get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Dewey, Arizona

Our vendors have been servicing the Dewey area for many years now and have a solid reputation of providing the latest, high performance heavy construction equipment on rent. If you are about to get started with a construction project in the region, let us help you with provisioning of construction equipment in a time bound manner.

Since we've a huge network of vendors with a proven track record of providing the best equipment on hire to small as well as large construction industry players, rest assured that the inventory of equipment is more than enough to meet your varied requirements!

You can communicate your requirements right away by dialing our toll free number or get in touch through the contact form on the right.

We will patiently hear you out, learn about your construction project at hand or ongoing requirements and provide you with the best options to choose from.

Equipment Rental Dewey, Construction equipment rental Dewey, Construction rental Dewey, Heavy Equipment Rental Dewey.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Wheel Loaders WD600-6
WD600-6 Wheel Dozer

High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.

Engine
Model Komatsu SAA6D170E-5*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Hydraulic fan at maximum speed - Net 502 HP 374 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter:
Type 3-element, single-stage, double-phase
Transmission:
Type Full-powershift, planetary type
Travel speed Measured with 35/65-33 tires
Speed: Forward
(Lock-up clutch ON)		 Reverse
1st 4.2 mph
6.7 km/h		 4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h(7.7 mph
12.4 km/h)		 8.0mph
12.8 km/h
3rd 12.6 mph
20.3 km/h(13.5 mph
21.7 km/h)		 13.7 mph
22.0 km/h
4th 20.5 mph
33.0 km/h(23.4 mph
37.7 km/h)		 22.4 mph
36.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 34.3 MPa
350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 5.1" x 20" 130 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 47.6 + 47.6 U.S. gal/min 180 + 180 ltr/min
Relief valve setting 3,560 psi 24.5 MPa 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Blade lift - 1 6.3" x 42.5" 160 mm x 1080 mm
Tilt and pitch - 2 7.0" x 9.3" 180 mm x 237 mm
Control valve 3-spool type
Control positions:
Blade lift Raise, hold, lower, and float
Tilt and pitch Tilt-left, tilt-right, hold, pitch forward and back
Hydraulic cycle time
Raise 2.0 sec
Lower 1.3 sec
Tilt (left / right) 0.8 / 1.1 sec
Pitch (front / rear)mage 2.1 / 1.6 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle:
Front 41.0 U.S. gal 155 ltr
Rear 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

Komatsu Wheel Loaders WA200-7
WA200-7 Wheel Loader

If your operators want lots of power but with complete control in a small package, the WA200-7 is a machine they'll love. Hydrostatic drive gives the WA200-7 the advantage of having a fully automatic drive system without the weight and wear of a torque converter and geared transmission. The result is quick response, lots of power to dig and climb, the ability to control traction level and dynamic braking which saves wear on the wet multi-disc brakes.

Engine
Model Komatsu SAA4D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 4
Bore x stroke 107 mm x 124 mm 4.21" x 4.88"
Piston displacement 4.46 ltr 272 in³
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 95.2 kW 128 HP
ISO 9249/SAE J1349 / Net 94 kW 126 HP
Hydraulic fan at maximum speed / Net 91 kW 122 HP
Rated rpm 2000 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Type . . . . . . . Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed
(Measured with 20.5-25 tires):		 Both Forward and Reverse
1st 5.2 - 14.3 km/h 3.2 - 8.9 mph
2nd 14.3 km/h 8.9 mph
3rd 23.2 km/h 14.4 mph
4th 38.0 km/h 23.6 mph
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Secondary brake One of dual service brake circuits is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 4880 mm 16'0"
Hydraulic System
Steering system:
Hydraulic pump Gear type pump
Capacity (at rated rpm) 85 ltr/min 22.5 U.S. gal/min
Relief valve setting 20.6 MPa 210 kgf/cm² 3,000 psi
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 70 mm x 453 mm 2.76" x 17.8"
Loader control:
Hydraulic pump Gear type pump
Capacity 54 ltr/min 14.3 U.S. gal/min
Relief valve setting 20.6 MPa 210 kgf/cm² 3,000 psi
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 125 mm x 673.5 mm 4.9" x 26.5"
Bucket cylinder - 1 130 mm x 493 mm 5.1" x 19.4"
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 1.9 sec
Lower (Empty) 3.2 sec
Service Refill Capacities
Cooling system 24.6 ltr 6.5 U.S. gal
Fuel tank 177.0 ltr 46.8 U.S. gal
Engine 15.5 ltr 4.1 U.S. gal
Hydraulic system 58.0 ltr 15.3 U.S. gal
Axle front 18.5 ltr 4.9 U.S. gal
Axle rear 18.0 ltr 4.8 U.S. gal
Transfer 5.0 ltr 1.3 U.S. gal

Komatsu Wheel Loaders WA600-6 Steel Mill
WA600-6 Steel Mill Wheel Loader

Komatsu-integrated design for exceptional value, reliability and versatility. Hydraulics, powertrain, frame, and all other major components are engineered by Komatsu. You get a machine whose components are designed to work together for higher production and reliability. Now add the Komatsu designed Steel Mill Arrangement with guarding and heat protection specifically matched to the WA600-6 resulting in a loader that handles hot slag and stays working longer for increased productivity.

Engine
Model Komatsu SAA6D170E-5
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter Type 3-element, single-stage, double-phase
Transmission Type Full-powershift, planetary type
Travel speed measured with 35/65-33 tires: Forward Reverse
1st 4.2 mph
6.7 km/h		 4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h		 8.0 mph
12.8 km/h
3rd 12.6 mph
20.3 km/h		 13.7 mph
22.0 km/h
4th 21.0 mph
33.8 km/h		 23.0 mph
37.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 4.5" x 20" 115 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 63.1 + 63.1 U.S. gal/min 239 + 239 ltr/min
Relief valve setting 4,980 psi 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom cylinder / 2 7.9" x 42" 200 mm x 1067 mm
Bucket cylinder / 1 8.9" x 30.6" 225 mm x 776 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 9.3 sec
Dump 2.3 sec
Lower (Empty) 4.1 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle (each front and rear) 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics