Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Fort Kent Mills,Maine

In the construction industry, one of the best ways to free up your company’s capital is to opt for a rental model for heavy construction equipment in Fort Kent Mills. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in Fort Kent Mills, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental Fort Kent Mills, Construction equipment rental Fort Kent Mills, Construction Fort Kent Mills, Heavy Equipment Rental Fort Kent Mills.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Trucks HM300-3
HM300-3 Articulated Truck

An operator who likes cycle quickly through any ground conditions and do it in comfort will love the HM300-3. Komatsu Traction Control System coupled to the power of the Tier 4 interim Komatsu engine and two working modes give the operator the tools they'll need and to complete their job efficiently and profitably. A center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor Provide the operator what he needs to operate productively in comfort for his full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 4.92" 125 mm
Stroke 5.91" 150 mm
Piston displacement 674 in3 11.04 ltr
Horsepower :
SAE J1995 332 HP 248 kW
ISO 9249 / SAE J1349 324 HP 242 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1239 ft lbs 1680 N 71 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 36.4 mph 58.6 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Minimum turning radius, wall to wall 26'7" 8.10 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 17.5 yd3 13.4 m3
Heaped (2:1, SAE) 22.4 yd3 17.1 m3
Payload 30.9 U.S. tons 28.0 metric tons
Material - high tensile strength steel 184,925 psi 130 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 17'3" x 8'10" 5250 mm x 2685 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 300 kg/cm2 / 29.4 Mpa
Hoist time 10.5 sec
Weight (approximate)
Empty weight 54,917 lbs 24,910 kg
Gross vehicle weight 116,823 lbs 52,990 kg
Weight distribution:
Empty:
Front axle 57.0%
Center axle 23.0%
Rear axles 20.0%
Loaded:
Front axle 29.0%
Center axle 36.5%
Rear axles 34.5%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 102.6 U.S. gal 388.3 L
Engine oil 9.2 U.S. gal 35 L
Torque converter, transmission and retarder cooling 25.9 U.S. gal 98 L
Differentials (total) 18.9 U.S. gal 71.5 L
Final drives (total) 6.1 U.S. gal 23 L
Hydraulic system 27.2 U.S. gal 103 L
Suspension (total) 2.7 U.S. gal 10.4 L

Komatsu Trucks 860E-1K

860E-1K Electric Drive Truck

The 860E-1K utilizes Komatsu Drive with Siemens AC control and liquid cooled Insulated Gate Bipolar Transistor (IGBT) inverter system for the highest available reliability. Hill Start allows the operator to start on a grade without roll back. Traction control assists the operator to power through wet sloppy underfoot condition. Oil cooled multi-disc brakes and retarder give the operator confidence in his control and stopping ability, especially when fully loaded. A front mounted elevating pantagraph can be mounted to allow the Komatsu Trucks 860E-1K to utilize electrified overhead trolley lines.

Engine
Make and model Komatsu SSDA16V160 Tier 2
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower* @ 1900 rpm 2,700 HP 2014 kW
Net flywheel power** @ 1900 rpm 2,550 HP 1902 kW
Weight (wet) 21,182 lb 9608 kg
* Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer’s approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
**Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Drive System* Komatsu AC Drive
Alternator DRLDZ5010-AL
Dual Fan Main Blower 14,800 cfm 419 m³/min
Control IGBT AC Torque Control System
Ratio 35.52:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor drive system application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, radial tires:
Standard tire* 50/80 R57
Optional tire* 50/90 R57
Flange mount rim 34'' x 57'' x 6'' rim assembly 864 mm x 1448 mm x 152 mm rim assembly
Typical total tire weight 50,780 lb 23033 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Tapered body, body up sling and frame mounted rubber pads are standard. Heated body optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.39' 10 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.31'' 8 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel
0.24'' 6 mm
Capacity struck 160 yd³ 122 m³
SAE heaped 2:1 221 yd³ 169 m³
Standard Komatsu body weight 74,171 lb 33643 kg
Cab
Advanced Operator Environment with isolation mounted, integral 4- post ROPS/FOPS Level 2 structure. Adjustable air suspension seat w/lumbar support, arm rests, and 3-point seat belt, full-size passenger seat, thermal insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.57'' 40 mm
Side plate thickness / Rear 0.75'' 19 mm
Side plate thickness / Front 0.87'' 22 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Max. service apply pressure 2,400 psi 16547 kPa
Total friction area per brake 11,693 in² 75439 cm²
Secondary brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade at maximum gross vehicle weight.
Electric dynamic retarder 4,650 hp 3469 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.32'' 313 mm
Max. rear stroke 11.50'' 292 mm
Max. rear axle oscillation 10.4°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank.
Radiator frontal area 62.5 ft² 5.81 m²
Service Capacities
Cooling System 125 U.S. gal 473 L
Crankcase 74 U.S. gal 280 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 32 U.S. gal 121 L
Inverter cooling system 6.5 U.S. gal 25 L
Fuel 1,200 U.S. gal 4542 L
Reserve Oil® System 30 U.S. gal 114 L
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 102' 31 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 22 sec
Power-down (high idle) 13 sec
Float-down (low idle) 23 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 17237 kPa / 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 18960 kPa / 2,750 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Quick disconnects standard for powering disabled truck and for systems diagnostics.
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24 volt, 140 amp
Lighting 24 volt
Cranking motors Two/24 volt

John Deere Articulated Dump Trucks 410E
Nothing runs like a Deere, because nothing is built like it.

Our E-Series ADTs boast an abundance of uptime-boosting advantages. Its purpose-built powertrain incorporates a PowerTechTM Plus 13.5-L IT4 diesel and heavy-duty John Deere-built axles. High-alloy steel dump bodies and chassis deliver superior strength and rigidity without excess weight. And highly efficient cooling systems with on-demand fans help preserve precious fuel. That's just for starters. We added swing-out fans and coolers for quick and easy cleaning. Plus, standard tire-pressure monitoring, common hydraulic and transmission oils, greaseless bushings, onboard payload weighing system, and numerous other features that help stretch your dollars and avoid taxing your service personnel. When you see the results, you'll run a Deere.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech 6135
Net Power, kW (hp) @ Rated rpm 330 (443) @ 1900
Displacement, L (cu in) 13.5 (824)
Calculated Torque Rise (percentage) --
Transmission
Transmission Manufacturer John Deere
Transmission Type Powershift
Number of Gears Forward and Reverse 8F - 4R
Max. Travel Speed - fwd, kph (mph) 55 (34)
Max. Travel Speed - rev, kph (mph) 17 (11)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Cross-axle Diff Lock
Brakes
Service Brake Type Wet Multi Disc
Engine Brake Transmission
Retarder Other Type --
Parking Brake Type Spring Applied / Hydraulically Released
Suspension
Front Type A-Frame
Front Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Rear Type Pivoting Walking Beam
Rear Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Load Body
Construction Standard
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 13
Body Tipping Time to Lower seconds 7
Tip Cylinders Type Twin 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.2
Secondary Steering Type Yes
Dimension
Overall Length, mm (ft in) 10810 (35 ft 6 in)
Overall Tire Width, mm (ft in) 3410 (11 ft 2 in)
Overall Height, mm (ft in) 3860 (12 ft 8 in)
Loadover Height, mm (ft in) 3300 (10 ft 10 in)
Approach Angle degrees 26
Outside Turning Radius, mm (ft in) 8900 (29 ft 2 in)
Inside Turning Radius, mm (ft in) 4630 (15 ft 2 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 29.5 R25
Capacities
Fuel Tank, L (gal) 609 (161)
Hydraulic Reservoir, L (gal) 242 (64)
Payload
Capacity Struck, cu m (cu yd) 17.8 (23.3)
Capacity Heaped SAE 2:1, cu m (cu yd) 22.7 (29.7)
Weight
Operating Weight Empty, kg (lb) 31853 (70224)
Payload Weight, kg (lb) 37266 (82157)
Gross Weight, kg (lb) 69119 (152382)
Gross Weight, kg (lb) 69119 (152382)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics