Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Hernando, Mississippi

If you are on the lookout for vendors who can supply heavy construction equipment for a new or ongoing project in Porterville, contact us and we will set you up in as little as one day!

Yes, getting started is easy. You just have to dial our toll free number or submit the contact form on the right.

Once we learn about the heavy machinery or tools you need at the construction site, we will put you in touch with trusted vendors offering construction equipment rentals in Hernando. You need not worry about the transportation of equipment/tools to the jobsite (even if it is to be one on a short notice).

When you are on a deadline, look no further than our reliable network of equipment vendors for one click or one phone-call access to all kinds of construction tools and machines.

Equipment Rental Hernando, Construction equipment rental Hernando, Construction Hernando, Heavy Equipment Rental Hernando.

Komatsu Excavators PC55MR-3
PC55MR-3 Hydraulic Excavator

You'll be surprised the amount a work 38 horsepower can do when it's harnessed in the PC55MR-3. Constructed like a big Komatsu excavator with a high strength x-frame, PPC joysticks, pattern change valve but with the addition of a swinging boom, three track option and tight tail swing, the  PC55MR-3 Hydraulic Excavator is ready for any challenge you can put in it's way.

Engine
Model Komatsu 4D88E-6
Type Direct injection
Piston displacement 134 in³ 2.19 ltr
Horsepower @ 2400 rpm:
Net (ISO 9249/SAE J1349) 38.2 HP 28.5 kW
Electric System
Operation voltage 12 V
Battery 72 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 14.1 x 2 + 8.9 gal/min 53.5 x 2 + 33.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,840 psi 270 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 2.9 mph 4.6 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 4.4 psi 0.31 kg/cm²
Max. drawbar pull 9,440 lb 4280 kg
Gradeability 30°
Bucket digging force (ISO) 8,770 lb 3980 kg
Arm crowd force (ISO) 5,380 lb 2440 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 17.2 U.S. gal 65 ltr
Hydraulic tank 5.3 U.S. gal 20 ltr
Engine 2.0 U.S. gal 7.5 ltr ltr
Coolant 2.2 U.S. gal 8.5 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 11,380 lb 5160 kg
Blade
Width x height 6'5" x 1'2" 1960 x 355 mm

A large number of construction industry and warehouse management professionals now look at forklift rentals in Higley as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Higley who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Komatsu Excavators PC1250LC-8 MH
PC1250LC-8 MH Material Handler (55'-70' Reach)

If you have a material handling application that needs high lift and plenty of lifting power, the PC1250LC-8 MH requires a closer look. An elevated cab, with tiltable structure for service access, and up to a 70 - two piece front give the PC1250LC-8 MH tremendous operating range.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed / Net 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Electronic Open-center Load Sensing System (EOLSS)
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 494 ltr/min 2 x 130.5 U.S. gpm
For swing 1 x 600 ltr/min 1 x 158.5 U.S. gpm
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders Bore x Stroke bore x stroke
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 10.0" x 110.0" 254 mm x 2794 mm
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 70000 kg / 686 kN
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 55 each side
No. of carrier rollers 3 each side
No. of track rollers 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr
Operating Weight (approximate)
Operating weight w/o Grapple:
55' / 16.8 m 244,418 lb 110868 kg
70' / 21.3 m 279,157 lb 126626 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics