Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in New Haven, Vermont

With our construction equipment rental network having strong presence in New Haven, you now access to a broader range of equipments on all occasions. There is little initial investment involved as compared to leasing/buying and needless to mention, the construction equipment provided on rent is in excellent condition.

Everything from maintenance and insurance to transportation is handled by vendors and therefore, you’ve fewer issues to deal with. You can choose to transport the heavy machinery on your own if you want but most contractors just ask vendors to drop off and pick up equipment.

With us, you can expect the best rental rate and highly flexible rental terms. It does not matter if you represent a small, medium or large scale construction company. For us, each one of our customers is special.

Dial our toll free number today to learn more!

You can also submit an online query through the contact form (on the right) and we will put you in touch with reliable vendors with huge selection of construction equipment in no time.

Equipment Rental New Haven, Construction equipment rental New Haven, Construction New Haven, Heavy Equipment Rental New Haven.

JCB Wheel Loaders 437

437

The JCB 437 is designed to maximize efficiency and, with it, productivity. As such, it'll save you time, money and a whole lot more. Built using the finest components - a Cummins engine, ZF transmissions and axles, and Rexroth pumps - the 437 will last the distance. And, with 173hp (129kW), 591lbf (801Nm) and a 69 gal/min (264 l/min) hydraulic circulation, it'll perform to the max throughout. It's all-day comfortable - a comfortable operator is, after all, a productive one. It's also safe, serviceable and, with features like Eco mode and Auto Idle, it's highly fuel-efficient too.

Engine
Maximum Engine Power 173hp (129kW)
Loader Capacity
Maximum Loader Capacity 3.5yd3 (2.7m3)
Operating Weight 40534lb (18386kg)

Komatsu Wheel Loaders WA320-7
WA320-7 Wheel Loader

The WA320-7 marries a well proven hydrostatic drivetrain with Komatsu's industry leading Tier 4 interim engine technology that reduces fuel economy by up to 10%. The WA320-7 has a parallel lift boom with 10% more lift than the previous model and z-bar linkage for high breakout force for digging.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower:
Gross - SAE J1995 170 HP 127 kW
Net - ISO 9249/SAE J1349 165 HP 123 kW
Rated rpm 2100 rpm
Max power - ISO 14396 @ 1900 rpm 173 HP 129 kW
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Transmission Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed Forward Reverse
1st 0.6 - 8.1 mph 0.6 - 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.6 mph 11.6 mph
4th 23.6 mph 23.6 mph
Measured with 20.5-25 tires
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38.5° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 17'8" 5380 mm
Hydraulic System
Steering system:
Hydraulic pump Gear type pump
Capacity (at rated rpm) 29.1 U.S. gal/min 110 ltr/min
Relief valve setting 2,700 psi 18.6 MPa 190 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.8" x 17.8" 70 mm x 453 mm
Loader control:
Hydraulic pump Gear type pump
Capacity 20.6 U.S. gal/min 78 ltr/min
Relief valve setting 3,000 psi 20.6 MPa 210 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Boom cylinder / 2 5.1" x 28.2" 130 mm x 717 mm
Bucket cylinder / 1 5.9" x 19.3" 150 mm x 491 mm
Control valve 3-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 1.6 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 6.1 U.S. gal 23 ltr
Fuel tank 64.7 U.S. gal 245 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 23.7 U.S. gal 90 ltr
Axle front 7.1 U.S. gal 27 ltr
Axle rear 6.7 U.S. gal 25.5 ltr
Transfer case 1.5 U.S. gal 5.8 ltr

New Holland Compact Wheel Loaders W50B TC

Compact Wheel Loaders W50BTC

PRECISE CONTROL AND LOAD PLACEMENT.
New Holland compact wheel loaders provide a combination of increased versatility, increased comfort and control so you get the job done more quickly and efficiently. SMART precise load control and speed control improves operating efficiency. And these wheel loaders do much more than load. With big engine and hydraulic power and a choice of buckets and attachments, you can scrape, grade, haul and more.

Engine
Model Tier III certified FPT F5C
Horsepower, gross, hp (kW) 54 (41)
Horsepower, net, hp (kW) 50 (38)
Rated rpm 2,300
Torque, net (SAE J1349) 162 lb-ft @ 1400
Displacement, cu in (l) 195 (3 11)
Aspiration Natural
Transmission
1st Gear, mph 3.1
2nd Gear, mph 12.4
High travel speed (HTS) option engaged, mph. -
Hydraulic
Pump capacity, gpm (lpm) 13.7 (52)
System relief pressure, psi 3,625
Performance - bucket with quick coupler
Bucket capacity heaped, cu yd ( m³) .92 (.70)
Bucket capacity struck, yd (m) .73 (.56)
Breakout force, lbs (kg) 8,386 (3804)
Static tip load straight, lbs (kg) 7,377 (3346)
Static tip load full turn, lbs (kg) 6,489 (2944)
Operating weight, lbs (kg) 10,173 (4615)
Dump height, ft in (mm) 8’ 3” (2529)
Dump reach, in (mm) 33 (825)
Dimensions
Overall length 17′ 7″ (5360 mm)
Wheelbase 85.9″ (2182 mm)
Height to top of ROPS/Cab 8′ 10″ (2710 mm)
Dump reach at full height @ 45° 34″ (825 mm)
Dump reach @ 7’ and 45° dump 3′ 10″ (1172 mm)
Dump clearance at full height @ 45° 8′ 3″ (2529 mm
Hinge pin height 10′ 8″ (3243 mm)
Dig depth below grade 3.6″ (92 mm)
Ground clearance under axle 13″ (330 mm)
Width over tires 6′ 1″ (1841 mm)
Bucket rollback at carry 52°
Bucket rollback fully raised 54°
Turning radius 12′ 7″ (3847 mm)
Articulation angle 41˚

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics