Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Cuba City, Wisconsin

Whether you need to complete just one job at hand or are in need of heavy construction equipment rentalsin Cuba City on a regular basis, we have the necessary expertise and inventory to assist you in completing a construction project from start to finish.

Since we have equipment rental locations all over, you need not worry about the transportation costs. Our vendors will either take care of pick-ups and drop-offs or you can move heavy machinery from convenient locations to your jobsite.

Dial our toll free number today; with our vendors, we will help you find the right piece of equipment or heavy machinery for your local job in as little as one day!

You can also contact us by posting an online query through the contact form (on the right). Rest assured - there are no obligations attached until you agree to sign on the dotted line.

Equipment Rental Cuba City, Construction equipment rental Cuba City, Construction Cuba City, Heavy Equipment Rental Cuba City.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Forklift IC Cushion BX50 Series
BX50 Series
Komatsu's heart-of-the-line BX50 series redefines the forklift once again. Whether your application calls for an agile and maneuverable cushion tire model for indoors, or the flexibility and power of a pneumatic model for outdoors, the BX50 series is sure to meet your needs. The BX50's superior performance can increase productivity, minimize operator fatigue, reduce operating costs and improve the working environment. Boost your bottom line now—put a BX50 to work in your application today.

General
GENERAL FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Power Type LPG LPG LPG LPG LPG
Operation Type Sit-Down Sit-Down Sit-Down Sit-Down Sit-Down
Capacity @ 24 in. (600mm) Load Center 4,000 lbs 5,000 lbs 5,000 lbs 6,000 lbs 6,500 lbs
Load Distance From Center Axle (2 Stage) 16.9 in 16.9 in 16.9 in 17.3 in 17.3 in
Wheelbase 55.1 in 55.1 in 55.1 in 57.1 in 57.1 in
Weight
WEIGHT FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Service Weight 7,300 lbs 8,180 lbs 8,180 lbs 9,440 lbs 9,920 lbs
Axle Loading Loaded Front 9,820 lbs 11,330 lbs 11,330 lbs 13,260 lbs 14,000 lbs
Loaded Rear 1,480 lbs 1,850 lbs 1,850 lbs 2,180 lbs 2,430 lbs
Unloaded Front 2,820 lbs 2,600 lbs 2,600 lbs 2,870 lbs 2,740 lbs
Unloaded Rear 4,480 lbs 5,580 lbs 5,580 lbs 6,570 lbs 7,180 lbs
Tires
TIRES FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Tire Type Cushion Cushion Cushion Cushion Cushion
Tire Size Front 21 x 7 x 15 in 21 x 7 x 15 in 21 x 7 x 15 in 21 x 8 x 15 in 21 x 8 x 15 in
Rear 16 .25 x 5 x 11.25 in 16 .25 x 5 x 11.25 in 16 .25 x 5 x 11.25 in 16.25 x 6 x 11.25 in 16.25 x 6 x 11.25 in
Number of Wheels, Front/Rear 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2
Tread Front 34.6 in 34.6 in 34.6 in 35.2 in 35.2 in
Rear 35.4 in 35.4 in 35.4 in 34.7 in 34.8 in
Dimensions
DIMENSIONS FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Tilting Angle, Forward/Backward 6 / 8 deg 6 / 8 deg 6 / 8 deg 6 / 8 deg 6 / 8 deg
Mast Height Lowered 85.5 in 85.5 in 85.5 in 86.5 in 88.6 in
Extended 176 in 176 in 176 in 176 in 176 in
Free Lift Height 5.5 in 5.5 in 5.5 in 5.5 in 5.5 in
Maximum Fork Height 128 in 128 in 128 in 128 in 128 in
Height Overhead Guard 80.9 in 80.9 in 80.9 in 80.9 in 80.9 in
Length, with Standard Forks 132.9 in 135.4 in 135.4 in 137.8 in 139.2 in
Length to Fork Face 90.8 in 93.3 in 93.3 in 95.7 in 97.1 in
Overall Width at Drive Tires 42.1 in 42.1 in 42.1 in 43.3 in 43.3 in
Forks, Thickness x Width x Length 1.6 x 3.9 x 42 in 1.6 x 3.9 x 42 in 1.6 x 4 x 42 in 2 x 4 x 42 in 2 x 4 x 42 in
Carriage Width/ITA Class 37 in / II 37 in / II 37 in / II 37 in / III 37 in / III
Ground Clearance, Under Mast 5.5 in 5.5 in 5.5 in 5.5 in 5.5 in
Ground Clearance, Center of Wheelbase 3.9 n 3.9 n 3.9 n 3.9 n 3.9 n
Right Angle Stacking Aisle 92.5 in 94.5 in 94.5 in 98.8 in 100 in
Turning Radius, Outside 75.6 in 77.6 in 77.6 in 81.5 in 82.7 in
Performance
PERFORMANCE FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Travel Speed, Loaded/Unloaded 10.6 / 10.6 mph 10.6 / 10.6 mph 10.6 / 10.6 mph 10.6 / 10.6 mph 10.6 / 10.6 mph
Lifting Speed, Loaded/Unloaded 120 / 124 fpm 120 / 124 fpm 120 / 124 fpm 104 / 124 fpm 104 / 108 in
Lowering Speed, Loaded/Unloaded 98 / 98 fpm 98 / 98 fpm 98 / 98 fpm 98 / 98 fpm 98 / 98 fpm
Maximum Drawbar Pull, Loaded 4,343 lbs 4,343 lbs 5,513 lbs 5,513 lbs 5,175 in
Maximum Gradeability 36% 30% 39% 31% 28.50%
Service Brake, Operation/Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
Parking Brake, Operation/Control Hand / Mechanic Hand / Mechanic Hand / Mechanic Hand / Mechanic Hand / Mechanic
Steering Type FHPS FHPS FHPS FHPS FHPS
Drive
DRIVE FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Engine Manufacturer / Engine Model GCT / K21 GCT / K21 GCT / K25 GCT / K25 GCT / K25
Rated Output (SAE Net) 56 HP @ 2,700 rpm 56 HP @ 2,700 rpm 60 HP @ 2,700 rpm 60 HP @ 2,700 rpm 60 HP @ 2,700 rpm
Maximum Torque (SAE Net) 119 lb-ft @ 1,600 rpm 119 lb-ft @ 1,600 rpm 142 lb-ft @ 1,600 rpm 142 lb-ft @ 1,600 rpm 142 lb-ft @ 1,600 rpm
# of Cylinders / Displacement 4 / 126 cu in 4 / 126 cu in 4 / 152 cu in 4 / 152 cu in 4 / 152 cu in
Other
OTHER FG20ST-16 FG25ST-16 FG25SHT-16 FG30SHT-16 FG32SHT-16
Relief Pressure, Maximum 2,650 psi 2,650 psi 2,650 psi 2,650 psi 2,650 psi
Transmission Powershift Powershift Powershift Powershift Powershift
Sound Level 82 dB 83 dB 83 dB 83 dB 83 dB

Komatsu Trucks 860E-1K

860E-1K Electric Drive Truck

The 860E-1K utilizes Komatsu Drive with Siemens AC control and liquid cooled Insulated Gate Bipolar Transistor (IGBT) inverter system for the highest available reliability. Hill Start allows the operator to start on a grade without roll back. Traction control assists the operator to power through wet sloppy underfoot condition. Oil cooled multi-disc brakes and retarder give the operator confidence in his control and stopping ability, especially when fully loaded. A front mounted elevating pantagraph can be mounted to allow the Komatsu Trucks 860E-1K to utilize electrified overhead trolley lines.

Engine
Make and model Komatsu SSDA16V160 Tier 2
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower* @ 1900 rpm 2,700 HP 2014 kW
Net flywheel power** @ 1900 rpm 2,550 HP 1902 kW
Weight (wet) 21,182 lb 9608 kg
* Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
**Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Drive System* Komatsu AC Drive
Alternator DRLDZ5010-AL
Dual Fan Main Blower 14,800 cfm 419 m³/min
Control IGBT AC Torque Control System
Ratio 35.52:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor drive system application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, radial tires:
Standard tire* 50/80 R57
Optional tire* 50/90 R57
Flange mount rim 34'' x 57'' x 6'' rim assembly 864 mm x 1448 mm x 152 mm rim assembly
Typical total tire weight 50,780 lb 23033 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Tapered body, body up sling and frame mounted rubber pads are standard. Heated body optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.39' 10 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.31'' 8 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel
0.24'' 6 mm
Capacity struck 160 yd³ 122 m³
SAE heaped 2:1 221 yd³ 169 m³
Standard Komatsu body weight 74,171 lb 33643 kg
Cab
Advanced Operator Environment with isolation mounted, integral 4- post ROPS/FOPS Level 2 structure. Adjustable air suspension seat w/lumbar support, arm rests, and 3-point seat belt, full-size passenger seat, thermal insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.57'' 40 mm
Side plate thickness / Rear 0.75'' 19 mm
Side plate thickness / Front 0.87'' 22 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Max. service apply pressure 2,400 psi 16547 kPa
Total friction area per brake 11,693 in² 75439 cm²
Secondary brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade at maximum gross vehicle weight.
Electric dynamic retarder 4,650 hp 3469 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.32'' 313 mm
Max. rear stroke 11.50'' 292 mm
Max. rear axle oscillation 10.4°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank.
Radiator frontal area 62.5 ft² 5.81 m²
Service Capacities
Cooling System 125 U.S. gal 473 L
Crankcase 74 U.S. gal 280 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 32 U.S. gal 121 L
Inverter cooling system 6.5 U.S. gal 25 L
Fuel 1,200 U.S. gal 4542 L
Reserve Oil® System 30 U.S. gal 114 L
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 102' 31 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 22 sec
Power-down (high idle) 13 sec
Float-down (low idle) 23 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 17237 kPa / 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 18960 kPa / 2,750 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Quick disconnects standard for powering disabled truck and for systems diagnostics.
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24 volt, 140 amp
Lighting 24 volt
Cranking motors Two/24 volt

Hiring a Backhoe for your construction or transportation business cannot be a spur of the moment decision since the market is flooded with different makes and models. Backhoes come with different features and different brands use different technologies; the end user may or may not always be familiar with the pros and cons of numerous designs, technologies and features.

Don't fret if your ignorance is mounting the pressure on business performance.

HeavyRentals.Equipment can help you find reliable Backhoe rentals in Mercury. Our nationwide network of Backhoe companies across more than 5,000 locations all across the United States; we can come to your rescue, whether you need to rent Backhoe for a day, week, or months together.

When you hire from us, you needn't worry about the quality and efficiency of the equipment. We offer you access to a massive inventory of ready to be hired Backhoes in Mercury. We have on board vendors having Backhoes of all top brands; we have tied up with a large number of reliable Backhoe rental dealers in Mercury region already. So, you don't have to spend time researching, screening and interviewing vendors.

Before recommending a Backhoe rental company in Mercury, our team will personally assess your business needs and requirements. These requirements will be broken down into weight capacity, lift height, surface available for movement of the Backhoe, turning radius required, and of course your budget. You can narrate your requirements to our support team by dialing our helpline number, and also get free Backhoe rental estimates.

While we are here to make suitable suggestions, we let our clients have full control over their choices in renting Backhoes. When you rent with us be sure the Backhoe have been inspected to US safety standards.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics