Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Northway, Alaska

If you have been on the lookout for a personalized service that caters to all your construction equipment rental needs in Northway, all you have to do is to ring our toll free number or submit the contact form (on the right).

You can kick start your construction project in no time as all necessary equipment, right from jacks, ladders, power tools, etc. to heavy machinery such as backhoes, boom lifts, excavators and high each equipment, would be made available to you by our vendors within days!

Yes, since we do not have a small number of vendors but a huge network, you need not worry whether certain heavy construction equipment would be available in Northway or not.

We taken pride in offering a highly personalized service to contractors in the construction industry; we will not just match with vendors but also advise you on what’s best for your project if the need be.

Equipment Rental Northway, Construction equipment rental Northway, Construction rental Northway, Heavy Equipment Rental Northway.

Toyota Forklifts 7FBCU18

7-Series Electric Motor Forklift-7FBCU18

4-Wheel Cushion

  • 3,000-3,500 lb. Lifting Capacity

Once again, Toyota ingenuity and design have come together to create the revolutionary 7FBCU electric forklift with the AC (Alternating Current) drive system. Yet the AC drive motor isn't the only milestone component driving these products. Toyota's exclusive System of Active StabilityTM (SAS) shares the spotlight. These two industry-leading technologies combine to elevate operator productivity and workplace safety to unprecedented levels. Check out the information below, and don't forget to visit your authorized Toyota Industrial Equipment dealer to get a demonstration!

ERGONOMICS
  • Cowl-mounted hydraulic controls allow for comfortable, "eyes forward" operation
  • Dual operator assist grips combined with the cowl-mounted controls accommodate easy entry/exit from both sides of the truck
  • Low, wide punch plate step on both sides provides sure, comfortable footing
  • Electric shift lever offers fingertip control for fast and easy direction changes
  • Full Hydrostatic Power Steering provides quiet, responsive operation, helping reduce operator fatigue
  • Heavy-duty, non-slip floormat reduces noise and vibration for a smooth, quiet and comfortable ride
EASE OF SERVICE
  • AC drive system is virtually maintenance free to save you time and money
  • Battery slide-out option features aluminum bronze slides and drop-in entry/exit rollers for easier replacement
  • Right side panel allows for easy access to the hydraulic motor, while the left side panel offers access to the controller
  • No-tool floorboard lifts out easily for daily operator checks
  • Self diagnostics, a built-in analyzer and maintenance hour meter combine to make trouble shooting quick and easy
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tipovers
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tipovers
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
PRODUCTIVITY
  • SAS Automatic Fork Leveling Control levels forks with the ground for easier pallet retrieval
  • Wide-view mast allows operators to see the forktips in any position, helping enhance safety and reduce operator fatigue
  • AC drive system, available in 36 or 48 volt configuration, generates quicker acceleration, faster top speeds and higher output than DC motors
  • Power Keep Function allows the 7-Series electric to maintain higher levels of performance and productivity throughout the entire work cycle, even when the battery level is low
  • Automatic shut off saves battery power by turning off the truck after 15 minutes of idle time to extend battery shift life
PROGRAMMABILITY
  • Toyota's new LCD digital monitor provides instant access to virtually every aspect of your forklift's performance and operating system to help you maximize productivity
  • The Power Select function provides four password-protected performance parameters (three preset and one custom) to maximize performance in your application
  • Wide range of digital display functions make it easier to schedule maintenance and perform productivity and other time and motion studies
  • The tuning mode allows the new 7-Series electric to be customized for individual operators in varying applications
SPECIFICATION CHART
Model Load Capacity* (lbs.) Voltage (V) Maximum Travel Speed Full Load Cushion Tire(m.p.h.) Maximum Travel Speed Full Load Pneumatic Tire(f.p.m.) Maximum Gradeability Full Load 3 Min. Rating(%) Basic Right Angle Stack** (in.)
7FBCU18 3,500 36/48 8.7/10.6 61/81 18 82.1

Toyota Forklift 8BRU15

Reach Trucks Forklift-8BRU15 Single Reach

Single and Double

  • 3,000-4,500 lbs. Lifting Capacity

Toyota 8-series Electric Reach Trucks revolutionize the way materials are handled when cube utilization is at a premium. From the versatility of the latest electronic control technology to the comfort and convenience of an ergonomically designed operator compartment, Toyota's 8-series single reach and double reach trucks represent a dramatic approach to reach truck performance and quality.

ERGONOMICS
  • Bubble mat padding absorbs vibration to reduce foot and ankle fatigue.
  • Spacious Operator Compartment with 11" low step height eases frequent entry and exit during the work shift for reduced body fatigue.
  • Cushioned Backrest, Armrest and Floor Mat are designed to limit fatigue and keep operators productive.
  • Polyurethane Drive Tire absorbs shocks caused by uneven floors to allow for smooth traveling.
PERFORMANCE
  • AC Powered System delivers precise speed and torque control loaded or unloaded.
  • AC (36 volt model) Hydraulic Control System provides fully variable lift/lower control for fast, efficient and smooth operation.
  • Multifunction Control Handle allows single-handed control of travel, lift/lower, tilt, reach/retract (including high speed), horn and optional sideshifter for simplified operation.
  • Electronic Power Steering provides quiet, effortless and responsive operation for precise maneuverability.
EASE OF SERVICE
  • Self-Diagnostics help maximize forklift uptime by checking critical functions at start up.
  • Built-In Analyzer provides easy troubleshooting and eliminates the need for an external hand-held analyzer.
  • One-Piece Top Cover with interlocking door provides access to major components to reduce service time for inspection and maintenance.
  • Bolt-On Toe Boxes allow for easy wheel replacement without taking the truck out of service for extended periods of time.
  • Lift-Out Battery Gate and rollers facilitate fast removal and service.
DURABILITY
  • Rugged Single or Double Reach Pantograph with high speed reach and retract increase reliability and performance
  • Dual Articulating Polyurethane Load Wheels offer excellent durability, especially on uneven surfaces, for improved performance.
  • Unitized Frame Design provides optimum rigidity and strength on all 8-Series Reach Trucks.
  • Regenerative Braking improves overall efficiency and prolongs brake component life.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Voltage (V) Baselegs Opening I.D.
(in.)
Battery Compartment Width
(in.)
Maximum Fork
Height
(in.)
Maximum Travel Speed Full Load/No Load (m.p.h.) Maximum Lift Speed Full Load/No Load
(f.p.m.)
Maximum Lower Speed Full Load/No Load (f.p.m.)
8BRU18 Single Reach 3000 36 32 to 50 16.4 or 20.9 FSV to 366 7.3/7.3 65/100 95/90

Toyota Forklifts 8HBE40

Electric Motor Forklift-8HBE40

Walkie/Rider

  • 6,000 - 8,000 lbs. Lifting Capacity

Featuring AC Drive System Technology, Toyota offers a wide range of 24 Volt, electric pallet jacks to meet your productivity needs. Industry leading levels of performance and reliability can be found in all of our walkie pallet, end-control walkie/rider, center control rider and tow tractor units. Attention to operator efficiencies and ease of service put overall equipment value to work for you.

ERGONOMICS
  • Multifunction Control Handle has ergonomically positioned dual thumb wheels with twist grips, lift, lower and horn buttons for simplified operation of all controls with either hand.
  • High-Speed Interlock allows the operator to maintain top travel speed without continuously pressing a button for long distance transport, increasing freedom of movement.
  • Low-platform step height eases frequent entry and exit during floor level order-picking for reduced body fatigue.
  • Polyurethane torsion block casters act as shock absorbers to improve operator ride comfort.
  • Rubber drive tire and polyurethane load wheels provide a smoother ride and longer tire life.
PERFORMANCE
  • AC drive system offers fast response to operating commands, precise power control, compact components and provides high productivity throughout the entire shift.
  • AC drive motor offers excellent acceleration and top travel speed, loaded or unloaded, while improving battery efficiency through regenerative braking.
  • Multifunction control handle is designed for multi-tasking operations while either walking or riding.
  • Regenerative braking improves overall efficiency and prolongs brake component life.
  • Programmable performance parameters may be customized through the digital display to meet a wide range of job applications and operator skill levels.
  • Polyurethane torsion block casters improve cornering under all conditions, optimizing stability and load handling.
  • Lift limit switch stops the hydraulic motor at maximum lift height to reduce unnecessary strain on the lift components and preserve battery life.
  • Hydraulic overload protection valve prevents operators exceeding the unit's rated load handling capacity.
  • Dual lift cylinders provide efficient hydraulic power for smooth, effortless, lifting to reduce component wear.
EASE OF SERVICE
  • AC drive motors have no springs, brushes, commutator or wearable parts thus reducing planned maintenance.
  • One piece, lightweight service access cover conveniently snaps on and off for easy access to major components reducing service time during inspection.
  • Steel reinforced control handle is impact-resistant and easy to service by simply removing four screw.
  • On-board self-diagnostics with built in analyzer simplifies troubleshooting and eliminates the need for an external hand-held analyzer.
  • AC drive system eliminates the need for the directional contactors thus reducing routine maintenance and inspection time.
  • Drive tire replacement is simplified by removing only five bolts to maximize uptime and productivity.
DURABILITY
  • One-Piece, high-strength service cover protects the electrical, hydraulic and mechanical components against damage.
  • Controller Area Network (CAN-bus) communication technology provides precise, fast and reliable control of all truck functions with fewer electrical components.
  • Welded construction with steel gussets strengthens the tractor bumper to help protect critical components against impact, increasing equipment life.
  • Powder coat paint finish provides added durability against paint flaking or chipping upon impact.
  • Box rail fork construction provides torsional rigidity and maximum strength to prevent premature fatigue.
  • Double and triple-length pallet fork trucks contain increased structural load support on the fork tips to accommodate tip-loading applications.
  • Steel bulkhead wrappers protect vital system components and increase product life.
  • Heavy duty bushings and pins add strength and stability for increased component life.
  • Fork Linkage contains Teflon® Coated PolylubeTM Bushings that require no lubrication.
  • Four-point lift linkage system adds strength and rigidity at the piston shaft connecting point for better load stability.
  • Polymer service cover will not bend, dent, fade, or rust and helps protect all internal system components against damage.
  • Solid steel pull rods provide added strength throughout the entire length of the forks.
  • Hall-effect switches eliminate wear components and require no mechanical adjustments resulting in increased component life.
  • Thermal protection and current limiting circuitry protects internal components from damage.
  • Durable aluminum cover helps protect the control handle and vital electronic components.
OPTIONS
Galvanized Chassis Option

  • Available on 7HBW23, 8HBW30 and 8HBE30.40 models
  • Suited for customers who move materials in and out of: cold storage facilities; chemical and salt and brine industries; or in areas where frequent wash down is required to remove contaminants.
Extends the life of the pallet jack with a number of features that have been integrated such as:

  • Heavy duty Teflon® coated PolylubeTM bushings that require no lubrication and add strength and stability.
  • A motor controller splashguard that helps deflect debris and moisture from entering the traction motor controller area.
  • Galvanized metal frames
  • Corrosion resistant stainless steel and nickel-plated linkage pins*
  • Galvanized lower linkages, pull rods and connecting links
  • Steer bearings easily accessible for lubrication
SPECIFICATION CHART
Model Load Capacity**(lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Right Angle Stack 48-inch forks 40-inch wide pallet
8HBE40 8,000 24 6.2 129.3(1)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics