (11 ft 9 in)
Transport Height, mm (ft) 2400 (7 ft 11 in)
Transport Width, mm (ft) 970 (3 ft 2 in)
CAPACITIES
Fuel Tank, L (gal) 19.5 (5.2)
Hydraulic Reservoir, L (gal) 20.2 (5.3)
WEIGHT
SAE Operating Weight, kg (lb) 1893 (4173)

John Deere Wheel Loader 744K-II Final Tier 4

Productivity inspired.
Serious productivity demands serious thinking. Many of the numerous advantages of the 744K-II came from the brightest minds in the industry - our Customer Advocate Group. Armed with insights from loader owners and users like you, we equipped these productive material movers with larger new higher-capacity axles with standard axle cooling and filtration for heavy-duty maneuverability in the most demanding terrain. Self-adjusting wet-disc brakes for extended wear life and sure stops. Advanced on board diagnostics with pushbutton customization of machine operation and response. All to help increase productivity and uptime, while lowering daily operating costs. Owners, operators, and maintenance personnel will benefit from the big ideas found in the 744K-II loaders.

ENGINE
Engine Make / Engine Model John Deere / PowerTech PSS 6090
Emission Rating EPA Final Tier 4 / EU Stage IV
Net Power, kW (hp) @ Rated rpm 226 (303) @ 1500
Displacement, L (cu in) 9 (548)
Net Peak Torque, N-m (lb-ft) 1455 (1073)
Calculated % Torque Rise 50
ELECTRICAL
Volts 24
Alternator amps 130
TRANSMISSION
Type PowerShift
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 32.3 (20.1)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Single Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAuLIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 491 (130)
System Pressure, kPa (psi) 22670 (3288)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 4 (5.25)
Bucket Capacity Max., cu m (cu yd) 4.4 (5.75)
Breakout Force, Std Bucket, kN (lb) 19416 (42805)
Ride Control Yes
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 4 (5.25)
Tire Size Standard 26.5 R25
TIPPING LOAD
Straight, kg (lb) 19854 (43771)
Full Turn, kg (lb) 17137 (37782)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4280 (14 ft. 1 in.)
Dump Clear @ 45 deg, mm (ft in) 3040 (10 ft )
Reach @ 7', mm (ft in) 1850 (6 ft 1 in)
Reach @ Full Height, mm (ft in) 1230 (4 ft )
Wheelbase, mm (ft in) 3460 (11 ft 4 in)
Clearance Circle, mm (ft in) 14010 (46 ft 0 in)
Overall Length, mm (ft in) 9010 (29 ft 7 in)
Height to Top of Cab, mm (ft in) 3500 (11 ft 6 in)
Ground Clearance, mm (in) 462 (18.2)
CAPACITIES
Fuel Tank, L (gal) 477 (126)
Hydraulic Reservoir, L (gal) 165.3 (43.7)
WEIGHT
SAE Operating Weight, kg (lb) 25358 (55905)
Metric Ton Weight, kg (lb) 25.358 (55.905)

John Deere Wheel Loader 644K
Parallel lift that's simply unparalleled.

You don't have to sacrifice powerful digging forces to get parallel lift. The Wheel Loader 644K Powerllel - delivers the best of both, so you can have your loader and forklift, too. Unlike traditional tool-carrier linkages, our innovative design allows load forces to work with, not against, the boom, for big breakout force, even in difficult digging. Impressive torque throughout the entire dump and rollback range enables the 644K to excel at a wide variety of material-handling tasks.

FEATURES & SPECS

  • Final Tier 4 emission-certified engine
  • PowerShiftTM transmission
  • Z-Bar, High-Lift, and PowerllelTM configurations
  • NeverGreaseTM joints
Engine Power 173 kW (232 hp) @ 1,700 rpm
Bucket Capacity 3.2 m³ (4.25 cu. yd.)
Bucket Width 3.04 m (10 ft. 10 in.)
Breakout Force 13 798–15 440 kg (30,419–34,039 lb.)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics