Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment in Chatsworth, Illinois

Our extensive network of construction equipment vendors are ready to meet all your construction equipment rental needs in Chatsworth. Call our toll free number or fill out the form on the right to be contacted by one of our vendors immediately.

Our vendors are dedicated to providing you with the best price and exceptional service. Each vendor shares in our vision to help make your construction project go as smooth as possible.

Peace of Mind: Our Vendors have years of experience in the construction industry.

Equipment Quality: All vendors stock an extensive range of well maintained heavy construction equipmentOur network of equipment rental facilities span hundreds of cities across all 50 states. We can service a small project from a single equipment rental to hundreds of heavy equipment for larger projects.

Equipment Rental Chatsworth, Construction equipment rental Chatsworth, Construction rental Chatsworth, Heavy Equipment Rental Chatsworth.

Unable to parse entered address. API response code: REQUEST_DENIED

New Holland Skid Steer Loader L223

New Holland Skid Steer Loader L223
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL463
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in3 (L) 195 (3.2)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional),mph (km/h) 10.5 (16.9)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised,in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 55°
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 85°
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 24°
Clearance circle without bucket, in(mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2250 (1020)
Tipping load, lbs (kg) 4500 (2045)
Breakout force, lift cylinder, lbs (kN) 5080 (22.6)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 7400 (3350)

New Holland Skid Steer Loader L218

L218_main
THE SUPER BOOM® ADVANTAGEN
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135 (2.2)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 135 (183) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) 10.8 (17.4)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 120 (3048)
Top of ROPS, in (mm) 77.7 (1974)
Bottom of level bucket, fully raised,in (mm) 113.3 (2877)
Overall length without attachment with coupler, in (mm) 105.7 (2697)
Dump angle, degrees 52°
Dump reach (max height), in (mm) 30.8 (783)
Rollback, bucket on ground, degrees 35°
Rollback, bucket at full height, degrees 88°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 23°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 66.1 (1678)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 20.6 (78)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 30.7 (116.2)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1800 (818)
Tipping load, lbs (kg) 3600 (1633)
Breakout force, lift cylinder, lbs (kN) 2620 (11.7)
Breakout force, bucket cylinder, lbs (kN) 5550 (24.7)
Operating weight, lbs (kg) 5930 (2690)

New Holland Skid Steer Loader L230

New Holland Skid Steer Loader L230
THE SUPER® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H413
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in3 (L) 207.5 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 90 (67) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 84 (63) @ 2500 rpm
Peak torque, lb-ft (Nm) 282 (383) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.7 (12.4)
Travel speed, high range (optional),mph (km/h) 11.5 (18.5)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 131.1 (3327)
Top of ROPS, in (mm) 80.4 (2042)
Bottom of level bucket, fully raised,in (mm) 124.2 (3155)
Overall length without attachment with coupler, in (mm) 117.6 (2986)
Dump angle, degrees 55°
Dump reach (max height), in (mm) 30.7 (781)
Rollback, bucket on ground, degrees 33°
Rollback, bucket at full height, degrees 85°
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan),in (mm) 9.5 (243)
Angle of departure, degrees 27°
Clearance circle without bucket, in(mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 76 (1930)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 3000 (1360)
Tipping load, lbs (kg) 6000 (2722)
Breakout force, lift cylinder, lbs (kN) 6350 (28.2)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 8300 (3765)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics