Fill out our form - takes 30 seconds - Enjoy Competing Quotes
Construction Equipment Rental in Naylor, Georgia
We deliver comprehensive heavy construction equipment rental solutions in Naylor, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.
You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!
Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we've got you covered! The inventory of equipment in Naylor is more than enough to meet your requirements.
Equipment Rental Naylor, Construction equipment rental Naylor, Construction Naylor, Heavy Equipment Rental Naylor.
Unable to parse entered address. API response code: REQUEST_DENIED
D275AX-5
The pushing power and production of the D275AX-5 comes from the 452 horsepower its Komastu engine produces and the lock-up torque converter. Other features such as hydrostatic steering and K-bogie system give the D275AX-5 the maneuverability to keep up with fast scraper pushing as well as tough ripping. To make the D275AX-5 even more productive, the unique Sigma dozer blade can be mounted to produce 15% more than a conventional blade.
Engine
Model
Komatsu SAA6D140E-5
Type
4-cycle, water-cooled, direct injection
Aspiration
Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders
6
Bore x stroke
5.51" x 6.50"
140 mm x 165 mm
Piston displacement
930 in³
15.24 ltr
Governor
All-speed, electronic
Horsepower :
SAE J1995 - Gross
452 HP
337 kW
ISO 9249 / SAE J1349 - Net
449 HP
335 kW
Hydraulic fan at maximum speed - Net
410 HP
306 kW
Rated rpm
2000 rpm
Fan drive type
Hydraulic
Lubrication system:
Method
Gear pump, force lubrication
Filter
Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear
Forward
Reverse
1st
2.2 mph / 3.6 km/h
2.9 mph / 4.7 km/h
2nd
4.2 mph / 6.7 km/h
5.4 mph / 8.7 km/h
3rd
7.0 mph / 11.2 km/h
9.3 mph / 14.9 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius
12'10
3.9 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension
Oscillating equalizer bar and pivot shaft
Track roller frame
Cylindrical, high-tensile-strength steel construction
Rollers and idlers
Lubricated track rollers
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted to the roller frame with a series of K-Bogies whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes
Lubricated tracks. Unique seals help prevent entry of foreign abrasive material into pin-to-bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
** Ground pressure based on tractor, cab, ROPS, operator, giant ripper, standard equipment, and shoe and blade shown in the chart.
Coolant and Lubricant Capacity (refill)
Fuel tank
222 U.S. gal
840 ltr
Coolant
26.4 U.S. ga
100 ltr
Engine
13.7 U.S. gal
52.0 ltr
Torque converter, transmission, bevel gear, and steering system
23.8 U.S. gal
90 ltr
Final drive (each side)
10.6 U.S. gal
40 ltr
Operating Weight
Tractor weight - Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
83,070 lb
37680 kg
Operating weight - Including Strengthened Dual tilt SIGMADOZERTM, giant ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
113,600 lb
51530 kg
Ground pressure
17.2 psi
119 kPa / 1.21 kg/cm²
Hydraulic System
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 230 ltr/min / 60.8 U.S. gal/min at rated engine rpm.
Relief valve setting
3,980 psi
27.5 MPa / 280 kg/cm²
Control valves:
Spool control valves for SIGMADOZERTM, Semi-U tilt and Full-U tilt dozer
Positions:
Blade lift
Raise, hold, lower, and float.
Blade tilt
Right, hold, and left.
Note:
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions:
Ripper lift
Raise, hold, and lower.
Ripper tilt
Increase, hold, and decrease.
Hydraulic cylinders
Double-acting, piston.
Hydraulic cylinders/ Number of cylinders:
Bore
Bore
Blade lift / 2
4.72''
120 mm
Blade tilt / 1(Single tilt), 2(Dual tilt)
7.09''
180 mm
Ripper lift / 2
7.09''
180 mm
Ripper tilt / 2
6.30''
160 mm
Hydraulic oil capacity (refill):
SIGMADOZERTM, Semi-U dozer, or U dozer
34.3 U.S. gal
130 ltr
Ripper equipment (additional volume):
Giant ripper
10.0 U.S. gal
38 ltr
Multi-shank ripper
10.0 U.S. gal
38 ltr
If you own a construction company, run a warehouse or have a goods transport business in Utica, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.
But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.
But, finding reliable Excavator rentals in Utica isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Utica.
This is where HeavyRentals.Equipment can help.
Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Utica as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Utica against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.
As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Utica you wish to choose.
If you own a construction company, run a warehouse or have a goods transport business in Hannibal, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.
But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.
But, finding reliable Excavator rentals in Hannibal isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Hannibal.
This is where HeavyRentals.Equipment can help.
Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Hannibal as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Hannibal against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.
As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Hannibal you wish to choose.