get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Oak Park, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Oak Park, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Oak Park, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Oak Park, Construction equipment rental Oak Park, Construction rental Oak Park, Heavy Equipment Oak Park.

Unable to parse entered address. API response code: REQUEST_DENIED

Electric Scissor Lift M3369LE

JLG Electric Scissor Lift M3369LE
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75 m
  • Platform Capacity: 1000 lb / 453.59 kg
  • Platform Height: 33 ft / 10.06 m

Key Features

  • Superior performance on or off slab
  • Rugged terrain tires take you anywhere you want to go
  • With optional hydraulic leveling jacks, uneven terrain is no problem
  • Double the duty cycle of other scissor lifts so you can stay on the job longer
Power Source
Batteries 8 x 6V, 370 amp-hr
Charger 21 amp Automatic
Fuel Tank Capacity - Diesel 4 gal. / 15.14 L
Generator (Brand / HP / Fuel Type) Kubota / 6 HP / Diesel
General
Brakes Spring Applied Hyd. Released Discs
Capacity - Hydraulic Reservoir 9 gal. / 32.18 L
Ground Bearing Pressure 57 psi / 3.99 Kg/cm2
Hydraulic Pump Single Section Gear Pump
Machine Weight 10060 lb / 4563.14 kg
Performance
Drive Speed - Platform Elevated 0.40 mph / 0.64 km/h
Drive Speed - Platform Lowered 3 mph / 4.83 km/h
Gradeability - 2WD 35 %
Gradeability - 4WD 45 %
Lift Time 38 sec.
Lower Time 42 sec.
Maximum Drive Height 33 ft / 10.06 m
Maximum Lift Height 33 ft / 10.06 m
Platform Capacity 1000 lb / 453.59 kg
Platform Capacity - Extension 250 lb / 113.40 kg
Turning Radius - Outside 15 ft 6 in. / 4.72 m
Dimensional Data
Ground Clearance 8 in. / 0.2 m
Machine Height 9 ft / 2.74 m
Machine Height - Rails Folded 6 ft 5 in. / 1.96 m
Machine Length 10 ft 2 in. / 3.1 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 9 ft 7 in. / 2.92 m
Platform Dimension B 5 ft 5 in. / 1.65 m
Platform Extension Length 3 ft / 0.91 m
Platform Height 33 ft / 10.06 m
Platform Height - Lowered 5 ft 7 in. / 1.69 m
Platform Railing Height 3 ft 8 in. / 1.1 m
Tire Size 240/55 x 17.5 Non-Marking
Wheelbase 7 ft 7 in. / 2.3 m
Reach Specifications
Platform Height 33 ft / 10.06 m
Working Height 39 ft / 11.89 m

Komatsu Dozers D39EX-23
D39EX-23 Crawler Dozer
Need a great grading tractor with plenty of power and a cab your operators will fight over. You've found it with the D39EX-23. The super slant nose moves the coolers and hydraulic fan to the rear, the operator more forward and the result is a new way of balancing a dozer to make it an incredibly easy tractor to finish grade with. Add a more efficient, fully hydrostatic drivetrain for precise maneuverability and control, two working modes for more efficient work matching and fuel savings and fuel efficient Tier 4 interim engine technology and you have everything you want and need in a small dozer. Put your grade control system on it and you have a high speed yet very precise fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic (reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h		 0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h		 0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h		 0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510
Ground contact area 3,708 in² 23919 cm²
Ground pressure
(with dozer, ROPS cab)		 5.60 psi 0.39 kgf/cm² / 37.8 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'8" 2345 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,210 lb 8860 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,749 lb 9410 kg
hydraulic system 
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders   Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.6" 90 mm
Blade angle / 2 3.1" 80 mm
Blade pitch 1 adjustable linkage
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle  Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift   Raise, hold, and lower

John Deere Crawler Dozers 1050K
When you weigh all your options, you'll choose a 1050K.
We don't take our customers' opinions lightly. So when owners and operators like you weighed in with fresh insights on our reimagined 1050K Dozer, we listened and responded with additional weight and power for more productivity. Other enhancements include an EPA Final Tier 4 (FT4)/EU Stage IV diesel engine for work in nonattainment areas. And a new EcoMode that regulates engine rpm to burn up to 25-percent less fuel. Plus the unsurpassed visibility, operating ease, responsiveness, and reliability you've come to expect from our crawlers. When you compare it to other crawlers in its class, the 1050K is the obvious choice. Stack the deck in your favor - learn more by contacting your John Deere dealer.
FEATURES & SPECS

  • 13.5L Final Tier 4 (FT4)-certified engine
  • Dual-path hydrostatic transmission
  • Eco mode reduces fuel consumption by up to 25%
  • Total Machine Control (TMC)
Net Power 261 kW (350 hp) @ 1,800 rpm
Base Weight 42 800–43 100 kg (94,300–95,000 lb.)
Track on Ground 3419 mm (134.6 in.)
Blade Width 3964 mm (156 in.)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics