Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Gerlach, Nevada

Your search for a super quality, personalized construction equipment rental service in Gerlach comes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Gerlach with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Gerlach, Construction equipment rental Gerlach, Construction Gerlach , Heavy Equipment Rental Gerlach.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Articulated Dump Trucks 410E
Nothing runs like a Deere, because nothing is built like it.

Our E-Series ADTs boast an abundance of uptime-boosting advantages. Its purpose-built powertrain incorporates a PowerTechTM Plus 13.5-L IT4 diesel and heavy-duty John Deere-built axles. High-alloy steel dump bodies and chassis deliver superior strength and rigidity without excess weight. And highly efficient cooling systems with on-demand fans help preserve precious fuel. That's just for starters. We added swing-out fans and coolers for quick and easy cleaning. Plus, standard tire-pressure monitoring, common hydraulic and transmission oils, greaseless bushings, onboard payload weighing system, and numerous other features that help stretch your dollars and avoid taxing your service personnel. When you see the results, you'll run a Deere.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech 6135
Net Power, kW (hp) @ Rated rpm 330 (443) @ 1900
Displacement, L (cu in) 13.5 (824)
Calculated Torque Rise (percentage) --
Transmission
Transmission Manufacturer John Deere
Transmission Type Powershift
Number of Gears Forward and Reverse 8F - 4R
Max. Travel Speed - fwd, kph (mph) 55 (34)
Max. Travel Speed - rev, kph (mph) 17 (11)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Cross-axle Diff Lock
Brakes
Service Brake Type Wet Multi Disc
Engine Brake Transmission
Retarder Other Type --
Parking Brake Type Spring Applied / Hydraulically Released
Suspension
Front Type A-Frame
Front Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Rear Type Pivoting Walking Beam
Rear Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Load Body
Construction Standard
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 13
Body Tipping Time to Lower seconds 7
Tip Cylinders Type Twin 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.2
Secondary Steering Type Yes
Dimension
Overall Length, mm (ft in) 10810 (35 ft 6 in)
Overall Tire Width, mm (ft in) 3410 (11 ft 2 in)
Overall Height, mm (ft in) 3860 (12 ft 8 in)
Loadover Height, mm (ft in) 3300 (10 ft 10 in)
Approach Angle degrees 26
Outside Turning Radius, mm (ft in) 8900 (29 ft 2 in)
Inside Turning Radius, mm (ft in) 4630 (15 ft 2 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 29.5 R25
Capacities
Fuel Tank, L (gal) 609 (161)
Hydraulic Reservoir, L (gal) 242 (64)
Payload
Capacity Struck, cu m (cu yd) 17.8 (23.3)
Capacity Heaped SAE 2:1, cu m (cu yd) 22.7 (29.7)
Weight
Operating Weight Empty, kg (lb) 31853 (70224)
Payload Weight, kg (lb) 37266 (82157)
Gross Weight, kg (lb) 69119 (152382)
Gross Weight, kg (lb) 69119 (152382)


John Deere Motor Graders 772G/GP
The genius behind our grader controls.

Armed with input from the people who run them, we set out to design the ideal operating system for our next-generation graders. You talked, we listened, and that's why we offer a choice of controls. Our G-Series models come standard equipped with conventional mechanical levers positioned in the industry accepted pattern and deliver precise, predictable low-effort control. For unsurpassed productivity opt for a GP model. Eight armrest-mounted fingertip-actuated controls, including steering lever, are arranged in the industry-standard pattern on each side of the steering wheel.

Further with high/wide-back and heated lower cushion, the 772GP Motor Grader's air-suspension seat provides exceptional daylong comfort. Automated cross-slope simplifies holding a consistent slope by reducing operation to a single lever. It's a Grade Pro (GP) exclusive that helps veteran operators be their best and inexperienced operators get up-to-speed more quickly.

ENGINE
Emission Rating Final Tier 4
Engine Make / Engine Model John Deere / PowerTech PSS 9.0L
Net Peak Power, kW (hp) 176 (236)
Gross Power, kW (hp) not published
Displacement, L (cu in.) 9 (548)
Calculated % Torque rise 61
ELECTRICAL
Volts 24
Alternator amps 100
TRANSMISSION ---
Type ---
Speed Range - Forward 8
Speed Range - Reverse 8
Max. Travel Speed - fwd, kph (mph) 45.5 (28.3)
Max. Travel Speed - rev, kph (mph) ---
FINALDRIVE
Type Powershift
DIFFERENTIAL LOCK 
Type Tandem
BRAKES
Type ---
System Pressure, kPa (psi) Hydraulic
FRONTWHEEL DRIVE
Type Disc
HYDRAULIC SYSTEM
Pump Type Variable axial piston
Pump Flow, L/min (gpm) 212 (56)
System Pressure, kPa (psi) 18961 (2750)
STEERING & ARTICULATION
Frame Type Articulated
Articulation, deg 22
Turn Radius, m (ft in) 7.21 (23 ft 8 in)
Front Wheel Lean, deg ---
BLADE RANGE
Bank Cut Angle, deg 90
Shoulder Reach Outside Wheels, Right, mm (ft in) 2083 (6 ft 10 in)
Shoulder Reach Outside Wheels, Left, mm (ft in) 2083 (6 ft 10 in)
Blade Lift Above Ground, mm (in) 490 (19.3)
Blade Pitch Operation, Adjustment Fwd, deg 42
Blade Pitch Operation, Adjustment Rear, deg 5
Blade Side Shift, Right, mm (in) 683 (26.9)
Blade Side Shift, Left, mm (in) 683 (26.9)
Circle Rotation, deg 360
Circle Diameter, mm (in) 1524 (60)
TIRES
Standard 14.00 - 24
DIMENSIONS
Wheelbase, mm (ft in) 6160 (20 ft 3 in)
Blade Base, mm (ft in) 2570 (8 ft 5 in)
Overall Length, mm (ft in) 8890 (29 ft 2 in)
Height w/ROPS, mm (ft in) 3180 (10 ft 5 in)
Clearance Under Front Axle, mm (in) not published
MOLDBOARD
Length, mm (ft in) 3660 (12 ft )
Thickness, mm (in) 22 (0.88)
Height, mm (ft) 610 (24)
Optional Moldboard Lengths, mm (ft in) not published
CAPACITIES
Fuel Tank, L (gal) 416.5 (110)
Hydraulic Reservoir, L (gal) 60.5 (16)
weight
SAE Operating Weight, kg (lb) 17382 (38320)
Weight on Front Wheels, kg (lb) 4881 (10760)
Weight on Tandem Wheels, kg (lb) 12501 (27560)

John Deere Articulated Dump Trucks 250D-II
Get more bang from your truck.

If you're looking to deliver big numbers to your bottom line, put our D-Series II Articulated Dump Trucks on your jobsite. These ADTs haul heaped payloads over adverse terrain with unsurpassed agility. They're highly reliable, too, with high-strength, welded alloy-steel chassis and dump-body components that are durable, yet lightweight. The quiet cab is loaded with productivity- and uptime-enhancing features such as auto shutdown, pushbutton transmission and dump-body controls, onboard weighing, and tire-pressure monitoring, to list just a few. With the 250D-II and 300D-II ADTs, you get everything you need to keep materials and profits flowing.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech Plus 6090
Net Power, kW (hp) @ Rated rpm 198 (265) @ 2000
Displacement, L (cu in) 9 (549)
Calculated Torque Rise (percentage) 34
Transmission
Transmission Manufacturer ZF
Transmission Type Powershift
Number of Gears Forward and Reverse 6F - 1R
Max. Travel Speed - fwd, kph (mph) 50 (31)
Max. Travel Speed - rev, kph (mph) 8 (5)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Limited Slip Differentials
Brakes
Service Brake Type Dry Disc
Engine Brake Hydraulic - Transmission
Retarder Other Type --
Parking Brake Type Spring Applied / Air Released
Suspension
Front Type Leading Arm w/Transverse Link
Front Suspension Nitrogen/Oil-Filled Struts
Rear Type Walking Beam
Rear Suspension Rubber Bushed Links & Suspension Blocks
Load Body
Construction Rib Reinforced
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 11.9
Body Tipping Time to Lower seconds 6
Tip Cylinders Type Twin, 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.1
Secondary Steering Type Yes - Ground Driven Pump
Dimension
Overall Length, mm (ft in) 9500 (31 ft 2 in)
Overall Tire Width, mm (ft in) 2820 (9 ft 3 in)
Overall Height, mm (ft in) 3580 (11 ft 9 in)
Loadover Height, mm (ft in) 2640 (8 ft 8 in)
Approach Angle degrees 29
Outside Turning Radius, mm (ft in) 7920 (26 ft )
Inside Turning Radius, mm (ft in) 4170 (13 ft 8 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 23.5 R25
Capacities
Fuel Tank, L (gal) 340 (90)
Hydraulic Reservoir, L (gal) 79 (20.8)
Payload
Capacity Struck, cu m (cu yd) 10.5 (13.7)
Capacity Heaped SAE 2:1, cu m (cu yd) 13.8 (18)
Weight
Operating Weight Empty, kg (lb) 18314 (40340)
Payload Weight, kg (lb) 23222 (51150)
Gross Weight, kg (lb) 41536 (91490)
Gross Weight, kg (lb) 41536 (91490)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics