get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Dana, Iowa

Small and medium size construction companies in Dana cannot easily afford to own every single piece of heavy machinery or construction supplies but they cannot afford to operate without them either. So, construction equipment rental in Dana is no doubt the best option for such companies.

The service is hassle-free and you can get just about any heavy construction equipment on rent for a fixed period of time. When there are no major projects going on or when the business slows down for some time, you will have the peace of mind because you never invested a big chunk of money for purchasing expensive heavy machinery such as excavators, dozers, forklifts, wheel loaders, loader backhoes, etc.

Finding the right vendors with huge inventories of construction equipment and supplies is now easy through us. You can apprise us of your requirements by dialing the toll free number. You can also submit the quick contact form (on the right) and we will get back to you.

Equipment Rental Dana , Construction equipment rental Dana , Construction Dana , Heavy Equipment Rental Dana

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Trucks 960E-2K

960E-2K Electric Drive Truck

The 960E-2K provides the same features as the 960E-2 electric drive truck, but uses Komatsu Drive with Siemens liquid cooled insulated Gate Bipolar Transistor (IGBT). In addition, Komatsu Drive provides improve torque capacity, a top speed of 40 mph and Hill Start logic which helps reduce rollback in case the truck has to stop while travelling uphill.

Engine
Make and model* Komatsu SSDA18V170
Fuel Diesel
Number of cylinders 18
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 3,500 HP 2610 kW
Net flywheel power*** @ 1900 rpm 3,346 HP 2495 kW
Weight (wet) 25,897 lb 11750 kg
Weight (dry) 24,795 lb 11250 kg
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Drive System*. Komatsu AC Drive
Alternator Siemens
Dual Fan Main Blower:
Alternator Flow 9,380 cfm 266 m3/min
Wheel Motor Flow 14,800 cfm 419 m3/min
Control IGBT AC Torque Control System
Ratio 38.12
Speed (maximum) 40 mph 64.5 km/h
* Drive system performance depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure acceptable application.
Tires and Rims
Rock service, tubeless, radial tires
Standard tire* 56/80 R63
Flange mount rim:
Rim assembly 41'' x 63'' x 5.5'' 1041 mm x 1600 mm x 140 mm
Rims rated at 758 kPa / 110 psi cold inflation pressure.
Typical tire weight 65,154 lb 29553 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Rubber mounts on frame are standard. Eyebrow, body up sling, extended canopy and pivot exhaust heating are optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer		 0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center		 0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer		 0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center		 0.47'' 12 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel		 0.39' 10 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel		 0.24'' 6 mm
Capacity struck 195 yd3 149 m3
SAE heaped 2:1 280 yd3 214 m3
Standard Komatsu body weight 90,000 lb 40823 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab (ISO 3449), adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering column, electric windshield wipers w/washer, tinted glass, power windows, Payload Meter III, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel		 70,000 psi 482.6 mPa
Casting material
tensile strength steel		 90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.77'' 45 mm
Side plate thickness / Rear 0.98'' 25 mm
Side plate thickness / Front 1.26'' 32 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Service brakes: Oil-cooled, hydraulic actuated, multiple disc brakes at each wheel
Traction system Wheel Spin-Slide Control
Max. service apply pressure 2750 psi 18960 kPa
Total friction area per brake 16,078 in2 103729 cm2
Secondary brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on +-15% grade at maximum gross vehicle weight
Electric dynamic retarder 6,196 HP 4620 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.92'' 328 mm
Max. rear stroke 9.40'' 239 mm
Max. rear axle oscillation 6.5°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank.
Radiator frontal area 75.5 ft2 7.02 m2
Service Capacities
Cooling System 190 U.S. gal 719 L
Crankcase 90 U.S. gal 341 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 37 U.S. gal 140 L
Fuel tank 1400 U.S. gal 5300 L
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 105' 32 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 24 sec
Power-down 14 sec
Float-down empty 24 sec
Pumps Two pumps, single package, in-line
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 18960 kPa / 2750 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 20685 kPa / 3,000 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Ports available for powering disabled truck and for system diagnostics.
Electrical System
4 x 8D 1450 CCA, 12 volt, in series/parallel, bumper-mounted with disconnect switch.
Alternator 24 volt, 250 amp
Lighting 24 volt
Cranking motors Two/24 volt
Weight Distribution
Empty vehicle weight:
Front Axle Distribution / 49.5% 272,250 lbs 123490 kg
Rear Axle Distribution / 50.5% 277,750 lbs 125985 kg
Total EVW 550,000 lbs 249475 kg
Gross vehicle weight:
Front Axle Distribution / 33% 419,100 lbs 190104 kg
Rear Axle Distribution / 67% 850,900 lbs 385968 kg
Nominal GVW 1,270,000 lbs 576072 kg
Nominal Payload 720,000 lbs (360 short tons) 326585 kg (327 metric tons )
Nominal payload is defined by Komatsu America Corp's payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application.
The figures above are provided for basic product description purposes.
Please contact your Komatsu distributor for specific application requirements.

Komatsu Trucks HM400-3
HM400-3 Articulated Truck

The 44 ton capacity HM400-3 has a Tier 4 interim Komatsu engine which, combine with other energy saving improvements, can reduce fuel consumption up to 14%. The Komatsu Traction Control System ensures that a loaded HM400-3 will be able to pull through the most severe underfoot conditions. The operator can choose between Economy and Power modes to further tailor his machine performance to the job at hand. Among the cab improvements are a forward facing training seat and separate screen for the rear view camera.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.5" 165 mm
Piston displacement 928 in3 15.24 ltr
Horsepower :
SAE J1995 473 HP 353 kW
ISO 9249 / SAE J1349 469 HP 350 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1669 ft lbs 2263 Nﾕm
231 kgﾕm
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner (cyclonpack type), plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 34.7 mph 55.9 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.727
Planetary 4.941
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 28' 10" 8.8 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 23.8 yd3 18.2 m3
Heaped (2:1, SAE) 31.4 yd3 24 m3
Payload 44.1 U.S. tons 40 metric tons
Material - high tensile strength steel 184,925 psi 30 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 18' 7" x 10' 6" 5667 mm x 3194 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 275 kg/cm2 / 27 Mpa
Hoist time 12.0 sec
Weight (approximate)
Empty weight 74,207 lbs 33,660 kg
Gross vehicle weight 162,569 lbs 73,740 kg
Weight distribution:
Empty:
Front axle 56.4%
Center axle 22.5%
Rear axles 21.1%
Loaded:
Front axle 29.4%
Center axle 35.4%
Rear axles 35.2%
Tires
Standard tire 29.5 R25
Service Refill Capacities
Fuel tank 136.8 U.S. gal 518 L
Engine oil 9.3 U.S. gal 35 L
Torque converter, transmission and retarder cooling 33 U.S. gal 125 L
Differentials (total) 28.5 U.S. gal 108 L
Final drives (total) 8.5 U.S. gal 32 L
Hydraulic system 44.1 U.S. gal 167 L
Suspension (total) 5.7 U.S. gal 21.4 L

Komatsu Trucks HM300-5
HM300-5 Articulated Truck

The 30.9 ton capacity HM300-5 is powered by a Tier 4 final Komatsu engine. A Komatsu Traction Control System along with two working modes and a standard payload meter (PLM) provide the operator with the tools needed to complete the job efficiently and profitably even in the most severe underfoot conditions. A heated, center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor ensure the operator is working productively in comfort throughout a full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 125 mm 4.92"
Stroke 150 mm 5.91"
Piston displacement 11.0 ltr 671 in3
Horsepower :
SAE J1995 248 kW 332 HP
ISO 9249 / SAE J1349 242 kW 324 HP
Rated rpm 2000 rpm
Fan drive type Hydraulic driven
Maximum torque 171 kg-m 1,237 ft lbs
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner, plus dust indicator
*EPA Tier 4 Final emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 58.6 km/h 36.4 mph
Axles
Full time all wheel drive with Komatsu Traction Control System (K-TCS)
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 8.10 m 26'7"
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 13.4 m3 17.5 yd3
Heaped (2:1, SAE) 17.1 m3 22.4 yd3
Payload 28.0 metric tons 30.9 U.S. tons
Material - high tensile strength steel 130 kg/mm2 184,925 psi
Material thickness:
Bottom 14 mm 0.55"
Front 8 mm 0.31"
Sides 12 mm 0.47"
Target area - (inside length x width) 5250 mm x 2685 mm 17'3" x 8'10"
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 300 kg/cm2 / 29.4 Mpa 4264 psi
Hoist time 10.5 sec
Weight (approximate)
Empty weight 25,395 kg 55,986 lbs
Gross vehicle weight 53,475 kg 117,892 lbs
Weight distribution:
Empty:
Front axle 58.9%
Center axle 22.5%
Rear axles 18.6%
Loaded:
Front axle 30.8%
Center axle 36.0%
Rear axles 33.2%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 388 ltr 102.5 U.S. gal
DEF tank 32.8 ltr 8.7 U.S. gal
Engine oil 35 ltr 9.2 U.S. gal
Torque converter, transmission and retarder cooling 80 ltr 21.1 U.S. gal
Differentials (total) 71.5 ltr 18.9 U.S. gal
Final drives (total) 23 ltr 6.1 U.S. gal
Hydraulic system 103 ltr 27.2 U.S. gal
Suspension (total) 10.4 ltr 2.7 U.S. gal

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics