Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Gordonsville, Virginia

Our construction equipment rental network in Gordonsville gives you instant access to a huge selection of heavy construction equipment including highly expensive and modern machines, that are otherwise used only by leading companies.

For rental enquiries, you can contact our team at the toll free number. Alternatively, you can submit a message through the contact form on the right. We will get in touch with you as soon as possible.

Why contractors trust our vendors:

  • Well maintained machines
  • The fleet is upgraded on a regular basis; old machines are sold out as used equipment
  • Construction equipment rental agreements are highly flexible
  • The equipment is moved to (and from) the jobsite if required
  • Construction equipment and tools are made available on short notice if the need be
  • There is no restriction on how much you want to rent (it can be just one machine or a full-fledged fleet for a big construction project)

Equipment Rental Gordonsville, Construction equipment rental Gordonsville, Construction Gordonsville, Heavy Equipment Rental Gordonsville.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D61EXI-23

D61EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-2*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 170 HP 127 kW
(ISO 14396 169 HP 126 kW
ISO 9249 / SAE J1349 - Net 168 HP 125 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph
2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph
3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
Travel speed (variable mode) 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket teeth for easy displacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
HYDROSTATIC TRANSMISSION (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius (as measured by track marks on the ground at pivot turn.) 83"
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 8
Type of shoes (standard) Single grouser
Number of shoes (each side) 46
Grouser height 2.3" 57.5 mm
Shoe width (standard 34" 860 mm
Ground contact area 8,451 in² 54520 cm²
Ground pressure
(with dozer, ROPS canopy):
4.87 psi 33.6 kPa
0.34 kgf/cm²
Track gauge  7'0" 2130 mm
Length of track on ground 10'5" 3161 mm
SERVICE REFILL CAPACITIES
Coolant 11.9 U.S. gal 45 ltr
Fuel tank 98.3 U.S. gal 372 ltr
Engine oil 7.2 U.S. gal 27 ltr
Hydraulic tank 26.7 U.S. gal 101 ltr
Final drive (each side) 2.2 U.S. gal 8.1 ltr
Operating Weight approximate
Tractor weight Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D61EX-23 39,264 lb 17810 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
D61EX-23 39,441 lb 17890 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min / 45 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 280 kg/cm²
27.4MPa
Hydraulic cylinders 3,974
Hydraulic cylinders: Number of cylinders Bore
Blade lift 2 4"
100 mm
Blade tilt 1 5"
120 mm
Blade angle 2 4"
100 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 26.7 U.S. gal 101 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Hiring a Backhoe for your construction or transportation business cannot be a spur of the moment decision since the market is flooded with different makes and models. Backhoes come with different features and different brands use different technologies; the end user may or may not always be familiar with the pros and cons of numerous designs, technologies and features.

Don't fret if your ignorance is mounting the pressure on business performance.

HeavyRentals.Equipment can help you find reliable Backhoe rentals in Scipio. Our nationwide network of Backhoe companies across more than 5,000 locations all across the United States; we can come to your rescue, whether you need to rent Backhoe for a day, week, or months together.

When you hire from us, you needn't worry about the quality and efficiency of the equipment. We offer you access to a massive inventory of ready to be hired Backhoes in Scipio. We have on board vendors having Backhoes of all top brands; we have tied up with a large number of reliable Backhoe rental dealers in Scipio region already. So, you don't have to spend time researching, screening and interviewing vendors.

Before recommending a Backhoe rental company in Scipio, our team will personally assess your business needs and requirements. These requirements will be broken down into weight capacity, lift height, surface available for movement of the Backhoe, turning radius required, and of course your budget. You can narrate your requirements to our support team by dialing our helpline number, and also get free Backhoe rental estimates.

While we are here to make suitable suggestions, we let our clients have full control over their choices in renting Backhoes. When you rent with us be sure the Backhoe have been inspected to US safety standards.

JCB Light Equipment HM22

HM22

This is a medium-duty breaker for general demolition, concrete and asphalt breaking.

    • 22 l/min max flow rate
    • Weight 21 kg
    • Vibration (BS8622-5) 3.4 m/s2
    • Vibro damped handle provides one of the lowest vibration levels of any equivalent breaker
    • Sealed hydraulic system results in low noise (no exhaust port) and elimination of freezing problems
    • Very robust cast steel construction for maximum strength and durability
    • High reliability and long service life - only two moving parts and constant lubrication by hydraulic oil
Fuel Tank
Fuel Tank Size 400gallons (8000litres)
Fuel Tank Type Diesel
Engine
Capacity 3cc

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics