Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Halifax, Massachusetts

Do you need to supplement your core fleet or are in need of a vendor who can provide you with everything from the simplest of construction supplies such as shovels to heaviest of machines such as excavators?

If so, you’ve just landed on the right page. We represent the biggest network of heavy construction equipment rental service providers in the region and no matter how small, big or varied your requirements for construction equipment in Halifax are, we will comfortably meet them!

We like to exceed the expectations contractors have from us and we’ve been doing that through our premier services for a long time now!

Pick your phone and call the toll free number right away to get started. No obligations attached! You can also fill out the quick online form on the right and we will get in touch with you for a quick discussion at the earliest.

Equipment Rental Halifax, Construction equipment rental Halifax, Construction Halifax, Heavy Equipment Rental Halifax.

 Komatsu Dozer D155AX-7 WH
D155AX-7 WH
The D155AX-7WH is a dozer that bridges the gap between contractor site prep dozers and large contractor production/mining dozers. The Tier 4 interim D155AX-7WH has the precise and responsive hydraulic control and smooth turning of hydrostatic steering of smaller dozers for grading and big dozer features like a lock-up torque converter, Unique, high production Sigma dozer blade and K-bogie oscillating undercarriage.

Engine
Model Komatsu SAA6D140E-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed and mid-range, electronic
Horsepower :
SAE J1995 - Gross 360 HP 268 kW
ISO 9249 / SAE J1349 - Net 354 HP 264 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system :
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed:
1st Gear forward 2.4 mph 3.8 km/h
1st Gear reverse 2.9 mph 4.6 km/h
2nd Gear forward 3.5 mph 5.6 km/h
2nd Gear reverse 4.2 mph 6.8 km/h
3rd L Gear forward 4.7 mph 7.5 km/h
3rd L Gear reverse 5.7 mph 9.2 km/h
3rd Gear forward 7.2 mph 11.6 km/h
3rd Gear reverse 8.7 mph 14.0 km/h
Final Drive
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy inthe- field replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gearshift lock lever also applies parking brakes.

Minimum turning radius 7'0" 2.14 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension Oscillation-type with equalizer bar and forward mounted pivot shafts
Track roller frame Monocoque, high-tensilestrength steel construction
Rollers and idlers Lubricated
Number of shoes (each side) 42
Grouser height 3.1" 80 mm
Shoe width (standard/maximum) 610 mm / 710 mm 24" / 28"
Ground contact area 6,193 in² 39955 cm²
Ground pressure (tractor only) 11.9 psi 82.4 kPa / 0.84 kg/cm²
Number of track rollers (each side) 7
Number of carrier rollers (each side) 2
Service Refill Capacities
Fuel tank 165 U.S. gal 625 ltr
Coolant 27.3 U.S. gal 103.5 ltr
Engine oil 9.8 U.S. gal 37 ltr
Damper 0.4 U.S. gal 1.5 ltr
Hydraulic oil 24.2 U.S. gal 91.5 ltr
Transmission, bevel gear, and steering system 23.8 U.S. gal 90 ltr
Final drive (each side) 8.2 U.S. gal 31 ltr
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator and standard equipment.Operating weight
Including strengthened SIGMADOZER®, giant ripper, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Tractor weight 68,350 lb 31000 kg
Operating weight 87,100 lb 39500 kg
Ground pressure 15.4 psi 106 kPa / 1.08 kg/cm²
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 325 ltr/min 85.9 U.S. gal/min for steering and 180 ltr/min 47.6 U.S. gal/min for implemented at rated engine rpm.

Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi

Control valves:
Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U
Positions: Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions: Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Number of cylinders Bore Bore
Blade Lift / 2 4.33" 110 mm
Blade Tilt (Dual tilt) / 2 6.30" 160 mm
Blade Tilt (Single Tilt) / 1 6.30" 160 mm
Ripper Lift 7.09" 180 mm
Ripper Tilt / 1 7.87" 200 mm
Hydraulic oil capacity (refill):
SIGMADOZER 22.5 U.S. gal 85 ltr
Semi-U dozer 22.5 U.S. gal 85 ltr
Full-U dozer 22.5 U.S. gal 85 ltr
Ripper equipment (additional volume):
Multi-shank ripper 9.8 U.S. gal 37 ltr
Giant ripper 9.8 U.S. gal 37 ltr

A large number of construction industry and warehouse management professionals now look at forklift rentals in Pepeekeo as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Pepeekeo who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

A large number of construction industry and warehouse management professionals now look at forklift rentals in Kaunakakai as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Kaunakakai who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics