Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Steamboat Rock, Iowa

Small and medium size construction companies in Steamboat Rock cannot easily afford to own every single piece of heavy machinery or construction supplies but they cannot afford to operate without them either. So, construction equipment rental in Steamboat Rock is no doubt the best option for such companies.

The service is hassle-free and you can get just about any heavy construction equipment on rent for a fixed period of time. When there are no major projects going on or when the business slows down for some time, you will have the peace of mind because you never invested a big chunk of money for purchasing expensive heavy machinery such as excavators, dozers, forklifts, wheel loaders, loader backhoes, etc.

Finding the right vendors with huge inventories of construction equipment and supplies is now easy through us. You can apprise us of your requirements by dialing the toll free number. You can also submit the quick contact form (on the right) and we will get back to you.

Equipment Rental Steamboat Rock , Construction equipment rental Steamboat Rock , Construction Steamboat Rock , Heavy Equipment Rental Steamboat Rock

Komatsu Excavators PC88MR-10
PC88MR-10 Hydraulic Excavator

The PC88MR-10 is a link between minis and mid-size excavators. The PC88MR-10 has a swing boom, tight tail swing, three track options and backfill blade like a mini but is built to have the reliability and durability of larger excavators.

Engine
Model Komatsu SAA4D95LE-5
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, and air-to-air aftercooled
Number of cylinders 4
Piston displacement 199 in³ 3.26 ltr
Horsepower @ 1950 rpm:
Net (ISO 9249/SAE J1349) 65.5 HP 48.8 kW
Electric System
Operation voltage 24 V
Battery 55 Ah / 2x12 V
Alternator 35 A / 24 V
Starter 4.5 kW / 24 V
Hydraulic System
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, Closed-center system with load-sensing valves and pressure-compensated valves
Main pumps:
Type Variable displacement, axial piston
Maximum flow 42.3 U.S gal/min 160 ltr/min
Hydraulic motors:
Travel 2 x piston motor with parking brake
Swing 1 x piston motor with swing holding brake
Relief valve setting:
Implement, travel circuit 3,840 psi 26.5 MPa 270 kgf/cm²
Swing and blade circuit 3,060 psi 21.1 MPa 215 kgf/cm²
Performance
Travel speed:
High 3.2 mph 5.1 km/hr
Low 1.8 mph 2.9 km/hr
Swing speed 10.0 rpm
Ground pressure 5.4 psi 0.38 kg/cm²
Max. drawbar pull 15,050 lbf 66.9 kN / 6820 kgf
Gradeability 35°
Bucket digging force (ISO) 13,780 lb 6250 kg
Arm crowd force (ISO) 8,160 lb 3700 kg
Swing System
Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Automatic, with oil immersed discs
Drives & Brakes
Steering control Two levers with pedalsr
Drive method Fully hydrostatic
Service brake Hydraulic lock
Parking brake Mechanical disc
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed track
Track adjuster Hydraulic
Number of carrier rollers 1 each side
Number of track rollers 5 each side
Refill Capacities
Fuel tank 33.0 u.s. gal 125 ltr
Radiator 2.6 u.s. gal 10 ltr
Engine 2.9 u.s. gal 11 ltr
Final drive, each side 0.3 u.s. gal 1.1 ltr
Swing drive 0.7 U.S. gal 2.85 ltr
Hydraulic tank 14.8 u.s. gal 56 ltr
Operating Weight (approximate)
Operating weight including 3405 mm / 11'2" one-piece boom, 2100 mm / 6'11" arm, SAE heaped 0.28 m³ / 0.37 yd³ backhoe bucket, blade, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Operating weight 18,558 lb 8420 kg

Komatsu Excavators PC2000-8
PC2000-8 Hydraulic Excavator

Komatsu’s “Operator First” design concept is exemplified in the PC2000-8 Hydraulic Excavator. The cab is designed for mining with 30% more cab volume, a full front window with two wipers, OPG level 2 top cab guard, extensive exterior lighting, a 7" LCD color monitor with Eco-gauge and an air suspension seat. The operator can tailor his machine performance using the Economy, Power or Heavy Lift modes for maximizing efficiency.

Engine
Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled
Number of cylinders 12
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 1860 in³ 30.48 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 - Gross 976 HP 728 kW
ISO 9249 / SAE J1349 - Net 956 HP 713 kW
Hydraulic fan at maximum speed 910 HP 679 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulic System
Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable displacement piston pumps
Pumps for Boom, arm, bucket, swing and travel circuits
Maximum flow:
For attachment, swing and travel 612.2 U.S. gpm 2317 ltr/min
For fan drive 85.6 U.S. gpm 324 ltr/min
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Fan 2 x axial piston motors
Relief valve setting:
Attachment circuits:
Backhoe 4,270 psi 29.4 MPa 300 kgf/cm2
Loading shovel 4,270 psi 29.4 MPa 300 kgf/cm2
Travel circuit 4,760 psi 32.9 MPa 335 kgf/cm2
Swing circuit 4,270 psi 29.4 MPa 300 kgf/cm2
Pilot circuit 430 psi 2.9 MPa 30 kgf/cm2
Hydraulic cylinders:
Number of cylinders Bore x Stroke Bore x Stroke
Backhoe:
Boom / 2 11.8" x 104.2" 300 mm x 2647 mm
Arm / 2 9.8" x 84.2" 250 mm x 2138 mm
Bucket 7.9" x 85.4" 200 mm x 2170 mm
Loading shovel:
Boom / 2 11.0" x 76.0" 280 mm x 1930 mm
Arm / 2 7.9" x 85.4" 200 mm x 2170 mm
Bucket / 2 8.9" x 80.7" 225 mm x 2050 mm
Bottom dump / 2 7.1" x 23.6" 180 mm x 600 mm
Swing System
Swing gear 2 x Planetary gear
Swing circle lubrication Grease
Swing holding brakes Mechanical disc brakes
Swing speed 4.8 rpm
Drive System
Travel gear Planetary gear
Gradeability 65%
Maximum travel speed 1.7 mph 2.7 km/h
Parking brakes Mechanical disc brakes
Undercarriage
Track adjuster Grease
No. of shoes 49 each side
No. of carrier rollers 3 each side
No. of track rollers 8 each side
Coolant and Lubricant Capacity (Refilling)
Fuel tank 898.3 U.S. gal 3400 ltr
Radiator 47.6 U.S. gal 180 ltr
Engine 31.7 U.S. gal 120 ltr
Travel gear, each side 22.5 U.S. gal 85 ltr
Swing drive 7.9 x 2 U.S. gal 30 x 2 ltr
Hydraulic tank 343.5 U.S. gal 1300 ltr
PTO 7.9 U.S. gal 30 ltr

Komatsu Excavators PC210LCi-10

PC210LCi-10 Hydraulic Excavator

The Komatsu PC210LCi-10 is the world's first intelligent Machine Control excavator. It features Komatsu's revolutionary machine control and guidance system, fully factory integrated with the other qualities and benefits of the standard Komatsu PC210LC-10 excavator. The exclusive control function lets you focus on moving material efficiently, with no worry about digging too deep or damaging the target surface. From rough digging to finish grading, the PC210LCi-10 excavator drastically improves efficiency and precision on your work sites. Unearth your productivity.

Engine
Model Komatsu SAA6D107E-2*
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower:
SAE J1995 - Gross 123 kW 165 HP
ISO 9249 / SAE J1349 - Net 118 kW 158 HP
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical
Governor All-speed control, electronic
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 475 ltr/min 125.5 U.S. gal/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 295 kgf/cm²/ 28.9 MPa 4,190 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 Bore x Stroke x Rod Diameter 5.1" x 52.5" x 3.5"
Arm / 1 Bore x Stroke x Rod Diameter 5.3" x 58.7" x 3.7"
Bucket / 1 Bore x Stroke x Rod Diameter 4.5" x 44.1" x 3.2"
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 202 kN / 20570 kg 45,349 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 12.4 rpm
Swing torque 6900 kg.m 49,907 ft lbs
Undercarriage
Center frame X-leg frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 9 each side
Coolant and Lubricant Capacity refilling
Fuel tank 400 ltr 105.7 U.S. gal
Coolant 30.7 ltr 8.1 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 5.0 ltr 1.3 U.S. gal
Swing drive 6.5 ltr 1.7 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 234 ltr 61.8 U.S. gal
Operating Weight (APROXIMATE)
Operating weight, including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 1.02 m³ / 1.34 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Triple-Grouser Shoes Ground Pressure: Operating Weight:
28" / 700 mm 23323 kg
51,419 lb
0.43 kg/cm²
6.2 psi
31.5' / 800 mm 23603 kg
52,036 lb
0.38 kg/cm²
5.5 ps

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics