get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Voluntown, Connecticut

With extensive construction industry expertise, Our vendors are in a position to advise and assist you in finding the best vendors who offer heavy construction equipment rentals in Voluntown.

Make us your first choice and you will never have to consider other options each time you need heavy machinery and construction tools and supplies.

Whether you have a long term project at hand or just need to rent excavators, dozers, forklifts, wheel loaders, etc. for a short or long timeframe, you will just pay for what you need for a specific timeframe.

Individuals as well as contractors with small or big equipments, for a day, week or months at a stretch, can dial our toll free number any day to get all kinds of construction equipment on hire. We can also be contacted through the contact-form on the right.

Our teams are always on standby to respond to your queries and concerns at all times.

Equipment Rental Voluntown, Construction equipment rental Voluntown, Construction rental Voluntown, Heavy Equipment Rental Voluntown.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Excavators PC88MR-8
PC88MR-8 Hydraulic Excavator

The PC88MR-8 is a link between minis and mid-size excavators. The PC88MR-8 Hydraulic Excavator has a swing boom, tight tail swing, three track options and backfill blade like a mini but is built to have the reliability and durability of larger excavators.

Engine
Model Komatsu SAA4D95LE-5
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, and air-to-air aftercooled
Number of cylinders 4
Piston displacement 199 in³ 3.26 ltr
Horsepower @ 1950 rpm:
Net (ISO 9249/SAE J1349) 65 HP 49 kW
Electric System
Operation voltage 24 V
Battery 55 Ah/2 x 12
Alternator 35 A/24 V
Starter 4.5 kW/24 V
Hydraulic System
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, Closed-center system with load-sensing valves and pressure-compensated valves
Main pumps:
Type Variable displacement, axial piston
Maximum flow 42.3 u.s. gal/min 160 ltr/min
Type Fixed displacement gear
Maximum flow 18.5 U.S. gal/min 70 ltr/min
Hydraulic motors:
Travel 2 x piston motor with parking brake
Swing 1 x piston motor with swing holding brake
Relief valve setting:
Implement, travel circuit 3,840 psi 26.5 MPa / 270 kgf/cm²
Swing and blade circuit 3,060 psi 21.1 MPa 215 kgf/cm²
Performance
Travel speed:
High 3.2 mph 5.1 km/hr
Low 1.8 mph 2.9 km/hr
Swing speed 10 rpm
Ground pressure 5.4 psi 0.38 kg/cm²
Max. drawbar pull 15,050 lbf 66.9 kN / 6820 kgf
Gradeability 35°
Bucket digging force (ISO) 13,780 lb 6250 kg
Arm crowd force (ISO) 8,160 lb 3700 kg
Swing System
Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Automatic, with oil immersed discs
Drives & Brakes
Steering control Two levers with pedalsr
Drive method Fully hydrostatic
Service brake Hydraulic lock
Parking brake Mechanical disc
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed track
Track adjuster Hydraulic
Number of carrier rollers 1 each side
Number of track rollers 5 each side
Refill Capacities
Fuel tank 33.0 u.s. gal 125 ltr
Radiator 2.6 u.s. gal 10 ltr
Engine 2.9 u.s. gal 11 ltr
Final drive, each side 0.3 u.s. gal 1.1 ltr
Swing drive 0.7 U.S. gal 2.8 ltr
Hydraulic tank 14.8 u.s. gal 56 ltr

 

Operating Weight (approximate)
Operating weight including 3405 mm / 11'2" one-piece boom, 2100 mm / 6'11" arm, SAE heaped 0.28 m³ / 0.37 yd³ backhoe bucket, blade, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Operating weight 18,558 lb 8420 kg

Komatsu Excavators PC650LC-8
PC650LC-8 Hydraulic Excavator

The Komatsu Excavators PC650LC-8 has the features you need to achieve your production goals. Three working modes with a lift mode that provides 17% more lifting force, two boom mode settings and Power Max to power through tough material will give your operator the tools he needs to meet your production challenges.

Engine
EPA Tier 3 and EU stage 3A emission certified.
Model Komatsu SAA6D140E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 433 HP 323 kW
ISO9249 / SAE J1349 (Net) 429 HP 320 kW
Hydraulic fan at maximum speed (Net) 386 HP 288 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulics
Type Open-center load-sensing system
Number of selectable working modes 3
Main pump:
Type Variable capacity piston pump
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 2 x 108 U.S. gpm 2 x 410 ltr/min
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 2 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 4,620 psi 31.9 MPa 325 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,700 psi 25.5 MPa 260 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom / 2 7.3" x 67.9" 185 mm x 1725 mm
Arm / 1 7.9" x 80.5" 200 mm x 2045 mm
Bucket / 1 7.3" x 56.1" 185 mm x 1425 mm
or 2.9 m 9.6" Arm / 1 7.3" x 63.4" 185 mm x 1610 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 93,250 lb 415 kN / 42300 kg
Gradeability 70%
Maximum travel speed:
Low 1.9 mph 3.0 km/h
High 3.0 mph 4.9 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 8.3 rpm
Swing torque 154,481 ft. lbs. 21365 kg•m
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 52 each side
No. of carrier rollers 3 each side
No. of track rollers 9 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 232.5 U.S. gal 880 ltr
Radiator 15.3 U.S. gal 58 ltr
Engine 10.6 U.S. gal 40 ltr
Final drive, each side 2.6 U.S. gal 10 ltr
Swing drive 2 x 3.4 U.S. gal 2 x 13 ltr
Hydraulic tank 65.5 U.S. gal 248 ltr
Operating Weight (approximate)
Operating weight, including 7660 mm 25'2" boom, 3500 mm 11'6" arm, SAE heaped 2.7 m3 3.53 yd3 backhoe bucket, operator, lubricant, coolant, full fuel tank, and the standard equipment.
Shoes Operating Weight Ground Pressure
750 mm / 29.5" Triple grouser 64150 kg 141,427 lb 84.3 kPa 0.86 kgf/cm2 12.3 psi
900 mm / 35.5" Triple grouser 65050 kg 143,411 lb 71.1 kPa 0.73 kgf/cm2 10.3 psi

Komatsu Excavators PC800LC-8 MH
PC800LC-8 MH Material Handler (55'-68' Reach)

If your job calls for a grapple, clam or magnet with a long reach, the PC800LC-8 material handler can provide the right arm and boom combinations you'll need.

Engine
EPA Tier 3 and EU stage 3A emission certified.
Model Komatsu SAA6D140E-5
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed control, electronic
Horsepower:
SAE J1995 (Gross) 496 HP 370 kW
ISO9249 / SAE J1349 (Net) 487 HP 363 kW
Hydraulic fan at maximum speed (Net) 454 HP 338 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulics System
Type EOLSS (Electronic Open-center Load Sensing System)
Number of selectable working modes 3
Main pump:
Type Two (2) variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 2 x 130.5 U.S. gal/min 2 x 494 ltr/min
Fan drive pump Variable capacity piston type
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 4,120 psi 28.4 MPa 290 kg/cm²
Heavy lift circuit 4,980 psi 34.3 MPa 350 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: bore x stroke x rod diameter bore x stroke x rod diameter
Boom / 2 8" x 68" x 5" 202 mm x 1727 mm x 127 mm
Arm / 1 (55' front) 9" x 72" x 6" 229 mm x 1829 mm x 152 mm
Arm / 1 (68' front) 8.5" x 72" x 6" 216 mm x 1829 mm x 152 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 125,660 lb 559 kN 57000 kg
Gradeability 70%
Maximum travel speed:
High 2.6 mph 4.2 km/h
Low 1.7 mph 2.8 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 6.8 rpm
Swing torque 209,461 ft. lbs. 28968 kg•m
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 51 each side
No. of carrier rollers 3 each side
No. of track rollers 9 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 258.9 U.S. gal 980 ltr
Radiator 26.4 U.S. gal 100 ltr
Engine 15.3 U.S. gal 58 ltr
Final drive, each side 5.3 U.S. gal 20 ltr
Swing drive 2 x 6.5 U.S. gal 2 x 24.5 ltr
Hydraulic tank 116.2 U.S. gal 440 ltr
Operating Weight (approximate)
Operating weight w/o Grapple: 16.8 m / 87796 kg 55' / 193,555 lb
Operating weight w/o Grapple: 20.7 m / 89339 kg 68' / 196,955 lb

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics