get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Whatley, Alabama

Do you need heavy construction equipment on rent in Whatley ?

Just ring the toll free number, list out your requirements and we will provide you with the best options available for heavy equipment rental.
Its okay if you cannot call right away; you can just fill out the contact form on the right and one of our executives will ring you later to learn about your construction equipment requirements.

We know that pouring out funds for purchasing excavators, lifts and other heavy machinery for some ongoing construction projects in Whatley or elsewhere does not make any sense. After all, you need to keep your credit lines cash flow in shape and needless to mention, maintenance of heavy equipment is in itself a huge challenge.

With us, you can go about executing one construction project after another, without having to worry about the availability of the right machinery or tools.

Equipment Rental Whatley, Construction equipment rental Whatley, Construction rental Whatley, Heavy Equipment Rental Whatley.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D65WX-17 WH

D65WX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h		 2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h		 4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h		 5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h		 8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.
Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Komatsu Excavators PC1250LC-8
PC1250LC-8 Hydraulic Excavator

The PC1250LC-8 is designed to balance the power needed to dig hard dense material like coral while also being able to load out mass quantities of material like topsoil. Power, economy, heavy lift and swing priority work modes allow the operator to operate his machine in the most efficient manner for his current work. Two boom mode settings and shockless boom control make operation smoother and more productive.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1,413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed (Net) 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 130.5 U.S. gpm 2 x 494 ltr/min
For swing 1 x 158.5 U.S. gpm 1 x 600 ltr/min
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders:
Cylinder / Number of cylinders Bore x Stroke Bore x Stroke
Backhoe
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 9.8" x 95.9" 250 mm x 2435 mm
Bucket:
Std / 2 6.3" x 71.8" 160 mm x 1825 mm
SP / 2 6.3" x 76.8" 160 mm x 1950 mm
Swing System
Driven method 2 x Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 686 kN 70000 kg
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes:
Standard, SP, Shovel 48 each side
LC 55 each side
No. of carrier rollers 3 each side
No. of track rollers:
Standard, SP, Shovel 8 each side
LC 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr

Komatsu Excavators PC4000-6
PC4000-6 Mining Shovel

Productivity is the name of the game in the mining business, and the PC4000-6 Mining Shovel excavators is the machine miners turn to when they need to load 150 to 240 ton trucks. The PC4000-6 with 1875 hp can be configured as a shovel or backhoe, depending on the job.

Diesel Drive
The integrated engine oil and filter system combining the oil stabilizing systems, Reserve and Centinel, with Eliminator oil filter extends the oil change interval up to 4000 hours based on oil analysis. The high capacity Mesabi engine radiators are cooled by a hydraulically driven fan for superior cooling efficiency.
Model Komatsu SDA16V160E-2 Tier 2
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged and aftercooled
Number of cylinders 16
Rated power (SAE 1995/J1349) @ 1800 rpm 1,875 HP 1400 kW
Governor All-speed, electronic
Hydraulic System
The power train consists of one main drive. One gearbox drives four identical pumps which draw hydraulic oil from an unpressurized hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritizes hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. The hydraulic system includes large swing-out vertical air-to-oil hydraulic coolers with temperature regulated hydraulically driven fans.
Rated flow (total output) 1,096 U.S. gpm 4140 ltr/min
Relief valve setting 4,495 psi 310 bar
Swing flow rate 420 U.S. gpm 1590 ltr/min
High pressure in line filters one per pump located at the valve blocks 200 microns
Full flow return line filters (5 double) at head of hydraulic tank 10 microns
Case drain return line filters (one double element) 3 microns
Travel and Brake System
Travel control 2 foot pedals
Gradeability Up to 50%
Travel speed (maximum) 1.3 mph 2.1 km/h
Service brake Hydraulic brake
Parking brake Wet multiple-disc brake
Swing System
Hydraulic motors and drives 2
Swing brake, service Hydraulic
Swing brake, parking Wet, multiple disc
Swing ring teeth External
Swing speed (maximum) 4.0 rpm
Undercarriage
The undercarriage consists of one center carbody and two track frames, each side attached by 38 high torque bolts.
Center frame H-type
Track frame Steel box-section
Crawler Assembly
Track adjustment Automatic hydraulic type
Number of track shoes (each side) 49
Number of top rollers (each side) 3
Number of bottom rollers (each side) 7
Electrical System (Diesel Version)
System 24 V
Batteries (series/parallel) 2 x 2 x 12 V
Standard working lights 14 Xenon lights
Standard service lights throughout platform
Electric Drive
Type Squirrel-cage induction motor
Power output 1350 kW
Voltage 6,000 - 7,200 V*
Amperage (approximate) 145 A - 120 A
Start-up Soft start
Frequency standard 60 Hz @ 1800 rpm
Frequency option 50 Hz @ 1500 rpm
*Other voltages available on request.
Automatic Centralized Lubrication
Two hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. The central lube grease system is supplied from a refillable 200 liter 53 gal barrel. A second, identical system supplies open gear lubricant to the swing ring teeth through a lube pinion. Replenishment of the containers is through the Wiggins connections on the service arm.
Service Refill Capacities
Hydraulic oil tank 1,030 U.S. gal 3900 ltr
Hydraulic system 1,559 U.S. gal 5900 ltr
Fuel 1,691 U.S. gal 6400 ltr
Engine coolant 125 U.S. gal 475 ltr
Engine oil 77 U.S. gal 290 ltr
Centinel engine oil make up tank 122 U.S. gal 460 ltr
Operator Cab
The large and comfortable cab is mounted on 18 viscous damping pads and sound insulated. The cab has an automatic climate control and is pressurized. The operator's seat is air suspended, electrically heated and has a lap seat belt and offers multiple adjustments. The trainer seat is also equipped with a lap seat belt. Low-effort joystick controls are electric over hydraulic with foot controls for front shovel clam, crawler and swing brake. Full instrumentation, KOMTRAX Plus and an AM/FM radio with MP3 ready CD player is fitted. The windshield wash wiper has two speeds and intermittent operation. Amenities include a refrigerator and storage cabinets. Powered and heated mirrors are adjusted from inside the cab. External metal sun blinds on the cab side window and internal roller blinds on all windows are standard. The left hand window is an emergency exit. All windows are tinted parsol green.
Cab engineering standards are:
ISO 3449 Falling Objects Protection Structure (FOPS Level II)
ISO 6396 Noise in operator's cab is 75 dB(A)
ISO 2631-1 Whole body vibration and shock below 0.5 m/s²
ISO 5349-1 Hand-lever vibration lower 2.5 m/s²
ISO 10263-4 Heating and air conditioning second heater and air conditioner as option
Vehicle Monitoring System
KOMTRAX Plus is designed for Komatsu mining equipment to provide real time information about the operating status of the machine via a colored display. The integrated digital storage provides a full event history and trend data, which can be downloaded by laptop, optional are W-LAN or satellite modem.
Operating Weights (approximate)
PC4000 Backhoe: Operating weight including 9750 mm / 32'0" boom, 4500 mm / 14'9" stick, 22 m³ / 29.0 yd³ backhoe bucket, operator, lubricant, coolant, 1/3 fuel and standard equipment.
Shoe Width: Operating Weight: Ground Pressure:
47'' / 1200 mm backhoe 869,200 lb / 394 t 31.3 psi / 21.6 N/cm²
59'' / 1500 mm backhoe 879,800 lb / 399 t 25.4 psi / 17.5 N/cm²

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics