Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Carolina, Rhode-Island

We deliver comprehensive heavy construction equipment rental solutions in Carolina, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we've got you covered! The inventory of equipment in Carolina is more than enough to meet your requirements.

Equipment Rental , Construction equipment rental , Construction , Heavy Equipment Rental .

Unable to parse entered address. API response code: REQUEST_DENIED

Ultra Series Telescopic Boom Lift 1350SJP

JLG Ultra Series Telescopic Boom Lift 1350SJP

 

Key Specs

  • Horizontal Outreach: 80 ft / 24.38 m
  • Platform Capacity - Restricted: 1000 lb / 453.59 kg
  • Platform Capacity - Unrestricted: 500 lb / 226.80 kg
  • Platform Height: 135 ft / 41.15 m

Key Features

  • Ground to 135 ft up in 95 seconds
  • Strong 100,000-psi steel and a dual 1,000 / 500 lb capacity give you stability and capacity
  • Equipped with a fuel-efficient Tier 4 engine
Power Source
Auxiliary Power 12 Volts DC
Capacity - Fuel Tank 31 gal. / 117.35 L
Engine Type - Diesel DEUTZ TCD2.9L4 Tier 4 Final 74.2 hp
PERFORMANCE
Axle Oscillation 1 ft / 0.3 m
Drive Speed - 4WD 3 mph / 5.23 km/h
Gradeability - 4WD 45 %
Platform Capacity - Restricted 1000 lb / 453.59 kg
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Continuous
Turning Radius - Outside (axles extended) 19 ft 4 in. / 5.89 m
Turning Radius - Outside (axles retracted) 22 ft 6 in. / 6.86 m
dimensional data
Ground Clearance 1 ft / 0.3 m
Machine Height 10 ft / 3.05 m
Machine Length 48 ft 10 in. / 14.88 m
Machine Width 8 ft 2 in. / 2.49 m
Machine Width - Axles Extended 12 ft 6 in. / 3.81 m
Machine Length - Transport 38 ft 11 in. / 11.86 m
Platform Dimension A 3 ft / 0.91 m
Platform Dimension B 8 ft / 2.44 m
Platform Height 135 ft / 41.15 m
Tailswing 5 ft 6 in. / 1.68 m
Tire Size 445/500710 Foam-Filled
Reach specifications
Horizontal Jib Rotation 180 Degrees
Horizontal Outreach 80 ft / 24.38 m
Platform Height 135 ft / 41.15 m
Vertical Jib Rotation 130 Degrees
GENEral 
Capacity - Hydraulic Reservoir 55 gal. / 208.20 L
Ground Bearing Pressure 107 psi / 7.49 Kg/cm2
Machine Weight 45000 lb / 20411.66 kg

Articulating Boom Lifts 600AJN

Articulating Boom Lifts 600ajn

 

Key Specs

  • Horizontal Outreach: 39 ft 9 in. / 12.12 m
  • Platform Capacity - Unrestricted: 500 lb / 226.80 kg
  • Platform Height: 60 ft 7 in. / 18.47 m

Key Features

  • Best reach envelope in its class
  • Optional articulating jib gets you into hard-to-reach places
  • Narrow chassis for confined work areas
  • Equipped with a fuel-efficient Tier 4 engine
Power Source
Auxiliary Power 12 Volts DC
Capacity - Fuel Tank 30 gal. / 113.56 L
Engine Type - Diesel DEUTZ TD 2.9L Tier 4 Final 67 hp
Engine Type - Dual Fuel GM Vortec 3000 MPR, 82 hp
PERFORMANCE
Axle Oscillation 8 in. / 0.2 m
Drive Speed - 2WD 4 mph / 6.84 km/h
Gradeability - 2WD 30 %
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Continuous
Turning Radius - Outside (4WS) 11 ft 2 in. / 3.4 m
dimensional data
Ground Clearance 1 ft / 0.3 m
Machine Height 8 ft 4 in. / 2.54 m
Machine Length 29 ft / 8.83 m
Machine Width 7 ft / 2.13 m
Platform Dimension A 3 ft / 0.91 m
Platform Dimension B 8 ft / 2.44 m
Platform Height 60 ft 7 in. / 18.47 m
Tailswing 5 in. / 0.13 m
Tire Size 14 x 17.5 Air Boss
Reach specifications
Horizontal Jib Rotation 0 Degrees
Horizontal Outreach 39 ft 9 in. / 12.12 m
Platform Height 60 ft 7 in. / 18.47 m
Up and Over Height 26 ft 7 in. / 8.1 m
Vertical Jib Rotation 130 Degrees
general
Capacity - Hydraulic Reservoir 31 gal. / 115.83 L
Ground Bearing Pressure 94 psi / 6.58 Kg/cm2
Machine Weight 24200 lb / 10976.94 kg

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h
4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h
7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h
8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h
13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h
15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h
24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h
24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics