Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Burley,Idaho

Your search for a super quality, personalized construction equipment rental service in Burleycomes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Burley with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Burley, Construction equipment rental Burley, Construction Burley, Heavy Equipment Rental Burley.

Komatsu Wheel Loaders WA800-3
WA800-3 Wheel Loader

Bucket capacities from 14.4 to 18.3 yd³, large dump clearance and three boom options, standard, high-lift and short, the WA800-3 has the versatility to work in many types of mines and applications. The WA800-3 has the stability to handle all those buckets and high breakout force to work in tough virgin material. The operator can precisely maneuver such a massive machine using the advanced joystick control at his left hand.

Engine
Model Komatsu SAA12V140E-3
Type Water-cooled, 4 cycle
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51'' x 6.50'' 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Governor all-speed, electronic
Flywheel horsepower
SAE J1995 - Gross 853 HP 636 kW
ISO 9249/SAE J1349 - Net 808 PS 603 kW
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Direct injection
Lubrication system
Method Gear pump, force-lubrication
Filter Gear pump, force-lubrication
Air cleaner Dry type with automatic dust ejector and pre-cleaner, cyclopac with vacuator
EPA Tier 2 emissions certified.
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full-powershift, planetary type
Travel Speed*
1st Forward 4.3 mph 7.0 km/h
1st Reverse 4.4 mph 7.1 km/h
2nd Forward 7.6 mph 12.3 km/h
2nd Reverse 7.7 mph 12.4 km/h
3rd Forward 17.4 mph 28.0 km/h
3rd Reverse 17.6 mph 28.3 km/h
*Measured with 45/65-45, 46PR (L-5)
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 22° total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, single reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Dry disc brake
Secondary brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 40° each direction
Minimum turning radius at the center of outside tire 30'2" 9200 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity / at rated rpm 81 U.S. gal/min 307 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 6.3" x 19.8" 160 mm x 503 mm
Loader control:
Hydraulic pump Piston pump
Capacity / at rated rpm 107 U.S. gal/min 405 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder - 2 10.2" x 53.9" 260 mm x 1368 mm
Bucket cylinder - 1 11.8" x 35.7" 300 mm x 906 mm
Control valve spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 11.2 sec
Dump 2.0 sec
Lower (Empty) 4.8 sec
ROPS and Cab
The cab is mounted on viscous damping mounts and is well insulated.
Service Refill Capacities
Cooling system 89.0 U.S. gal 337 ltr
Fuel tank 410.8 U.S. gal 1555 ltr
Engine 34.3 U.S. gal 130 ltr
Hydraulic system 191.5 U.S. gal 725 ltr
Axle (each front and rear) 95.1 U.S. gal 360 ltr
Torque converter and transmission 37.0 U.S. gal 140 ltr

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h
4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h
7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h
8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h
13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h
15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h
24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h
24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

Komatsu Wheel Loaders WA270-7
WA270-7 Wheel Loader

The Komatsu Tier 4 interim technology on the WA270-7 is designed to keep the operator working rather than having to stop and regenerate while saving up to 10% on fuel burned. The hydrostatic drive system on the WA270-7 gives the operator quick and powerful response, self-braking effect of dynamic braking and traction control. A multi-function mono-lever, rearview camera system with separate screen and heated, air ride suspension seat give the operator a comfortable and ergonomic work environment.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower:
Gross - SAE J1995 153 HP 115 kW
Net - ISO 9249/SAE J1349 149 HP 111 kW 149 HP
Rated rpm 2000 rpm
Max power - ISO 14396 @ 1900 rpm 150 HP 112 kW
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Transmission Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed Forward Reverse
1st 0.6 - 8.1 mph 0.6 - 8.1 mph
2nd 8.1 mph 8.1 mph
3rd 11.8 mph 11.8 mph
4th 23.6 mph 23.6 mph
Measured with 20.5-25 tires
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 20° total oscillation
Reduction gear Spiral bevel gear
Differential gear Torque proportioning
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet, multi-disc brake on transfer output shaft.
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 38° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 17' 0" 5175 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump, in common with loader control
Capacity (at rated rpm) 39.6 U.S. gal/min 150 ltr/min
Relief valve setting 3,000 psi 20.6 MPa 210 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 2.76" x 17.8" 70 mm x 453 mm
Loader control:
Hydraulic pump Piston pump, in common with steering system
Capacity (at rated rpm) 39.6 U.S. gal/min 150 ltr/min
Relief valve setting 4,555 psi 320 kg/cm² 31.4 MPa
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke: bore x stroke:
Boom cylinder / 2 4.3" x 28.2" 110 mm x 717 mm
Bucket cylinder / 1 5.5" x 18.9" 140 mm x 480 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.7 sec
Dump 2.0 sec
Lower (Empty) 3.2 sec
Service Refill Capacities
Cooling system 7.4 U.S. gal 28 ltr
Fuel tank 49.1 U.S. gal 186 ltr
Engine 6.7 U.S. gal 23 ltr
Hydraulic system 20.6 U.S. gal 78 ltr
Axle front 4.9 U.S. gal 18.5 ltr
Axle rear 4.8 U.S. gal 18 ltr
Transfer 2.1 U.S. gal 7 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics