Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Trexlertown, Pennsylvania

Just about any construction project, big or small, requires machines in top-notch condition for smooth and timely completion.

Among all contractors, first time entrepreneurs or well established construction companies, a big chink is now opting for construction equipment rentals for maximizing their profit margins. Finding reliable vendors through reputed platforms like ours is easy and hassle free.

Rental services for the provision of heavy construction equipment in Trexlertown are hassle free and the best part is that there are no ownership costs involved.

Since our vendors serve all of Trexlertown as well as neighboring localities, you can be assured of the fact that there'd always be some convenient locations for you to pick heavy machinery or tools from. Some vendors also provide construction equipment transportation as an add-on.

Dial our toll free number or post the online query (through contact form on the right) to get started today!

Equipment Rental Trexlertown, Construction equipment rental Trexlertown, Construction Trexlertown, Heavy Equipment Rental Trexlertown.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h
4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h
7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h
8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h
13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h
15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h
24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h
24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

John Deere Wheel Loader 644K
Parallel lift that's simply unparalleled.

You don't have to sacrifice powerful digging forces to get parallel lift. The Wheel Loader 644K Powerllel - delivers the best of both, so you can have your loader and forklift, too. Unlike traditional tool-carrier linkages, our innovative design allows load forces to work with, not against, the boom, for big breakout force, even in difficult digging. Impressive torque throughout the entire dump and rollback range enables the 644K to excel at a wide variety of material-handling tasks.

FEATURES & SPECS

  • Final Tier 4 emission-certified engine
  • PowerShiftTM transmission
  • Z-Bar, High-Lift, and PowerllelTM configurations
  • NeverGreaseTM joints
Engine Power 173 kW (232 hp) @ 1,700 rpm
Bucket Capacity 3.2 m³ (4.25 cu. yd.)
Bucket Width 3.04 m (10 ft. 10 in.)
Breakout Force 13 798–15 440 kg (30,419–34,039 lb.)

John Deere Wheel Loader 524K WH(T3)
ThinK. Again.

Although they don't appear all that different from their standard-setting predecessors, the K-Series Loaders are loaded throughout with even more customer-inspired enhancements: spacious, quieter cab with unsurpassed visibility, expanded sealed-switch module, secured key-less start, and easier-to-read LCD monitor with advanced onboard diagnostics.

You have more choices, too, including the 2¾-yard 524K, NeverGreaseTM pins, and automatic diff-lock axles, to list just a few. Exceptional productivity, long-term durability, unparalleled versatility - you get it all in the John Deere K-Series.

ENGINE
Engine Make / Engine Model John Deere / PowerTech E 6068H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 110 (146) @ 2000
Displacement, L (cu in) 6.8 (414)
Net Peak Torque, N-m (lb-ft) 607 (448)
Calculated % Torque Rise 47
ELECTRICAL
Voltage 24
Alternator amps 80
TRANSMISSION
Type Powershift 4WD
Max. Travel Speed - fwd, kph (mph) --
Max. Travel Speed - rev, kph (mph) --
DIFFERENTIAL
Traction Device - Front / Rear Yes / No
FINAL DRIVE
Front Axle Type Inboard planetary
Rear Axle Type Inboard planetary
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Inboard
Service brake actuation Hydraulic, self adjusting
HYDRAULIC SYSTEM
Pump Type Variable Displacement Axial Piston
Pump Flow, L/min (gpm) 165 (44)
System Pressure, kPa (psi) 24994 (3625)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) not published
Bucket Capacity Max., cu m (cu yd) not published
Breakout Force, Std Bucket, kN (lb) 78.74 (17701)
Ride Control --
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 3.1 (4)
Tire Size Standard 20.5-25
TIPPING LOAD
Straight, kg (lb) 10488 (23122)
Full Turn, kg (lb) 9137 (20144)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 3800 (12 ' 6 '')
Dump Clear @ 45 deg, mm (ft in) 2630 (8 ' 7 '')
Reach @ 7', mm (ft in) 1380 (4 ' 6 '')
Reach @ Full Height, mm (ft in) 860 (2 ' 10 '')
Wheelbase, mm (ft in) 2930 (9 ' 7 '')
Clearance Circle, mm (ft in) 11840 (38 ' 10 '')
Overall Length, mm (ft in) 7410 (24 ' 4 '')
Height to Top of Cab, mm (ft in) 3310 (10 ' 10 '')
Ground Clearance, mm (in) 460 (18)
CAPACITIES
Fuel Tank, L (gal) 325 (86)
Hydraulic Reservoir, L (gal) 91 (24)
WEIGHT
SAE Operating Weight, kg (lb) 15371 (33887)
Metric Ton Weight, kg (lb) 15.371 (33.887)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics