Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Rockbridge Baths, Virginia

Our construction equipment rental network in Rockbridge Baths gives you instant access to a huge selection of heavy construction equipment including highly expensive and modern machines, that are otherwise used only by leading companies.

For rental enquiries, you can contact our team at the toll free number. Alternatively, you can submit a message through the contact form on the right. We will get in touch with you as soon as possible.

Why contractors trust our vendors:

  • Well maintained machines
  • The fleet is upgraded on a regular basis; old machines are sold out as used equipment
  • Construction equipment rental agreements are highly flexible
  • The equipment is moved to (and from) the jobsite if required
  • Construction equipment and tools are made available on short notice if the need be
  • There is no restriction on how much you want to rent (it can be just one machine or a full-fledged fleet for a big construction project)

Equipment Rental Rockbridge Baths, Construction equipment rental Rockbridge Baths, Construction Rockbridge Baths, Heavy Equipment Rental Rockbridge Baths.

Unable to parse entered address. API response code: REQUEST_DENIED

JCB Hydraulic Excavators 8008 CTS

8008 CTS

The 1929 lb (875kg) 8008 CTS micro excavator is a compact machine, capable of high performance in the most restricted areas, including within buildings and in rear gardens. In fact it's the most powerful machine of its size on the market. As such, the 8008 CTS micro excavator can dramatically reduce the time and manpower (just one man plus the machine) it takes to carry out labour-intensive digging jobs.

The JCB 8008 CTS hydraulic excavator is small enough to be trailered between sites and has a whole host of attachments for even more versatility.

No wonder our micro excavators are popular with everyone from rental companies to landscapers, redevelopers, grounds care operators and DIY enthusiasts.

Weights
Operating Weight 2094lb (950kg)
Working Perfromance
Maximum Dig Depth 5' 6" (1.69m)
Maximum Dump Height 6' 6" (1.98m)

Komatsu Dozers D39EXi-23
D39EXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
 Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 8.5 km/h / 5.3 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)
5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system 
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:  
Ripper lift   Raise, hold, and lower

JCB Hydraulic Excavators JS260

JS260

The JCB JS260 is the 26 ton model in our heavy tracked excavators range. It's engineered with exceptional strength, productivity, efficiency, comfort, safety and ease of maintenance.

A closed box section revolving frame increases strength and reduces stress. It also makes these excavators highly resistant to impact damage. We've used strong parts too - premium industry standards in fact.

Meanwhile, this 26 ton excavator's engine is a highly efficient Isuzu 188hp (147kW) 4HK unit, compliant with Tier 4i. The benefits of the JS260 series of tracked excavators don't end there either.

Dig Depth
Maximum Digging Depth 23' 8" (7.23m)
Weights
Operating Weight 61,160lb (27750kg)
Engine
Maximum Engine Power 188hp (147kW)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics