Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Calvin, Louisiana

The days when only large scale companies could execute construction projects are long gone now. Today, the availability of heavy construction equipment rentals in Calvin and elsewhere have ensured that small companies do not have to depend on the availability of necessary capital to buy expensive machinery such as forklifts, concrete material handling equipment, dozers, excavators, etc.

But, finding the right vendor without having to spend several days short-listing and interviewing potential construction equipment suppliers is nothing short of a challenge for new players in the industry. This is where we can help.

We have a huge network of companies having inventories of all types of ready-to-rent construction equipment in Calvin.

Getting access to this network of some of the most reputed suppliers is easy. Dial our toll free number today or fill out the short contact form on the right.

The vendors will contact you within hours.

Equipment Rental Calvin, Construction equipment rental Calvin, Construction Calvin, Heavy Equipment Rental Calvin.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Komatsu Trucks HM300-3
HM300-3 Articulated Truck

An operator who likes cycle quickly through any ground conditions and do it in comfort will love the HM300-3. Komatsu Traction Control System coupled to the power of the Tier 4 interim Komatsu engine and two working modes give the operator the tools they'll need and to complete their job efficiently and profitably. A center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor Provide the operator what he needs to operate productively in comfort for his full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 4.92" 125 mm
Stroke 5.91" 150 mm
Piston displacement 674 in3 11.04 ltr
Horsepower :
SAE J1995 332 HP 248 kW
ISO 9249 / SAE J1349 324 HP 242 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1239 ft lbs 1680 N 71 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 36.4 mph 58.6 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Minimum turning radius, wall to wall 26'7" 8.10 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 17.5 yd3 13.4 m3
Heaped (2:1, SAE) 22.4 yd3 17.1 m3
Payload 30.9 U.S. tons 28.0 metric tons
Material - high tensile strength steel 184,925 psi 130 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 17'3" x 8'10" 5250 mm x 2685 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 300 kg/cm2 / 29.4 Mpa
Hoist time 10.5 sec
Weight (approximate)
Empty weight 54,917 lbs 24,910 kg
Gross vehicle weight 116,823 lbs 52,990 kg
Weight distribution:
Empty:
Front axle 57.0%
Center axle 23.0%
Rear axles 20.0%
Loaded:
Front axle 29.0%
Center axle 36.5%
Rear axles 34.5%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 102.6 U.S. gal 388.3 L
Engine oil 9.2 U.S. gal 35 L
Torque converter, transmission and retarder cooling 25.9 U.S. gal 98 L
Differentials (total) 18.9 U.S. gal 71.5 L
Final drives (total) 6.1 U.S. gal 23 L
Hydraulic system 27.2 U.S. gal 103 L
Suspension (total) 2.7 U.S. gal 10.4 L

Toyota Forklift 4FD150

8-Series Internal Combustion Pneumatic Tier Forklift-4FD150

Large Capacity Pneumatic Tire

  • 33,000-51,000 lbs. Lifting Capacity @ 36 inch load center
  • Diesel

Every Toyota forklift undergoes the same world-renowned manufacturing process. Extra steps are always taken to ensure reliability and durability. Rest assured, these models are built to withstand the most demanding applications.

ERGONOMICS
  • Hydraulic seat-side pilot-type short-throw levers
  • Left-hand shift lever
  • Tilt steering column
  • Long operator assisted grips
  • Non-slip rubber floor mat
PARFORMANCE
  • EPA/CARB certified diesel engine
  • Hino 7.68 liter, 6 cylinder diesel engine (J08E-UM)
    • Common-rail electronic fuel injection system
    • Turbocharged and intercooled
    • Water cooled EGR valve
    • Quick-glow system
  • UL-D Conformity
  • 24 volt electrical system
  • Automatic 2 speed transmission with a 2 stator torque converter (2 FWD / 1 REV)
  • 2-function hydraulic control valve (lift and tilt)
  • Independent brake & inching pedals
  • Full hydraulic power steering with synchronized steering
  • Electric parking brake
  • Warning buzzer for parking brake (Release)
  • Upswept exhaust
  • Vinyl multifunction deluxe seat with armrests
  • Integrated monitoring system - includes
    • Hour meter display
    • Fuel gauge
    • Low fuel warning light
    • Engine coolant level warning light
    • Engine pressure warning light
    • Clogged air cleaner warning light
    • Battery charge warning light
    • Torque converter oil temperature warning light
    • Check engine light
    • Pre-heat indicator light
    • Sedimenter warning light
    • Brake warning light
    • SAS warning light (synchronized steering)
    • Engine water temperature indicator
    • Speedometer
    • Brake air pressure gauge
EASE OF SERVICE
  • Engine monitoring system
  • Centralized grease lubrication (mast, rear axle)
  • All wheel rotatable tires
SAFETY
  • Operator Presence Sensing System (OPSS)
  • Air horn
  • Asbestos free components
  • Neutral safety switch
  • Engine key stop
  • Overhead guard
  • ORS seat
DURABILITY
  • Wet disc brakes with dedicated oil cooling system
  • Air brakes with air dryer
  • AxleTech planetary drive axle
  • AxleTech planetary drive axle
  • Engine protection system
  • High cooling capacity radiator with fan shroud
  • Large capacity engine cooling fan
  • Fully oil charged lift cylinders
  • Pin type forks
  • Low maintenance battery
  • Cyclone air cleaner
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.) Turning Radius (in.) Overall Truck Dimensions (in.)
Length Width Height
4FD150 33,000 168/2300 9.3 80.7 39 211.8 194.9 207.3 115.6 129.5

Toyota Forklifts 8HBW30

Electric Motor Forklift-8HBW30

6,000 lb Capacity

  • 6,000 lbs. Lifting Capacity

Featuring AC Drive System Technology, Toyota offers a wide range of 24 Volt, electric pallet jacks to meet your productivity needs. Industry leading levels of performance and reliability can be found in all of our walkie pallet, end-control walkie/rider, center control rider and tow tractor units. Attention to operator efficiencies and ease of service put overall equipment value to work for you.

ERGONOMICS
  • Multifunction Control Handle comes equipped with large dual thumb wheels, lift, lower and horn buttons for simplified operation of all controls with either hand.
  • Hand Grips are designed at an angle to fit the operator's natural hand position comfortably, helping to reduce fatigue and increase operator efficiency.
  • Directional Thumb Wheels are designed to enhance comfort by minimizing hand and wrist fatigue.
PERFORMANCE
  • AC drive system offers fast response to operating commands, precise power control, compact components and facilitates high productivity throughout the entire shift.
  • AC drive motor offers excellent acceleration and top travel speed, loaded or unloaded, while improving battery efficiency through regenerative braking.
  • Regenerative braking improves overall efficiency and prolongs brake component life.
  • Programmable performance parameters may be customized through the digital display to meet a wide range of job applications and operator skill levels.
  • Lift limit switch stops the hydraulic motor at maximum lift height to reduce unnecessary strain on the lift components and preserve battery life.
  • Hydraulic overload protection valve prevents operators exceeding the unit's rated load handling capacity.
  • Dual lift cylinders provide efficient hydraulic power for smooth, effortless, lifting to reduce component wear.
EASE OF SERVICE
  • AC drive motors have no springs, brushes, commutator or wearable parts thus reducing planned maintenance.
  • One piece, lightweight service access cover conveniently snaps on and off for easy access to major components reducing service time during inspection.
  • On-board self-diagnostics with built in analyzer simplifies troubleshooting and eliminates the need for an external hand-held analyzer.
  • AC drive system eliminates the need for the directional contactors thus reducing routine maintenance and inspection time.
  • Drive tire replacement is simplified by removing only five bolts to maximize uptime and productivity.
DURABILITY
  • One-Piece, high-strength service cover protects the electrical, hydraulic and mechanical components against damage.
  • Controller Area Network (CAN-bus) communication technology provides precise, fast and reliable control of all truck functions with fewer electrical components.
  • Welded construction with steel gussets strengthens the tractor bumper to help protect critical components against impact, increasing equipment life.
  • Powder coat paint finish provides added durability against paint flaking or chipping upon impact.
  • Box rail fork construction provides torsional rigidity and maximum strength to prevent premature fatigue.
  • Steel bulkhead wrappers protect vital system components and increase product life.
  • Heavy duty bushings and pins add strength and stability for increased component life.
  • Fork Linkage contains Teflon® Coated PolylubeTM Bushings that require no lubrication.
  • Four-point lift linkage system adds strength and rigidity at the piston shaft connecting point for better load stability.
  • Polymer service cover will not bend, dent, fade, or rust and helps protect all internal system components against damage.
  • Solid steel pull rods provide added strength throughout the entire length of the forks.
  • Hall-effect switches eliminate wear components and require no mechanical adjustments resulting in increased component life.
  • Thermal protection and current limiting circuitry protects internal components from damage.
OPTIONS
Galvanized Chassis Option

  • Available on 7HBW23, 8HBW30 and 8HBE30.40 models
  • Suited for customers who move materials in and out of: cold storage facilities; chemical and salt and brine industries; or in areas where frequent wash down is required to remove contaminants.
Extends the life of the pallet jack with a number of features that have been integrated such as:

  • Heavy duty Teflon® coated PolylubeTM bushings that require no lubrication and add strength and stability.
  • A motor controller splashguard that helps deflect debris and moisture from entering the traction motor controller area.
  • Galvanized metal frames
  • Corrosion resistant stainless steel and nickel-plated linkage pins*
  • Galvanized lower linkages, pull rods and connecting links
  • Steer bearings easily accessible for lubrication
SPECIFICATION CHART
Model Load Capacity**(lbs.) Voltage (V) Maximum Travel Speed Full Load (m.p.h.) Right Angle Stack 48-inch forks 40-inch wide pallet
8HBW30 6,000 24 3.7 81.2

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics