Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Roy, Utah

We strive to provide each one of the contractors the best service possible. This is what makes us a preferredconstruction equipment rental network in Roy.

One phone call at our toll free number followed by a quick discussion and there you go – you’d start receiving calls from reliable vendors having huge fleets of heavy construction equipment in no time.

The entire process is easy and involves no hassles because

  • Pick-ups and drop-offs are also handled by vendors if the need be
  • Rent agreements are flexible (daily, weekly or long term rental agreements can be signed)
  • Only work-ready machines are added to vendors’ rental fleet

Contact us today by dialing our toll free number or just submit a short online query through our contact form on the right.

Our customer service agents are here to help. You just have to ask.

Equipment Rental Roy, Construction equipment rental Roy, Construction Roy, Heavy Equipment Rental Roy.

Driveable Stock Picker 15MSP

JLG Driveable Stock Picker 15MSP

Key Specs

  • Machine Width: 2 ft 6 in. / 0.75 m
  • Platform Height:15 ft 3 in. / 4.65 m

Key Features

  • Zero turning radius for superior maneuverability
  • Built-in automatic charger for less downtime on the job
  • One-hand operation for increased operator comfort
  • Driveable at full height for increased efficiency
Dimensional Data
Wheel Size - Front Caster 8 x 2.5"
Ground Clearance 2 in. / 0.05 m
Ground Entry Height 1 ft 6 in. / 0.46 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 4 ft 6 in. / 1.36 m
Machine Width 2 ft 6 in. / 0.75 m
Platform Dimension A 4 ft / 1.22 m
Platform Dimension B 2 ft 4 in. / 0.71 m
Platform Height 15 ft 3 in. / 4.65 m
Wheel SIze - Rear 12.62 x 4"
Reach Specifications
Platform Height 15 ft 3 in. / 4.65 m
Working Height 21 ft 3 in. / 6.48 m
Performance
Drive Speed - Platform Elevated 0.60 mph / 0.97 km/h
Drive Speed - Platform Lowered 4 mph / 5.63 km/h
Drive System 4 Brush Direct Electric
Gradeability 20 %
Maximum Drive Height 15 ft 3 in. / 4.65 m
Maximum Lift Height 15 ft / 4.65 m
Platform Capacity 500 lb / 226.80 kg
General
Machine Weight 2425 lb / 1099.96 kg
Power Source
Batteries 2 Sealed 100 amp-hr Glass Mat (AGM)

John Deere Scraper Systems 1510C
1510C
The 1510C Carry-All Scraper is a four-tire scraper that carries 15 cu yd of material and has a 10-ft cut width. This scraper works well for construction contractors who use 225-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 11 cu yd
Heaped capacity cubic yards 15 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 24 ft 10 in. 7569 mm
Width, ft, in. (mm) 11 ft 10 in. 3607 mm
Height, ft, in. (mm) 7 ft 6 in. 2286 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 10 ft 0 in. 3048 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 16,800 lb 7620 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28% PTO hp
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 17.5 X 25
Option 1 20.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 200 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

John Deere Scraper Systems 1512E
1512E
The 1512E Ejector Scraper is a four-tire scraper that carries 15 cu yd of material and has a 12-ft cut width. This scraper works well for construction contractors bulk-hauling materials using 225-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 11 cu yd
Heaped capacity cubic yards 15.5 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 28 ft 2 in. 8585 mm
Width, ft, in. (mm) 13 ft 5 in. 4089 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 12 ft 0 in. 3658 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 22,100 lb 10,024 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 24%
Wheels 76%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 200 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads Yes

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics