Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Cochrane, Wisconsin

Whether you need to complete just one job at hand or are in need of heavy construction equipment rentalsin Cochrane on a regular basis, we have the necessary expertise and inventory to assist you in completing a construction project from start to finish.

Since we have equipment rental locations all over, you need not worry about the transportation costs. Our vendors will either take care of pick-ups and drop-offs or you can move heavy machinery from convenient locations to your jobsite.

Dial our toll free number today; with our vendors, we will help you find the right piece of equipment or heavy machinery for your local job in as little as one day!

You can also contact us by posting an online query through the contact form (on the right). Rest assured - there are no obligations attached until you agree to sign on the dotted line.

Equipment Rental Cochrane, Construction equipment rental Cochrane, Construction Cochrane, Heavy Equipment Rental Cochrane.

John Deere Scraper Systems 1510C
1510C
The 1510C Carry-All Scraper is a four-tire scraper that carries 15 cu yd of material and has a 10-ft cut width. This scraper works well for construction contractors who use 225-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 11 cu yd
Heaped capacity cubic yards 15 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 24 ft 10 in. 7569 mm
Width, ft, in. (mm) 11 ft 10 in. 3607 mm
Height, ft, in. (mm) 7 ft 6 in. 2286 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 10 ft 0 in. 3048 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 16,800 lb 7620 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28% PTO hp
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 17.5 X 25
Option 1 20.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 200 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

SkyTrak® Telehandler 6042

JLG SkyTrak® Telehandler 6042

 

Key Specs

  • Maximum Lift Capacity: 6000 lb / 2721.55 kg
  • Maximum Lift Height: 41 ft 11 in. / 12.78 m
  • Maximum Reach: 27 ft 11 in. / 8.51 m

Key Features

  • Sealed bearings extend service intervals for lower maintenance costs
  • Re-designed cab for improved operator comfort and safety
  • Stabil-Trak stability system for increased operator confidence
PERFORMANCE
Breakout Force 24500 lb / 11113.01 kg
Drawbar Pull 22000 lb / 9979.03 kg
Frame Leveling 10 Degrees
Lift Capacity at Full Height 6000 lb / 2721.55 kg
Lift Capacity at Max Reach (Stabs Up) 1400 lb / 635.03 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 6000 lb / 2721.55 kg
Maximum Lift Height 41 ft 11 in. / 12.78 m
Maximum Reach 27 ft 11 in. / 8.51 m
Outriggers or Stabilizers No
Outside Turning Radius 13 ft 9 in. / 4.19 m
Speed - Maximum Lift 17 sec.
Speed - Maximum Lower 13 sec.
Speed - Maximum Telescope In 19 sec.
Speed - Maximum Telescope Out 19 sec.
Speed - Maximum Travel 19 mph / 30.74 km/h
dimensional data
Ground Clearance 1 ft 4 in. / 0.41 m
Machine Height 8 ft 6 in. / 2.59 m
Machine Length 18 ft 4 in. / 5.59 m
Machine Width 8 ft 3 in. / 2.51 m
Tire Size 370/75-28
Track Width 7 ft / 2.13 m
Wheelbase 9 ft 5 in. / 2.87 m
power source
Capacity - Fuel Tank 35 gal. / 132.49 L
Engine Horsepower 85 hp / 63.41 kW
Engine Manufacturer Cummins
Engine Model QSB3.3L
Maximum Engine RPM 2600 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Gear
Hydraulic System Pressure 3000 psi / 210.09 Kg/cm2
Operating Vehicle Weight 23740 lb / 10768.28 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

John Deere Scraper Systems 1512E
1512E
The 1512E Ejector Scraper is a four-tire scraper that carries 15 cu yd of material and has a 12-ft cut width. This scraper works well for construction contractors bulk-hauling materials using 225-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 11 cu yd
Heaped capacity cubic yards 15.5 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 28 ft 2 in. 8585 mm
Width, ft, in. (mm) 13 ft 5 in. 4089 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 12 ft 0 in. 3658 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 22,100 lb 10,024 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 24%
Wheels 76%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 200 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads Yes

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics