Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Woodville, Massachusetts

Do you need to supplement your core fleet or are in need of a vendor who can provide you with everything from the simplest of construction supplies such as shovels to heaviest of machines such as excavators?

If so, you've just landed on the right page. We represent the biggest network of heavy construction equipment rental service providers in the region and no matter how small, big or varied your requirements for construction equipment in Woodville are, we will comfortably meet them!

We like to exceed the expectations contractors have from us and we've been doing that through our premier services for a long time now!

Pick your phone and call the toll free number right away to get started. No obligations attached! You can also fill out the quick online form on the right and we will get in touch with you for a quick discussion at the earliest.

Equipment Rental Woodville, Construction equipment rental Woodville, Construction Woodville, Heavy Equipment Rental Woodville.

Unable to parse entered address. API response code: REQUEST_DENIED

Multiflow

JCB Light Equipment Multiflow
At the turn of a lever, this clever powerpack has adjustable hydraulic flow so you can tailor its flow rate for different handheld attachments.

  • Briggs and Stratton Vanguard 13.4 kW (18 hp) petrol engine
  • Switch between 20 l/min,30 l/min and 40 l/min flow rate
  • Weight 102 kg
  • Unique suction circuit eliminates pulsation damage to cooler
  • Lift up handle makes portability second to none
  • Power-on-demand system reduces off-load engine to idle for reduced noise levels, less engine wear and low fuel consumption
  • Swing open frame provides excellent maintenance access to engine and hydraulics
  • Integral hose track prevents damage to hoses
  • Adjustable hydraulic flow gives precision control of tools

Komatsu Trucks HM400-3
HM400-3 Articulated Truck

The 44 ton capacity HM400-3 has a Tier 4 interim Komatsu engine which, combine with other energy saving improvements, can reduce fuel consumption up to 14%. The Komatsu Traction Control System ensures that a loaded HM400-3 will be able to pull through the most severe underfoot conditions. The operator can choose between Economy and Power modes to further tailor his machine performance to the job at hand. Among the cab improvements are a forward facing training seat and separate screen for the rear view camera.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.5" 165 mm
Piston displacement 928 in3 15.24 ltr
Horsepower :
SAE J1995 473 HP 353 kW
ISO 9249 / SAE J1349 469 HP 350 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1669 ft lbs 2263 Nユm
231 kgユm
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner (cyclonpack type), plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 34.7 mph 55.9 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.727
Planetary 4.941
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 28' 10" 8.8 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 23.8 yd3 18.2 m3
Heaped (2:1, SAE) 31.4 yd3 24 m3
Payload 44.1 U.S. tons 40 metric tons
Material - high tensile strength steel 184,925 psi 30 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 18' 7" x 10' 6" 5667 mm x 3194 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 275 kg/cm2 / 27 Mpa
Hoist time 12.0 sec
Weight (approximate)
Empty weight 74,207 lbs 33,660 kg
Gross vehicle weight 162,569 lbs 73,740 kg
Weight distribution:
Empty:
Front axle 56.4%
Center axle 22.5%
Rear axles 21.1%
Loaded:
Front axle 29.4%
Center axle 35.4%
Rear axles 35.2%
Tires
Standard tire 29.5 R25
Service Refill Capacities
Fuel tank 136.8 U.S. gal 518 L
Engine oil 9.3 U.S. gal 35 L
Torque converter, transmission and retarder cooling 33 U.S. gal 125 L
Differentials (total) 28.5 U.S. gal 108 L
Final drives (total) 8.5 U.S. gal 32 L
Hydraulic system 44.1 U.S. gal 167 L
Suspension (total) 5.7 U.S. gal 21.4 L

A large number of construction industry and warehouse management professionals now look at forklift rentals in Wells as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Wells who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics