Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in West Poland, Maine

In the construction industry, one of the best ways to free up your company’s capital is to opt for a rental model for heavy construction equipment in West Poland. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in West Poland, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental West Poland, Construction equipment rental West Poland, Construction West Poland, Heavy Equipment Rental West Poland.

Komatsu Excavators PC2000-8
PC2000-8 Hydraulic Excavator

Komatsu’s “Operator First” design concept is exemplified in the PC2000-8 Hydraulic Excavator. The cab is designed for mining with 30% more cab volume, a full front window with two wipers, OPG level 2 top cab guard, extensive exterior lighting, a 7" LCD color monitor with Eco-gauge and an air suspension seat. The operator can tailor his machine performance using the Economy, Power or Heavy Lift modes for maximizing efficiency.

Engine
Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled
Number of cylinders 12
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 1860 in³ 30.48 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 - Gross 976 HP 728 kW
ISO 9249 / SAE J1349 - Net 956 HP 713 kW
Hydraulic fan at maximum speed 910 HP 679 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulic System
Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable displacement piston pumps
Pumps for Boom, arm, bucket, swing and travel circuits
Maximum flow:
For attachment, swing and travel 612.2 U.S. gpm 2317 ltr/min
For fan drive 85.6 U.S. gpm 324 ltr/min
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Fan 2 x axial piston motors
Relief valve setting:
Attachment circuits:
Backhoe 4,270 psi 29.4 MPa 300 kgf/cm2
Loading shovel 4,270 psi 29.4 MPa 300 kgf/cm2
Travel circuit 4,760 psi 32.9 MPa 335 kgf/cm2
Swing circuit 4,270 psi 29.4 MPa 300 kgf/cm2
Pilot circuit 430 psi 2.9 MPa 30 kgf/cm2
Hydraulic cylinders:
Number of cylinders Bore x Stroke Bore x Stroke
Backhoe:
Boom / 2 11.8" x 104.2" 300 mm x 2647 mm
Arm / 2 9.8" x 84.2" 250 mm x 2138 mm
Bucket 7.9" x 85.4" 200 mm x 2170 mm
Loading shovel:
Boom / 2 11.0" x 76.0" 280 mm x 1930 mm
Arm / 2 7.9" x 85.4" 200 mm x 2170 mm
Bucket / 2 8.9" x 80.7" 225 mm x 2050 mm
Bottom dump / 2 7.1" x 23.6" 180 mm x 600 mm
Swing System
Swing gear 2 x Planetary gear
Swing circle lubrication Grease
Swing holding brakes Mechanical disc brakes
Swing speed 4.8 rpm
Drive System
Travel gear Planetary gear
Gradeability 65%
Maximum travel speed 1.7 mph 2.7 km/h
Parking brakes Mechanical disc brakes
Undercarriage
Track adjuster Grease
No. of shoes 49 each side
No. of carrier rollers 3 each side
No. of track rollers 8 each side
Coolant and Lubricant Capacity (Refilling)
Fuel tank 898.3 U.S. gal 3400 ltr
Radiator 47.6 U.S. gal 180 ltr
Engine 31.7 U.S. gal 120 ltr
Travel gear, each side 22.5 U.S. gal 85 ltr
Swing drive 7.9 x 2 U.S. gal 30 x 2 ltr
Hydraulic tank 343.5 U.S. gal 1300 ltr
PTO 7.9 U.S. gal 30 ltr

Komatsu Excavators PC210LC-10 Super Long Front

PC210LC-10 Super Long Front

Take one of the most popular and productive excavators in the world, add a long front and you've got an incredibly versatile machine with a huge working range. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:
  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY" work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Komatsu Excavators PC45MR-3
PC45MR-3 Hydraulic Excavator

Got a job in tight quarters where you need to dig down 12 feet? No problem. The Komatsu Hydraulic Excavators PC45MR-3 can handle it and it also gives you the advantage of a swinging boom to get right up to foundations and the option of rubber, steel or roadliner tracks.

Engine
Model Komatsu 4D88E-6
Type Direct injection
Piston displacement 134 in³ 2.19 ltr
Horsepower @ 2400 rpm:
Net (ISO 9249/SAE J1349) 38.2 HP 28.5 kW
Electric System
Operation voltage 12 V
Battery 72 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 14.1 x 2 + 8.9 gal/min 53.5 x 2 + 33.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,840 psi 270 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 2.9 mph 4.6 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 3.6 psi 0.25 kg/cm²
Max. drawbar pull 9,440 lb 4280 kg
Gradeability 30°
Bucket digging force (ISO) 7,630 lb 3460 kg
Arm crowd force (ISO) 4,850 lb 2200 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 17.2 U.S. gal 65 ltr
Hydraulic tank 5.3 U.S. gal 20 ltr
Engine 2.0 U.S. gal 6.7 ltr
Coolant 2.2 U.S. gal 8.5 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 10,571 lb 4795 kg
Blade
Width x height 6'5" x 1'2" 1960 x 355 mm

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics