get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Savannah, Georgia

We deliver comprehensive heavy construction equipment rental solutions in Savannah, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we've got you covered! The inventory of equipment in Savannah is more than enough to meet your requirements.

Equipment Rental Savannah, Construction equipment rental Savannah, Construction Savannah, Heavy Equipment Rental Savannah.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Wheel Loaders WA320-7
WA320-7 Wheel Loader

The WA320-7 marries a well proven hydrostatic drivetrain with Komatsu's industry leading Tier 4 interim engine technology that reduces fuel economy by up to 10%. The WA320-7 has a parallel lift boom with 10% more lift than the previous model and z-bar linkage for high breakout force for digging.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower:
Gross - SAE J1995 170 HP 127 kW
Net - ISO 9249/SAE J1349 165 HP 123 kW
Rated rpm 2100 rpm
Max power - ISO 14396 @ 1900 rpm 173 HP 129 kW
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Transmission Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed Forward Reverse
1st 0.6 - 8.1 mph 0.6 - 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.6 mph 11.6 mph
4th 23.6 mph 23.6 mph
Measured with 20.5-25 tires
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38.5° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 17'8" 5380 mm
Hydraulic System
Steering system:
Hydraulic pump Gear type pump
Capacity (at rated rpm) 29.1 U.S. gal/min 110 ltr/min
Relief valve setting 2,700 psi 18.6 MPa 190 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.8" x 17.8" 70 mm x 453 mm
Loader control:
Hydraulic pump Gear type pump
Capacity 20.6 U.S. gal/min 78 ltr/min
Relief valve setting 3,000 psi 20.6 MPa 210 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Boom cylinder / 2 5.1" x 28.2" 130 mm x 717 mm
Bucket cylinder / 1 5.9" x 19.3" 150 mm x 491 mm
Control valve 3-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 1.6 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 6.1 U.S. gal 23 ltr
Fuel tank 64.7 U.S. gal 245 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 23.7 U.S. gal 90 ltr
Axle front 7.1 U.S. gal 27 ltr
Axle rear 6.7 U.S. gal 25.5 ltr
Transfer case 1.5 U.S. gal 5.8 ltr

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h		 4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h		 7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h		 8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h		 13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h		 15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h		 24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h		 24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

Komatsu Wheel Loaders WA500-7 Steel Mill
WA500-7 Steel Mill Wheel Loader

The Komatsu-integrated design found in this loader offers class leading value, reliability and versatility. Hydraulics, power train, frame and all other major components are engineered by Komatsu. You get a machine whose components are designed to work together for higher production and reliability. The integrated design also provides the strong frame and component foundation to allow a 2nd or even 3rd life after rebuilding. Now add the Komatsu designed Steel Mill Arrangement with guarding and heat protection specifically matched to the WA500-7 and you have a loader that handles hot slag and stays working longer for increased productivity.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 357 HP 266 kW
ISO 9249/SAE J1349 / Net 353 HP 263 kW
Rated rpm 1900 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-powershift, planetary type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.7 mph
7.5 km/h		 5.3 mph
8.5 km/h
2nd gear 8.0 mph
12.9 km/h		 8.0 mph
12.9 km/h
2nd gear (Lock-up clutch ON) 8.1 mph
13.1 km/h		 8.1 mph
13.0 km/h
3rd gear 13.8 mph
22.2 km/h		 15.3 mph
24.7 km/h
3rd gear (Lock-up clutch ON) 14.7 mph
23.7 km/h		 16.5 mph
26.6 km/h
4th gear 22.1 mph
35.5 km/h		 23.6 mph
38.0 km/h
4th gear (Lock-up clutch ON) 23.2 mph
37.3 km/h		 23.6 mph
38.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 36° (40° to max end stop)
Minimum turning radius at the center of outside tire 23' 2" 7050 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 31.7 U.S. gal/min 120 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.9" x 19.1" 100 mm x 486 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 84.8 U.S gal/min 320 ltr/min
Relief valve setting 4,980 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom cylinder / 2 6.3" x 35.4" 160 mm x 898 mm
Bucket cylinder / 1 7.3" x 26.6" 185 mm x 675 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 7.2 sec
Dump 1.7 sec
Lower (Empty) 4.2 sec
Service Refill Capacities
Cooling system 35.1 U.S. gal 133 ltr
Fuel tank 124.9 U.S. gal 473 ltr
Engine 9.8 U.S. gal 37 ltr
Hydraulic system 89.0 U.S. gal 337 ltr
Axle (each front and rear) 25.1 U.S. gal 95 ltr
Torque converter and transmission 18.8 U.S. gal 71 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics