Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Martinsville, Indiana

Looking for a construction equipment supplier in Martinsville? You've landed on the right page. Just dial the toll free number or submit the short contact form on the right to get started.

As soon as you are in touch with us, our construction industry experts start matching your requirements with the best vendor in the area having tools and heavy construction machinery you need on rent.

There is little or no wait time involved before you can start listing out your construction equipment rental needs. We will make sure the vendors get in touch with you on the same day.
So, even if you need machines or construction tools (any number) at the last minute, we will see that you are matched against a vendor who can ensure delivery of machines you need at the jobsite on a priority basis.

Dial our toll free number today. Let us make the arrangements for you. You can also submit a short contact form on the right to get in touch with us.

Equipment Rental Martinsville, Construction equipment rental Martinsville, Construction Martinsville,Heavy Equipment Rental Martinsville.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D61EX-17

D65EX-17 Crawler Dozer

The D65EX-17 provides excellent production and economy at the same time. The Komatsu exclusive Sigma blade can produce 15% more than a conventional semi-U blade and the automatic transmission with lock-up torque converter can reduce fuel consumption by up to 15% over the previous model. To make the operator more comfortable and productive, a new air suspension heavy duty heated seat is standard. Hydrostatic steering (HSS) with a palm command control joystick gives the operator the ability to make smooth turns under full power.

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed (quick shift mode)* Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rd 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
Travel speed (variable mode) 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h

Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.

STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

A large number of construction industry and warehouse management professionals now look at forklift rentals in Fessenden as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Fessenden who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Hiring a Backhoe for your construction or transportation business cannot be a spur of the moment decision since the market is flooded with different makes and models. Backhoes come with different features and different brands use different technologies; the end user may or may not always be familiar with the pros and cons of numerous designs, technologies and features.

Don't fret if your ignorance is mounting the pressure on business performance.

HeavyRentals.Equipment can help you find reliable Backhoe rentals in Clyde. Our nationwide network of Backhoe companies across more than 5,000 locations all across the United States; we can come to your rescue, whether you need to rent Backhoe for a day, week, or months together.

When you hire from us, you needn't worry about the quality and efficiency of the equipment. We offer you access to a massive inventory of ready to be hired Backhoes in Clyde. We have on board vendors having Backhoes of all top brands; we have tied up with a large number of reliable Backhoe rental dealers in Clyde region already. So, you don't have to spend time researching, screening and interviewing vendors.

Before recommending a Backhoe rental company in Clyde, our team will personally assess your business needs and requirements. These requirements will be broken down into weight capacity, lift height, surface available for movement of the Backhoe, turning radius required, and of course your budget. You can narrate your requirements to our support team by dialing our helpline number, and also get free Backhoe rental estimates.

While we are here to make suitable suggestions, we let our clients have full control over their choices in renting Backhoes. When you rent with us be sure the Backhoe have been inspected to US safety standards.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics