Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Clarksville, Maryland

Healthy credit lines, no liabilities on your balance sheet and no binding agreements – these are the top advantages of heavy construction equipment rentals in Clarksville. If you too are keen to rent various equipments for a new or ongoing project for few days, weeks or months at a stretch, we can help!

Call us at our toll free number or submit the contact form (on the right) to get started! With our network of vendors at your service, you will never have to worry about your borrowing power in future.

Once you establish contact, our trusted vendors with inventories of different types of construction equipment and supplies will get in touch with you and learn about your requirements.

From backhoes, bulldozers and crushers to excavators, off-road trucks and other heavy machinery, you can get all kinds of equipment at an affordable price now.

Equipment Rental Clarksville, Construction equipment rental Clarksville, Construction Clarksville, Heavy Equipment Rental Clarksville.

Push Around Vertical Mast Lift 41AM

JLG Push Around Vertical Mast Lift 41AM
Key Specs

  • Machine Width: 2 ft 5 in. / 0.74 m
  • Platform Height: 40 ft 9 in. / 12.42 m

Key Features

  • Most rigid mast in the industry for operator comfort and stability
  • Six-wheel design for improved maneuverability
  • Long battery duty cycles and an automatic charger for more productivity
Dimensional Data
Wheel Size - Front Caster 6 x 2"
Ground Entry Height 1 ft 7 in. / 0.48 m
Machine Height 8 ft 8 in. / 2.64 m
Machine Length 4 ft 10 in. / 1.46 m
Machine Width 2 ft 5 in. / 0.74 m
Outrigger Footprint Length 6 ft 7 in. / 2.01 m
Outrigger Footprint Width 6 ft 7 in. / 2.01 m
Platform Dimension A 2 ft 2 in. / 0.66 m
Platform Dimension B 2 ft 2 in. / 0.65 m
Platform Height 40 ft 9 in. / 12.42 m
Wheel SIze - Rear 10 x 2"
Reach Specifications
Platform Height 40 ft 9 in. / 12.42 m
Working Height 47 ft / 14.33 m
Performance
Outriggers Up Max Lift Height 41 ft / 12.44 m
Outriggers or Stabilizers Yes
Platform Capacity 300 lb / 136.08 kg
General
Machine Weight-AC 1100 lb / 498.95 kg
Machine Weight-DC 1230 lb / 557.92 kg

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h
4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h
7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h
8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h
13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h
15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h
24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h
24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

John Deere Wheel Loader 644K (Hybrid-Drive)
Easy and efficient.

Whether your operators are jobsite veterans or just getting their boots dirty, the 644K Hybrid Loader will make them more productive and efficient. The hybrid-electric powertrain with reduced mechanical complexity delivers amazing responsiveness for efficient stockpiling, ramp climbing, and truck loading. And it consumes an average of 25% less fuel than our conventional 644K Loader with lockup torque converter.* The 644K Hybrid Loader - taking John Deere productivity, uptime, and low daily operating costs to the next level.

ENGINE
Engine Make / Engine Model John Deere / PowerTech PSX 6068
Emission Rating Interim Tier 4
Net Power, kW (hp) @ Rated rpm 171 (229) @ 1700
Displacement, L (cu in) 6.8 (414)
Net Peak Torque, N-m (lb-ft) 991 (730)
Calculated % Torque Rise 19
ELECTRICAL
Voltage 24
Alternator amps 100
TRANSMISSION
Type Powershift w/Hybrid-Electric Drive
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 40 (24.9)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary
Rear Axle Type Planetary
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 310 (82)
System Pressure, kPa (psi) 25166 (3650)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 3.1 (4)
Bucket Capacity Max., cu m (cu yd) 3.2 (4.25)
Breakout Force, Std Bucket, kN (lb) 150.8 (33903)
Ride Control Yes
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 3.2 (4.25)
Tire Size Standard 23.5 R25
TIPPING LOAD
Straight, kg (lb) 14089 (31061)
Full Turn, kg (lb) 12243 (26991)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4120 (13 ft 6 in)
Dump Clear @ 45 deg, mm (ft in) 2910 (9 ft 7 in)
Reach @ 7', mm (ft in) 1610 (5 ft 3 in)
Reach @ Full Height, mm (ft in) 1060 (3 ft 6 in)
Wheelbase, mm (ft in) 3260 (10 ft 8 in)
Clearance Circle, mm (ft in) not published
Overall Length, mm (ft in) 8100 (26 ft 7 in)
Height to Top of Cab, mm (ft in) 3430 (11 ft 3 in)
Ground Clearance, mm (in) 461 (18.1)
CAPACITIES
Fuel Tank, L (gal) 397 (105)
Hydraulic Reservoir, L (gal) 106 (28)
WEIGHT
SAE Operating Weight, kg (lb) 18341 (40435)
Metric Ton Weight, kg (lb) 18.341 (40.435)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics