New Holland Skid Steer Loader L230

THE SUPER^® ADVANTAGE
New Holland's patented Super Boom^® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model	FPT / F5H413
Bore/stroke, in (mm)	3.9 x 4.1 (99 x 110)
Displacement, in3 (L)	207.5 (3.4)
Fuel injection	HPCR Direct
Air intake	Turbocharged Aftercooled with external CEGR
Horsepower per SAE J1349 Gross hp (kW)	90 (67) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW)	84 (63) @ 2500 rpm
Peak torque, lb-ft (Nm)	282 (383) @ 1400 rpm

Power Train
Travel speed, low range, mph (km/h)	7.7 (12.4)
Travel speed, high range (optional),mph (km/h)	11.5 (18.5)

Dimensions
HEIGHT TO
Bucket hinge pin, in (mm)	131.1 (3327)
Top of ROPS, in (mm)	80.4 (2042)
Bottom of level bucket, fully raised,in (mm)	124.2 (3155)
Overall length without attachment with coupler, in (mm)	117.6 (2986)
Dump angle, degrees	55°
Dump reach (max height), in (mm)	30.7 (781)
Rollback, bucket on ground, degrees	33°
Rollback, bucket at full height, degrees	85°
Wheelbase, in (mm)	52 (1322)
Ground clearance (bottom of belly pan),in (mm)	9.5 (243)
Angle of departure, degrees	27°
Clearance circle without bucket, in(mm)	56.2 (1428)
Clearance circle rear, in (mm)	70.4 (1789)
Rear axle to bumper, in (mm)	40.7 (1034)
Overall width, in (mm)	76 (1930)

Hydraulic System
Pump flow, Standard Flow, gpm (Lpm)	24.2 (91.5)
Relief pressure, psi (bar)	3046 (210)
Optional high flow, gpm (Lpm)	37.6 (142.5)

Performance Specs
Rated operating load, 50% tip, lbs (kg)	3000 (1360)
Tipping load, lbs (kg)	6000 (2722)
Breakout force, lift cylinder, lbs (kN)	6350 (28.2)
Breakout force, bucket cylinder, lbs (kN)	8620 (38.3)
Operating weight, lbs (kg)	8300 (3765)