Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hyde Park, Massachusetts

Do you need to supplement your core fleet or are in need of a vendor who can provide you with everything from the simplest of construction supplies such as shovels to heaviest of machines such as excavators?

If so, you’ve just landed on the right page. We represent the biggest network of heavy construction equipment rental service providers in the region and no matter how small, big or varied your requirements for construction equipment in Hyde Park are, we will comfortably meet them!

We like to exceed the expectations contractors have from us and we’ve been doing that through our premier services for a long time now!

Pick your phone and call the toll free number right away to get started. No obligations attached! You can also fill out the quick online form on the right and we will get in touch with you for a quick discussion at the earliest.

Equipment Rental Hyde Park, Construction equipment rental Hyde Park, Construction Hyde Park, Heavy Equipment Rental Hyde Park.

New Holland Skid Steer Loader L213

Skid Steer Loader - L213

MORE DIGGING AND PUSHING POWER BY DESIGN
New Holland Skid Steer Loader model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844L
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Naturally aspirated
Horsepower per SAE J1349 Gross hp (kW) 49 (36) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 46 (34) @ 2800 rpm
Peak torque, lb-ft (Nm) 105.5 (143) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional), mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised, in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan), in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in (mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 17.5 (66.2)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1300 (590)
Tipping load, lbs (kg) 2600 (1179)
Breakout force, lift cylinder, lbs (kN) 2850 (12.7)
Breakout force, bucket cylinder, lbs (kN) 4180 (18.6)
Operating weight, lbs (kg) 5070 (2300)

JCB Light Equipment Diamond Core Drill

Diamond Core Drill

The heavy-duty JCB diamond core drill is designed to provide an unrivalled combination of power, flexibility and reliability for all manner of diamond core drilling jobs.

Diamond core drilling is the best way to get a clean cut on both sides of the drilled hole, and JCB's hydraulic drive provides extra benefits.
For example, it can withstand prolonged use and a constant operator-applied pressure without burning out motors, clutches or gearboxes.

What's more, our diamond core drill is over three times more powerful than a typical electric drill, meaning vastly reduced job times and a greater range of applications. In spite of all that, the motor noise is negligible.

Choose from a 2400 RPM @ 20 l/min model for 15-35 mm bits, or a 600 RPM @ 20 l/min option for 40-125 mm bits. Either can be either hand-held or rig mounted.

    • Side handle for ease of use
    • Tail hoses with quick release dripless couplings for speed of attachment change
    • Water hose port for dust suppression and cooling
    • Can be used under water for extra versatility
    • Optional drilling rigs
    • Optional core drill bits
    • Optional pressurised water hand pump
    • Optional extension rods

JCB Light Equipment Disc Cutter

Disc Cutter

The JCB disc cutter is a well-balanced, quiet unit designed for use with JCB powerpacks. It can cut most materials including metals, concrete, and stone.

Our disc cutter has a tooth belt drive and totally enclosed working parts, which is ideal in dusty and dirty working conditions. The disc is protected by a steel guard, and adjustable to any of three positions, which makes it perfect for most work sites and applications.

Finally, because it's hydraulic, the JCB disc cutter is low maintenance (no carburettor to block), very quiet and almost vibration-free.

    • Flow regulator to prevent over-speeding
    • djustable guard for safety
    • One stone cutting disc and one metal cutting disc included
    • Removable handle for right or left hand operation
    • Tail hoses with flat faced quick release dripless couplings for speed of change

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics