Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Equipment Rental in Bangor, California

When you need machinery and need it real quick to keep your construction project on track,you cannot of course buy heavy construction equipment outright. In such cases,it makes perfect sense to go with a construction equipment rental in Bangor, California

Yes, you can have heavy construction equipment at your disposal,right from dozers and excavators to forklifts and everything else on a job-to-job basis.

There is no capital investment involved and it is possible to get started in as little as a day or two no matter where you are in California. We have a network of construction equipment vendors in Bangor, California and that supply of the smallest and largest of construction equipment.

Getting started is easy. You can dial our toll free number right away and learn more about how this rental service works. You can also fill out the contact form and we will get back to you in no time.

Equipment Rental Bangor, Construction equipment rental Bangor, Construction rental Bangor, Heavy Equipment Bangor.

Engine Powered Scissor Lifts 260MRT

JLG Engine Powered Scissor Lifts 260MRT
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75
  • Platform Capacity: 1250 lb / 566.99 kg
  • Platform Height: 26 ft / 7.92 m

Key Features

  • Narrow 69 in chassis fits into spaces other scissor lifts can't
  • Large work platform and 1,250 lb platform capacity so you can be more productive
  • Standard four wheel drive and 35 percent gradeability keep you going
Power Source
Engine Model Kubota 24.5 hp (Dual Fuel)
Engine Type - Diesel (HRC) Kubota 23.5 hp (Diesel)
Fuel Tank Capacity - Diesel 8 gal. / 28.39 L
General
Brakes Spring Applied, Hydraulically Released
Capacity - Hydraulic Reservoir 15 gal. / 56.78 L
Ground Bearing Pressure 33 psi / 2.31 Kg/cm2
Machine Weight 7360 lb / 3338.44 kg
Performance
Drive Speed - Platform Elevated 0.50 mph / 0.80 km/h
Drive Speed - Platform Lowered 4 mph / 5.63 km/h
Gradeability - 4WD 35 %
Lift Time 27 sec.
Lower Time 21 sec.
Maximum Drive Height 26 ft / 7.92 m
Platform Capacity 1250 lb / 566.99 kg
Platform Capacity - Extension 300 lb / 136.08 kg
Turning Radius - Outside 14 ft 5 in. / 4.39 m
Dimensional Data
Ground Clearance 8 in. / 0.2 m
Machine Height 7 ft 10 in. / 2.37 m
Machine Height - Rails Folded 6 ft 5 in. / 1.96 m
Machine Length 8 ft 3 in. / 2.5 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 5 ft 5 in. / 1.65 m
Platform Dimension B 8 ft 6 in. / 2.59 m
Platform Extension Length 4 ft / 1.22 m
Platform Height 26 ft / 7.92 m
Platform Height - Lowered 4 ft 2 in. / 1.26 m
Platform Railing Height 3 ft 8 in. / 1.1 m
Tire Size 26 x 12 Lug Tread
Wheelbase 6 ft 6 in. / 1.98 m
Reach Specifications
Platform Height 26 ft / 7.92 m
Working Height 32 ft / 9.75 m

John Deere Tractor Loader 210K

Superior grading tractor and much more.
Introducing the latest versions of the highly popular “210". Widely acclaimed as the best industrial-strength loader you can run - grading contractors, paving crews, and landscapers have had our number. But if you think the new K-Series are just great grading machines, you're only scratching the surface of their potential. At 66 kW (88 hp), the 210K Tractor Loader from John Deere brings plenty of ability to a wide variety of tasks. Equip yours with an optional four-season cab, single-lever loader-control with integrated electrohydraulic control for auxiliary (3rd function) loader hydraulics, multipurpose bucket, 41-kW (55 hp) hydromechanical PTO rated at 540 rpm, dual-tilt cylinders for optimal paving & grading productivity in every direction, and limited-slip mechanical-front-wheel-drive axle, and you'll be ready and able for whatever work comes your way. Delivering more pulling power than the 210LJ it replaces, the 210K may be all the tractor loader you need.

With John Deere WorksightTM, JDLinkTM monitoring provides real-time machine utilization and health data, plus location information. Fleet Care proactively suggests maintenance to correct problems early before they turn into costly downtime. And Service ADVISORTM Remote enables your dealer to read diagnostic codes, record performance data, and even update software without a trip to the jobsite. It's the most comprehensive, easy-to-use suite of technology available for increasing uptime and productivity while lowering operating costs. And it's only available from John Deere.

ENGINE
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT073
Net Power, kW (hp) @ Rated rpm 66 (88) @ 2000
Displacement, L (cu in) 4.5 (276)
ELECTRICAL
Volts 12
Alternator amps 120
TRANSMISSION
Type Power Shift
Speed Range - forward 4
Speed Range - reverse 2
Maximum Speed - Forward, kph (mph) 31.2 (19.4)
Maximum Speed - Reverse, kph (mph) 12.9 (8)
BRAKES
Service type Wet Multi Disc
Actuation Hydraulic w/Power Assist
HYDRAULIC SYSTEM
Pump Type Gear
Pump Flow, L/min (gpm) 96 (25.3)
System pressure, kPa (psi) 18961 (2750)
MFWD
Type Power Shift
Axle Oscillation, deg 22
LOADER AND BUCKET
SAE Heaped Capacity, cu m (cu yd) 0.77 (1)
Loader Bucket Width, mm (in) 2184 (86)
Breakout Force, kN (lb) 44.3 (9953)
Lift Capacity to Full Height, kg (lb) 2548 (5612)
Dump Clearance @ 45 deg, mm (ft in) 2670 (8 ft 9 in)
Dump Reach, mm (in) 914 (36)
Bucket Hinge Pin Max Height, mm (ft in) 3340 (11 ft )
Coupler (mechanical, hydraulic) Standard
POWER TAKE OFF,STD/OPT
PTO Optional
Type Mechanical FWD
PTO Rated Speed, rpm 540
DIMENSIONS
Transport Height, mm (ft in) 2540 (8 ft 4 in)
Overall width, mm (ft in) 2130 (7 ft )
Overall Length, mm (ft in) 5230 (17 ft 2 in)
CAPACITIES
Fuel Tank, L (gal) 102.2 (27)
Hydraulic Reservoir, L (gal) 37 (9.8)
WEIGHT
SAE Operating Weight, kg (lb) 4959 (10936)
Metric Ton Weight, kg (lb) 4.959 (10.936)

equipment/komatsu/forklift/ic-pneumatic/cx50-series
CX50 Series IC Pneumatic

The fusion of advanced engine technologies and Komatsu's unique hydraulic system enables the CX50 Series to achieve significant reduction in total operation costs and facilitates superior working performance. A fully electronically controlled engine with a 3-way catalytic system conforms to the latest emission regulations for a cleaner work environment. The CX50 challenges the conventional concept of the forklift.

General
GENERAL FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Power Type LPG LPG LPG LPG
Operation Type Sit-Down Sit-Down Sit-Down Sit-Down
Capacity @ 24 in. (600mm) Load Center 8,000 lbs 9,000 lbs 10,000 lbs 11,000 lbs
Load Distance From Center Axle (2 Stage) 21.3 in 22.8 in 23.2 in 22.6 in
Wheelbase 70.9 in 78.7 in 78.7 in 78.7 in
Weight
WEIGHT FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Service Weight 12,507 lbs 13,673 lbs 14,960 lbs 15,928 lbs
Axle Loading Loaded Front 18,766 lbs 19,547 lbs 21,813 lbs 23,727 lbs
Loaded Rear 2,541 lbs 2,926 lbs 3,047 lbs 3,201 lbs
Unloaded Front 4,873 lbs 5,555 lbs 6,017 lbs 6,270 lbs
Unloaded Rear 7,634 lbs 8,118 lbs 8,943 lbs 9,658 lbs
Tires
TIRES FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Tire Type Pneumatic Pneumatic Pneumatic Pneumatic
Tire Size Front 250 - 15 - 16PR (I) 300 - 15 - 18PR (I) 300 - 15 - 18PR (I) 300 - 15 - 18PR (I)
Rear 7 - 12 - 12PR (I) 7 - 12 - 12PR (I) 7 - 12 - 12PR (I) 7 - 12 - 14PR (I)
Number of Wheels, Front/Rear 2x / 2 2x / 2 2x / 2 2x / 2
Tread Front 43.9 in 45.3 in 45.3 in 45.3 in
Rear 44.1 in 44.1 in 44.1 in 44.1 in
Dimensions
DIMENSIONS FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Tilting Angle, Forward/Backward 6 / 12 deg 6 / 12 deg 6 / 12 deg 6 / 12 deg
Mast Height Lowered 82.7 in 106.7 in 98.4 in 101.8 in
Extended 162.6 in 162.6 in 162.6 in 171.1 in
Free Lift Height 6.1 in 6.3 in 5.7 in 5.7 in
Maximum Fork Height 118.1 in 118.1 in 118.1 in 118.1 in
Height Overhead Guard 87 in 88.6 in 88.6 in 88.6 in
Length, with Standard Forks 158.5 in 166.1 in 168.1 in 173.4 in
Length to Fork Face 116.3 in 124 in 126 in 125.4 in
Overall Width at Drive Tires 53.1 in 57.1 in 57.1 in 57.1 in
Forks, Thickness x Width x Length 2 x 5.9 x 42.1 in 2.2 x 5.9 x 42.1 in 2.2 x 5.9 x 42.1 in 2.2 x 5.9 x 48 in
Carriage Width/ITA Class 46.9 in / III 46.9 in / III 46.9 in / III 50 in / IV
Ground Clearance, Under Mast 5.5 in 5.7 in 5.7 in 5.7 in
Ground Clearance, Center of Wheelbase 6.9 in 8.7 in 8.7 in 8.7 in
Right Angle Stacking Aisle 122.9 in 131.9 in 134.2 in 134.8 in
Turning Radius, Outside 101.6 in 109.1 in 111 in 112.2 in
Performance
PERFORMANCE FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Travel Speed, Loaded - 1st/ 2nd 11.2 / NA mph 11.2 / NA mph 9.6 / 14.3 mph 9.0 / 14.6 mph
Travel Speed, Unloaded - 1st/ 2nd 11.8 / NA mph 11.8 / NA mph 10.3 / 14.9 mph 9.6 / 15.2 mph
Lifting Speed, Loaded/Unloaded 100.4 / 100.4 fpm 100.4 / 100.4 fpm 86.6 / 86.6 fpm 86.6 / 86.6 fpm
Lowering Speed, Loaded/Unloaded 98.4 / 98.4 fpm 98.4 / 98.4 fpm 98.4 / 98.4 fpm 98.4 / 98.4 fpm
Maximum Drawbar Pull, Loaded 5,395 lbs 5,395 lbs 6,295 lbs 6,295 lbs
Maximum Gradeability 28% 25% 26% 25%
Service Brake, Operation/Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
Parking Brake, Operation/Control Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical
Steering Type FHPS FHPS FHPS FHPS
Drive
DRIVE FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Engine Manufacturer / Engine Model GCT EBT-TB45-1A GCT EBT-TB45-1A GCT EBT-TB45-1A GCT EBT-TB45-1A
Rated Output (SAE Net) 83.8 HP @ 2,400 rpm 92.5 HP @ 2,250 rpm 92.5 HP @ 2,250 rpm 92.5 HP @ 2,250 rpm
Maximum Torque (SAE Net) 201 lb-ft @ 1,600 rpm 201 lb-ft @ 1,600 rpm 201 lb-ft @ 1,600 rpm 201 lb-ft @ 1,600 rpm
# of Cylinders / Displacement 6 / 273 cu in 6 / 273 cu in 6 / 273 cu in 6 / 273 cu in
Fuel Tank Capacity 20.1 US Gallons 25.9 US Gallons 25.9 US Gallons 25.9 US Gallons
Other
OTHER FG40ZTU-10 FG40TU-10 FG45TU-10 FG50ATU-10
Relief Pressure, Maximum 2,988 psi 2,988 psi 2,988 psi 2,988 psi
Transmission TORQFLOW TORQFLOW TORQFLOW TORQFLOW

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics