Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Fall River, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Fall River ?

Whether you’ve been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Fall River, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we’ve onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Fall River, Construction equipment rental Fall River, Construction Fall River, Heavy Equipment Rental Fall River.

Toyota Forklift 4FD200

8-Series Internal Combustion Pneumatic Tier Forklift-4FD200

Large Capacity Pneumatic Tire

  • 33,000-51,000 lbs. Lifting Capacity @ 36 inch load center
  • Diesel

Every Toyota forklift undergoes the same world-renowned manufacturing process. Extra steps are always taken to ensure reliability and durability. Rest assured, these models are built to withstand the most demanding applications.

ERGONOMICS
  • Hydraulic seat-side pilot-type short-throw levers
  • Left-hand shift lever
  • Tilt steering column
  • Long operator assisted grips
  • Non-slip rubber floor mat
PeRFORMANCE
  • EPA/CARB certified diesel engine
  • Hino 7.68 liter, 6 cylinder diesel engine (J08E-UM)
    • Common-rail electronic fuel injection system
    • Turbocharged and intercooled
    • Water cooled EGR valve
    • Quick-glow system
  • UL-D Conformity
  • 24 volt electrical system
  • Automatic 2 speed transmission with a 2 stator torque converter (2 FWD / 1 REV)
  • 2-function hydraulic control valve (lift and tilt)
  • Independent brake & inching pedals
  • Full hydraulic power steering with synchronized steering
  • Electric parking brake
  • Warning buzzer for parking brake (Release)
  • Upswept exhaust
  • Vinyl multifunction deluxe seat with armrests
  • Integrated monitoring system - includes
    • Hour meter display
    • Fuel gauge
    • Low fuel warning light
    • Engine coolant level warning light
    • Engine pressure warning light
    • Clogged air cleaner warning light
    • Battery charge warning light
    • Torque converter oil temperature warning light
    • Check engine light
    • Pre-heat indicator light
    • Sedimenter warning light
    • Brake warning light
    • SAS warning light (synchronized steering)
    • Engine water temperature indicator
    • Speedometer
    • Brake air pressure gauge
EASE OF SERVICE
  • Engine monitoring system
  • Centralized grease lubrication (mast, rear axle)
  • All wheel rotatable tires
SAFETY
  • Operator Presence Sensing System (OPSS)
  • Air horn
  • Asbestos free components
  • Neutral safety switch
  • Engine key stop
  • Overhead guard
  • ORS seat
DURABILITY
  • Wet disc brakes with dedicated oil cooling system
  • Air brakes with air dryer
  • AxleTech planetary drive axle
  • AxleTech planetary drive axle
  • Engine protection system
  • High cooling capacity radiator with fan shroud
  • Large capacity engine cooling fan
  • Fully oil charged lift cylinders
  • Pin type forks
  • Low maintenance battery
  • Cyclone air cleaner
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.) Turning Radius (in.) Overall Truck Dimensions (in.)
Length Width Height
4FD200 44,000 168/2300 9.9 67.9 24 234.1 196.9 211.4 119.7 140.9

Toyota Forklifts 8FBCU25

8-Series Electric Motor Forklift-8FBCU25

4-Wheel Cushion

  • 4,000-6,500 lb. Lifting Capacity

Once again, Toyota ingenuity and design have come together to create the revolutionary 8-Series 4-wheel electric forklift with the AC (Alternating Current) drive system. Yet the AC drive motor isn't the only milestone component driving these products. Toyota's exclusive System of Active StabilityTM (SAS) shares the spotlight. These two industry-leading technologies combine to elevate operator productivity and workplace safety to unprecedented levels. Check out some of the features below to learn more about these great trucks, and don't forget to visit your authorized Toyota Industrial Equipment dealer to get a demonstration!

ERGONOMICS
  • Curvilinear overhead guard legs provide a wider opening for operator entry/exit.
  • Electric shift lever offers easily accessible fingertip control for fast and easy directional changes.
  • Automotive style light switch and turn signal levers are integrated into the slim profile steer column for easy accessibility and simple operation.
  • 12-inch-long dual operator assist grips have been designed to meet the needs of varying operator sizes and are in line with the overhead guard pillars for improved operator peripheral vision.
  • Low profile front cowl results in enhanced forward visibility and lessens back strain by reducing the need for the operator to lean forward to view load and fork tips.
  • Foot-activated parking brake further lessens operator back strain by reducing the need to lean forward to activate and disengage parking brake. Foot brake location also eliminates clutter from cowl area, enhancing forward visibility.
  • Overly spacious legroom provides unsurpassed comfort levels throughout the operator's work shift.
  • Heavy-duty, non-slip floor mat adds to this comfort by minimizing noise, heat and vibration.
  • EZ Pedal option allows operators to quickly and easily change travel direction without removing a hand from the steering wheel or hydraulic controls.
  • Mini-lever or joystick hydraulic controls with Ergo-Shift feature a three-way adjustable armrest to enhance operator comfort and productivity.
  • High mount key switch and parking brake release lever have been strategically placed to minimize the need for an operator to lean forward in the seat.
  • Cowl-mounted hydraulic levers are ergonomically situated for improved operator comfort and unobstructed entry/exit from the right side of the truck.
EASE OF SERVICE
  • AC Motors have no brushes, springs, commutator or wearable parts to service and replace, resulting in fewer, quicker and less expensive maintenance needs.
  • On-demand, full hydrostatic power steering is controlled through the AC hydraulic motor system, eliminating an additional motor to service.
  • No-tool floorboard lifts out in seconds for fast, easy access during daily operator checks.
  • Fault code memory with hour meter reading displays forklift history to simplify troubleshooting.
  • Battery roll- and slide-out options with redesigned battery retaining system are available for easy battery replacement.
  • Curved front fenders with redesigned tie-down hooks offer improved security while shipping the unit.
  • Analyzer Mode displays the status of the electrical system and allows instantaneous access to information on errors detected by the controller.
  • Self-diagnostics with built-in analyzer capabilities are offered through the optional multifunction digital display, eliminating the need for a hand-held analyzer.
  • Planned maintenance hour meter notifies operators of the need for routine maintenance and service via the digital display monitor. The service intervals are programmable.
  • Right-side panel provides reliable protection and easy service access to the hydraulic motor.
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tipovers
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tipovers
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
PRODUCTIVITY
  • AC powered system offers fast response to operating commands, precise power control, compact components and higher levels of productivity throughout the entire work shift.
  • AC drive motor offers quicker acceleration, higher top speeds and smoother direction changes to help operators move more pallets per hour.
  • AC lift motor features fully variable lift/lower control for fast, precise pallet retrieval or positioning.
  • On-demand, full hydrostatic power steering offers low-effort control while providing precise maneuverability and load handling in confined work areas.
  • Programmable performance parameters may be customized through the digital display to adjust to a variety of job applications and operator skill levels.
  • Momentary hold and controlled descent feature maximizes forklift control when the accelerator pedal is released on a grade by regulating rolling speed.
  • Touch-pad, keyless entry system with password protection option allows only designated personnel to operate the equipment.
  • Tuning mode is used to make fine adjustments in the traveling and material handling features in order to customize the performance parameters for individual operators and varying applications.
  • Power keep function allows the 8-Series' AC motors continue to perform at productive levels even when the battery charge is low.
PROGRAMMABILITY
  • Multifunction digital display with illuminated icons informs the operator of vital operating information for maximum uptime.
  • Performance parameters may be customized through the digital display to adjust to a variety of job applications and operator skill levels.
  • Pre-set performance parameters (S.P.H.) are available for simpler truck performance customization.
  • Multifunction hour meters allow for planned maintenance scheduling and the ability to perform time and motion studies.
  • Programmable battery discharge indicator enables customization of the truck's battery discharge settings to closer match the battery's discharge rate, helping to maintain proper battery life.
  • Battery discharge indicator with lift interrupt prolongs battery life.
  • Auto-Off System is seat-activated and programmable to conserve battery power.
  • Power select indicator displays the mode currently in operation by highlighting either S (savings), P (performance) or H (high performance).
  • Auto height select option allows operators to program the forklift to automatically stop the forks at pre-determined rack heights to maximize productivity.
OPTIONS
Compact Battery Compartment Option

  • Available on 4-Wheel AC electric 4,000 and 5,000 lb. models.
  • Suited for customers that have narrow aisles.
  • Benefits customers that demand shorter, more compact forklifts to increase their productivity.
  • Warehouse and Distribution Centers, Food Distribution and Food Manufacturing are industries that will benefit from this option.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Voltage (V) Maximum Travel Speed Full Load Cushion Tire(m.p.h.) Maximum Travel Speed Full Load Pneumatic Tire(f.p.m.) Maximum Gradeability Full Load 3 Min. Rating(%) Basic Right Angle Stack** (in.)
8FBCU25 5,000 36/48 9.6/11.5 59/79 21 87.6

Toyota Forklift 8BNCU18 16.5

8-Series Electric Motor Forklift-8BNCU18-16.5

Stand Up Rider Truck

  • 3,000-4,000 lb. Lifting Capacity

Toyota's 8-Series Stand-Up Rider was built with the ultimate performance and comfort in mind, delivering improved ergonomics, reliability and durability while reducing service intervals.

ERGONOMICS
  • Spacious operator compartment with 8" low step height eases frequent entry and exit during the work shift for reduced body fatigue.
  • Backrest, armrest and floor mat offer cushioned lean points to reduce the effects of vibration and standing stresses.
  • Integrated clipboard, amenity tray and cup holder provide a convenient, easy-to-reach, mobile workstation.
  • Universal low-effort brake pedal allows for flexible positions to increase operator productivity while maneuvering in either direction.
  • Shock dampened isolated operator floor with 7/8" thick, cushioned operator floor mat offers shock tempering that reduces operator fatigue.
  • Single-axis multifunction control handle allows control of travel, lift/lower, tilt and two optional auxiliary functions.
  • Extended operator backrest option offers additional 10" of comfort for tall operators.
PERFORMANCE
  • AC powered system offers fast response to operating commands, precise power control, compact components and higher levels of productivity throughout the entire work shift.
  • AC drive motor offers quicker acceleration, higher top speeds and smoother direction changes to help operators move more pallets per hour.
  • AC lift motor features fully variable lift/lower control for fast, precise pallet retrieval or positioning.
  • Auto-position hold maintains the forklift's position on an inclined surface for maximum control.
  • Optional integral sideshifter minimizes truck movements for storing and retrieving loads to increase overall operator efficiency.
  • Anti-stall protection cuts off power to the forklift to prevent the motor from overheating.
  • Cornering speed control option automatically slows the forklift's travel speed while turning to help prevent damage to loads and tipovers.
  • Mast tilt centering conveniently levels the forks parallel to the ground from both the back tilt and front tilt positions, improving operator efficiency and productivity.
DURABILITY
  • Regenerative braking improves overall efficiency and prolongs brake component life.
  • Moisture-resistant electrical connections are less susceptible to water intrusion and corrosion.
  • Controller Area Network (CAN-bus) communication technology provides precise, fast and reliable control of all truck functions with fewer electrical components.
  • Large diameter drive tires enable the truck to withstand continuous impact between dock plates and trailers.
  • Powder-coat paint finish provides added durability against paint flaking or chipping on impact.
  • LED lights option offer less maintenance and longer life.
  • Dual steer tires reduce loading by 30% for extended tire life.
  • Rugged chassis and mast designed to exceed the demands of your toughest workplace.
SERVICEABILITY
  • AC Motors have no brushes, springs, commutator or wearable parts to service and replace, resulting in fewer, quicker and less expensive maintenance needs.
  • Planned maintenance service intervals of 500 hours doubles the time between service visits.
  • Self-diagnostics help maximize uptime by checking critical functions at start up.
  • Built-in analyzer simplifies troubleshooting and eliminates the need for an external hand-held analyzer.
  • No directional contactors reduce periodic maintenance and inspection time.
  • Self-adjusting electric disc brake reduces costly downtime by eliminating routine maintenance.
  • Battery connection location offers the operator easier access to the connector and keeps the battery cables confined to the compartment.
  • Periodic maintenance notifies operators of the need for routine maintenance and service via the digital display monitor. The service intervals are programmable.
SPECIFICATION CHART
Model Load Capacity (lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack* (in.)
8BNCU18/16.5 3,500 36 7.5 65 15 68.8

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics