Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Komatsu Excavators PC170LC-10

Komatsu Excavators PC170LC-10

PC170LC-10 Hydraulic Excavator

The PC170LC-10 Hydraulic Excavator is a highly versatile machine for all types of jobs which require a smaller machine with big power. Six working modes including a new attachment/economy mode allow the operator to tailor his machine's performance to the type of challenge he's facing. A new larger cab and heated, higher capacity operator's seat makes the operator more comfortable and productive. A standard rear camera linked to the 7" color monitor panel allows the operator to see what is behind his revolving frame. Using the standard pattern change control valve, the operator can operate his joysticks in the operating pattern he is most comfortable with. Two counterweight options are available to match customer needs. The light option is for easier transportability on a tag trailer, while the heavier option is for greater stability when the machine is equipped with items such as a bucket/coupler/thumb combination.

Engine
Model Komatsu SAA4D107E-2*
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, and air-to-air aftercooled
Number of cylinders 4
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 272 in³ 4.46 ltr
Horsepower:
Gross (SAEJ1995) @ 2100 rpm 121 HP 90 kW
Net (ISO 9249/SAEJ1349) @ 2100 rpm 115 HP 86 kW
Governor All speed control, electronic
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow
Air cleaner Air cleaner, double element and auto dust evacuatorr

*EPA Tier 4 Interim and EU stage 3B emissions certified

Hydraulics
Type HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve
Main pump:
Type Variable capacity piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 79 gal/min 298 ltr/min
Hydraulic motors:
Travel 2 x piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,450 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,195 psi 295 kgf/cm² / 28.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders bore x stroke x rod diameter bore x stroke x rod diameter
Boom / 2 4.3" x 46.3" x 3.0 110 mm x 1175 mm x 75 mm
Arm / 1 4.7" x 52.8" x 3.3" 120 mm x 1342 mm x 85 mm
Bucket / 1 4.1" x 40.4" x 2.8" 105 mm x 1027 mm x 70 mm
Drives and Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Maximum drawbar pull 35,164 lb 15950 kgf / 156 kN
Gradeability 35° 70%
Maximum travel speed:
High 3.4 mph 5.5 km/h
Low (Auto-Shift) 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc
Swing System
Drive method Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Mechanical disc brake
Swing speed 12.0 rpm
Swing torque 31,314 ft lbs 4331 kg•m
Undercarriage
Center frame X-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes (each side) 44
Number of carrier rollers (each side) 2
Number of track rollers (each side) 7
Coolant and Lubricant Capacity refilling
Fuel tank 79.25 U.S. gal 300 ltr
Coolant 4.9 U.S. gal 23.5 ltr
Engine 4.8 U.S. gal 18 ltr
Final drive, each side 1.43 U.S. gal 5.4 ltr
Swing drive 1.2 U.S. ga 4.5 ltr
Hydraulic tank 32.0 U.S. gal 121 ltr
Operating Weight (APROXIMATE)
Operating weight including 5150 mm / 16'11" one-piece boom, 2610 mm / 8'7" arm, SAE heaped 0.65 m³ / 0.85 yd³ backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes: Operating Weight: Ground Pressure:
24" 600 mm 38,600 lb
17500 kg
5.98 psi
0.42 kgf/cm² / 41.2 kPa
28" 700 mm 39,104 lb
17739 kg
5.06 psi
0.37 kgf/cm² / 36.2 kPa

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics