Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Burkittsville, Maryland

Healthy credit lines, no liabilities on your balance sheet and no binding agreements – these are the top advantages of heavy construction equipment rentals in Burkittsville. If you too are keen to rent various equipments for a new or ongoing project for few days, weeks or months at a stretch, we can help!

Call us at our toll free number or submit the contact form (on the right) to get started! With our network of vendors at your service, you will never have to worry about your borrowing power in future.

Once you establish contact, our trusted vendors with inventories of different types of construction equipment and supplies will get in touch with you and learn about your requirements.

From backhoes, bulldozers and crushers to excavators, off-road trucks and other heavy machinery, you can get all kinds of equipment at an affordable price now.

Equipment Rental Burkittsville, Construction equipment rental Burkittsville, Construction Burkittsville, Heavy Equipment Rental Burkittsville.

Komatsu Dozer D275AX-5WH
The D275AX-5WH is a dozer specially equipped to fill the requirements of the sanitary landfill market. Guarding like fore and aft striker bars, belly pan with electric winch, chassis seal package and seal guards on the final drives, pivot shafts and idlers provide the protection needed in the severe landfill environment. Hydrostatic steering gives the D275AX-5SL the maneuverability required on a landfill and the lock-up torque converter provides the pushing power needed while still saving fuel.

Net Horsepower 410 HP 306 kw
Operating weight (Approx.) 116,528 lb** 52856 kg**
Engine Model Komatsu SAA6D140E-5
Rated Engine RPM 2000
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Track rollers (each side) 7
Carrier rollers (each side) 2
Width of standard track shoe 24" 610 mm
Length of track on ground 2000 rpm
Fan drive type 11'5" 3480 mm
Ground contact area (with standard shoe) 6,580 in² 42456 cm²
Track gauge 7'5" 2260 mm
** with Full-U Blade
Note: Operating weight includes blade indicated, landfill counterweight, steel cab, ROPS, operator, standard equipment, landfill package, rated capacity of lubricant, coolant, and full fuel tank.

Komatsu Dozers D39EXi-23
D39EXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Automated operation from rough dozing to finish grade.

New dozing mode, load control performance features.

Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

 Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 8.5 km/h / 5.3 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.


Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)
5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system 
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Ripper lift   Raise, hold, and lower

John Deere Crawler Loaders 755K
Designed to meet the most demanding specs - yours.

Inspired by input from owners and operators across North America, the re-imagined 755K Crawler Loader is loaded with productivity- and uptime-boosting enhancements. Like an ultra-quiet, completely redesigned operator station. More control choices. An innovative on-demand cooling system with optional hydraulic reversing fan. And quicker daily, and less frequent, periodic maintenance. Plus its EPA Interim Tier 4 (IT4)/EU Stage IIIB engine meets rigid emission standards, so you can work the 755K wherever there's work, even in nonattainment areas.

Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech PVX 6068
Net Power, kW (hp) @ Rated rpm 142 (190) @ 1800
Displacement, L (cu in) 6.8 (414)
Voltage 24
Alternator amps 100
Type Hydrostatic
Max. Travel Speed - fwd, kph (mph) 10 (6.2)
Max. Travel Speed - rev, kph (mph) 10 (6.2)
Type In-line Drive Motor
Type Yes - Hydrostatic
Pump Type Piston Pump - Load Sensed
Total Pump Flow, L/m (gpm) 246 (65)
System Pressure, kPa (psi) 26028 (3775)
Track Gauge, mm (ft in) 1880 (6 ft 2 in)
Length of Track on Ground, mm (in) 2588 (102)
Track Shoe Width, mm (in) 560 (22)
Ground Contact Area, sq cm (sq in) 28985 (4493)
Ground Pressure, kPa (psi) 76.5 (11.1)
No. of Track Rollers - per side 6
Track Pitch, mm (in) 203 (8)
Track Shoes, per side 38
SAE Heaped Capacity, cu m (cu yd) 2.5 (3.2)
Bucket Width, mm (ft in) 2591 (8 ft 6 in)
SAE Breakout Force, kN (lb) 197 (44300)
SAE Tipping Load, kN (lb) 15362 (33867)
Dump Clearance, mm (ft in) 2950 (9 ft 8 in)
Hinge Pin Height, mm (ft in) 4080 (13 ft 5 in)
Digging Depth, mm (in) 167 (6.6)
Reach @ Maximum Height, mm (ft in) 1100 (3 ft 7 in)
Height w/ROPS, mm (ft in) 3330 (10 ft 11 in)
Length w/Loader Bucket, mm (ft) 6824 (22 ft 5 in)
Ground Clearance, mm (in) 432 (17)
Fuel Tank, L (gal) 326 (86)
Hydraulic Reservoir, L (gal) 121 (32)
SAE Operating Weight, kg (lb) 20492 (45178)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics