Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Brule, Wisconsin

Whether you need to complete just one job at hand or are in need of heavy construction equipment rentalsin Brule on a regular basis, we have the necessary expertise and inventory to assist you in completing a construction project from start to finish.

Since we have equipment rental locations all over, you need not worry about the transportation costs. Our vendors will either take care of pick-ups and drop-offs or you can move heavy machinery from convenient locations to your jobsite.

Dial our toll free number today; with our vendors, we will help you find the right piece of equipment or heavy machinery for your local job in as little as one day!

You can also contact us by posting an online query through the contact form (on the right). Rest assured - there are no obligations attached until you agree to sign on the dotted line.

Equipment Rental Brule, Construction equipment rental Brule, Construction Brule, Heavy Equipment Rental Brule.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Komatsu Trucks 860E-1K

860E-1K Electric Drive Truck

The 860E-1K utilizes Komatsu Drive with Siemens AC control and liquid cooled Insulated Gate Bipolar Transistor (IGBT) inverter system for the highest available reliability. Hill Start allows the operator to start on a grade without roll back. Traction control assists the operator to power through wet sloppy underfoot condition. Oil cooled multi-disc brakes and retarder give the operator confidence in his control and stopping ability, especially when fully loaded. A front mounted elevating pantagraph can be mounted to allow the Komatsu Trucks 860E-1K to utilize electrified overhead trolley lines.

Engine
Make and model Komatsu SSDA16V160 Tier 2
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower* @ 1900 rpm 2,700 HP 2014 kW
Net flywheel power** @ 1900 rpm 2,550 HP 1902 kW
Weight (wet) 21,182 lb 9608 kg
* Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer’s approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
**Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Drive System* Komatsu AC Drive
Alternator DRLDZ5010-AL
Dual Fan Main Blower 14,800 cfm 419 m³/min
Control IGBT AC Torque Control System
Ratio 35.52:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor drive system application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, radial tires:
Standard tire* 50/80 R57
Optional tire* 50/90 R57
Flange mount rim 34'' x 57'' x 6'' rim assembly 864 mm x 1448 mm x 152 mm rim assembly
Typical total tire weight 50,780 lb 23033 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Tapered body, body up sling and frame mounted rubber pads are standard. Heated body optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.39' 10 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.31'' 8 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel
0.24'' 6 mm
Capacity struck 160 yd³ 122 m³
SAE heaped 2:1 221 yd³ 169 m³
Standard Komatsu body weight 74,171 lb 33643 kg
Cab
Advanced Operator Environment with isolation mounted, integral 4- post ROPS/FOPS Level 2 structure. Adjustable air suspension seat w/lumbar support, arm rests, and 3-point seat belt, full-size passenger seat, thermal insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.57'' 40 mm
Side plate thickness / Rear 0.75'' 19 mm
Side plate thickness / Front 0.87'' 22 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Max. service apply pressure 2,400 psi 16547 kPa
Total friction area per brake 11,693 in² 75439 cm²
Secondary brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade at maximum gross vehicle weight.
Electric dynamic retarder 4,650 hp 3469 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.32'' 313 mm
Max. rear stroke 11.50'' 292 mm
Max. rear axle oscillation 10.4°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank.
Radiator frontal area 62.5 ft² 5.81 m²
Service Capacities
Cooling System 125 U.S. gal 473 L
Crankcase 74 U.S. gal 280 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 32 U.S. gal 121 L
Inverter cooling system 6.5 U.S. gal 25 L
Fuel 1,200 U.S. gal 4542 L
Reserve Oil® System 30 U.S. gal 114 L
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 102' 31 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 22 sec
Power-down (high idle) 13 sec
Float-down (low idle) 23 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 17237 kPa / 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 18960 kPa / 2,750 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Quick disconnects standard for powering disabled truck and for systems diagnostics.
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24 volt, 140 amp
Lighting 24 volt
Cranking motors Two/24 volt

John Deere Articulated Dump Trucks 370E
Supersize your productivity.

Equipment owners and operators such as you gave us plenty of big ideas for our reimagined E-Series. The 370E comes loaded with a John Deere EPA Interim Tier 4 (IT4) diesel engine. Purpose-built transmissions with eight forward and four reverse gears. Heavy-duty John Deere-built axles with wet-disc brakes. Standard adaptive suspension. Numerous automated functions for simplified operation. And ground-level daily and periodic servicing. With the E-Series, you get everything you need to boost productivity and uptime, and reduce your daily operating costs. Big time.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech 6135
Net Power, kW (hp) @ Rated rpm 315 (422) @ 1900
Displacement, L (cu in) 13.5 (824)
Calculated Torque Rise (percentage) --
Transmission
Transmission Manufacturer John Deere
Transmission Type Powershift
Number of Gears Forward and Reverse 8F - 4R
Max. Travel Speed - fwd, kph (mph) 53 (33)
Max. Travel Speed - rev, kph (mph) 16 (10)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Cross-axle Diff Lock
Brakes
Service Brake Type Wet Multi Disc
Engine Brake Transmission
Retarder Other Type --
Parking Brake Type Spring Applied / Hydraulically Released
Suspension
Front Type A-Frame
Front Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Rear Type Pivoting Walking Beam
Rear Suspension Rubber Suspension Blocks
Load Body
Construction Standard
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 13
Body Tipping Time to Lower seconds 7
Tip Cylinders Type Twin 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.1
Secondary Steering Type Yes
Dimension
Overall Length, mm (ft in) 10810 (35 ft 6 in)
Overall Tire Width, mm (ft in) 3440 (11 ft 3 in)
Overall Height, mm (ft in) 3810 (12 ft 6 in)
Loadover Height, mm (ft in) 3260 (10 ft 8 in)
Approach Angle degrees 24
Outside Turning Radius, mm (ft in) 8900 (29 ft 2 in)
Inside Turning Radius, mm (ft in) 4630 (15 ft 2 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 26.5 R25
Capacities
Fuel Tank, L (gal) 609 (161)
Hydraulic Reservoir, L (gal) 242 (64)
Payload
Capacity Struck, cu m (cu yd) 16.3 (21.3)
Capacity Heaped SAE 2:1, cu m (cu yd) 20.5 (26.8)
Weight
Operating Weight Empty, kg (lb) 30782 (67862)
Payload Weight, kg (lb) 33630 (74141)
Gross Weight, kg (lb) 64412 (142003)
Gross Weight, kg (lb) 64412 (142003)

John Deere Wheel Loader 524K WH High Lift
ThinK. Again.

Although they don't appear all that different from their standard-setting predecessors, the K-Series Loaders are loaded throughout with even more customer-inspired enhancements: spacious, quieter cab with unsurpassed visibility, expanded sealed-switch module, secured key-less start, and easier-to-read LCD monitor with advanced onboard diagnostics.

You have more choices, too, including the 2¾-yard 524K, NeverTM pins, and automatic diff-lock axles, to list just a few. Exceptional productivity, long-term durability, unparalleled versatility - you get it all in the John Deere K-Series.

ENGINE
Engine Make / Engine Model John Deere / PowerTech E6068H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 110 (146) @ 2000
Displacement, L (cu in) 6.8 (414)
Net Peak Torque, N-m (lb-ft) 607 (448)
Calculated % Torque Rise 47
ELECTRICAL
Voltage 24
Alternator amps 80
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 35.7 (22.2)
Max. Travel Speed - rev, kph (mph) 24.1 (15)
DIFFERENTIAL
Traction Device - Front / Rear Yes / No
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic, self adjusting
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 165 (44)
System Pressure, kPa (psi) 24994 (3625)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) not published
Bucket Capacity Max., cu m (cu yd) not published
Breakout Force, Std Bucket, kN (lb) 72.48 (16294)
Ride Control --
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 3.1 (4)
Tire Size Standard 20.5 - 25
TIPPING LOAD
Straight, kg (lb) 8875 (19565)
Full Turn, kg (lb) 7698 (16972)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4180 (13 ft 9 in)
Dump Clear @ 45 deg, mm (ft in) 3030 (9 ft 11 in)
Reach @ 7', mm (ft in) 1680 (5 ft 6 in)
Reach @ Full Height, mm (ft in) 990 (3 ft 3 in)
Wheelbase, mm (ft in) 2930 (9 ft 7 in)
Clearance Circle, mm (ft in) 12150 (39 ft 10 in)
Overall Length, mm (ft in) 7750 (25 ft 5 in)
Height to Top of Cab, mm (ft in) 3310 (10 ft 10 in)
Ground Clearance, mm (in) 460 (18)
CAPACITIES
Fuel Tank, L (gal) 325 (86)
Hydraulic Reservoir, L (gal) 91 (24)
WEIGHT
SAE Operating Weight, kg (lb) 15563 (34311)
Metric Ton Weight, kg (lb) 15.563 (34.311)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics