Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Danville, Indiana

Looking for a construction equipment supplier in Danville? You’ve landed on the right page. Just dial the toll free number or submit the short contact form on the right to get started.

As soon as you are in touch with us, our construction industry experts start matching your requirements with the best vendor in the area having tools and heavy construction machinery you need on rent.

There is little or no wait time involved before you can start listing out your construction equipment rental needs. We will make sure the vendors get in touch with you on the same day.
So, even if you need machines or construction tools (any number) at the last minute, we will see that you are matched against a vendor who can ensure delivery of machines you need at the jobsite on a priority basis.

Dial our toll free number today. Let us make the arrangements for you. You can also submit a short contact form on the right to get in touch with us.

Equipment Rental Danville, Construction equipment rental Danville, Construction Danville,Heavy Equipment Rental Danville.

Komatsu Dozers D61EXI-23

D61EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-2*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 170 HP 127 kW
(ISO 14396 169 HP 126 kW
ISO 9249 / SAE J1349 - Net 168 HP 125 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph
2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph
3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
Travel speed (variable mode) 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket teeth for easy displacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
HYDROSTATIC TRANSMISSION (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius (as measured by track marks on the ground at pivot turn.) 83"
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 8
Type of shoes (standard) Single grouser
Number of shoes (each side) 46
Grouser height 2.3" 57.5 mm
Shoe width (standard 34" 860 mm
Ground contact area 8,451 in² 54520 cm²
Ground pressure
(with dozer, ROPS canopy):
4.87 psi 33.6 kPa
0.34 kgf/cm²
Track gauge  7'0" 2130 mm
Length of track on ground 10'5" 3161 mm
SERVICE REFILL CAPACITIES
Coolant 11.9 U.S. gal 45 ltr
Fuel tank 98.3 U.S. gal 372 ltr
Engine oil 7.2 U.S. gal 27 ltr
Hydraulic tank 26.7 U.S. gal 101 ltr
Final drive (each side) 2.2 U.S. gal 8.1 ltr
Operating Weight approximate
Tractor weight Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D61EX-23 39,264 lb 17810 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
D61EX-23 39,441 lb 17890 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min / 45 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 280 kg/cm²
27.4MPa
Hydraulic cylinders 3,974
Hydraulic cylinders: Number of cylinders Bore
Blade lift 2 4"
100 mm
Blade tilt 1 5"
120 mm
Blade angle 2 4"
100 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 26.7 U.S. gal 101 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

When selecting a Scissor Lift Rental unit in Richland, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Richland. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Richland. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Richland in no time.

If you own a construction company, run a warehouse or have a goods transport business in Powell Butte, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Powell Butte isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Powell Butte.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Powell Butte as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Powell Butte against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Powell Butte you wish to choose.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics