Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Foster, Rhode-Island

We deliver comprehensive heavy construction equipment rental solutions in Foster, every time. Opting for our unprecedented premier service is easy – just ring us on the toll free number or submit a message through the contact form on the right.

You can narrate your construction equipment requirements to us, tell us whether you need transportation services as well, and we will put you in touch with the right vendor in no time! Here, we do not operate as order takers only. We are an organization powered by years of first-hand experience in the construction industry and operate as problem solvers for construction industry players like you!

Do you need skid steers, excavators, boom lifts, etc. or construction tools and supplies for a major construction project or just want to equipment on rent on a job-to-job basis, we’ve got you covered! The inventory of equipment in Foster is more than enough to meet your requirements.

Equipment Rental , Construction equipment rental , Construction , Heavy Equipment Rental .

Unable to parse entered address. API response code: REQUEST_DENIED

Driveable Vertical Mast Lift 20MVL

JLG Driveable Vertical Mast Lift 20MVL
Key Specs

  • Machine Width: 2 ft 6 in. / 0.76 m
  • Platform Height: 19 ft 6 in. / 5.94 m

Key Features

  • Five platform options with exclusive “Quick Change" mountings for one-minute change-outs
  • Exclusive Point & Go® single joystick control operates drive and steer, and lift and lower
  • Rigid mast for operator comfort and stability
Dimensional Data
Wheel Size - Front Caster 8 x 2.5"
Ground Clearance 2 in. / 0.05 m
Ground Entry Height 1 ft 6 in. / 0.46 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 4 ft 6 in. / 1.36 m
Machine Width 2 ft 6 in. / 0.75 m
Platform Dimension A 2 ft 2 in. / 0.66 m
Platform Dimension B 2 ft 4 in. / 0.71 m
Platform Height 19 ft 6 in. / 5.94 m
Wheel SIze - Rear 12.62 x 4"
Reach Specifications
Platform Height 19 ft 6 in. / 5.94 m
Working Height 25 ft 1 in. / 7.65 m
Performance
Drive Speed - Platform Elevated 0.60 mph / 0.97 km/h
Drive Speed - Platform Lowered 4 mph / 5.63 km/h
Drive System 4 Brush Direct Electric
Gradeability 20 %
Maximum Drive Height 19 ft 6 in. / 5.94 m
Maximum Lift Height 20 ft / 5.94 m
Platform Capacity 350 lb / 158.76 kg
General
Machine Weight 2325 lb / 1054.60 kg
Power Source
Batteries Two Sealed-100 AH 12 Volt

Komatsu Excavators PC1250LC-8 MH
PC1250LC-8 MH Material Handler (55'-70' Reach)

If you have a material handling application that needs high lift and plenty of lifting power, the PC1250LC-8 MH requires a closer look. An elevated cab, with tiltable structure for service access, and up to a 70 - two piece front give the PC1250LC-8 MH tremendous operating range.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed / Net 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Electronic Open-center Load Sensing System (EOLSS)
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 494 ltr/min 2 x 130.5 U.S. gpm
For swing 1 x 600 ltr/min 1 x 158.5 U.S. gpm
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders Bore x Stroke bore x stroke
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 10.0" x 110.0" 254 mm x 2794 mm
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 70000 kg / 686 kN
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 55 each side
No. of carrier rollers 3 each side
No. of track rollers 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr
Operating Weight (approximate)
Operating weight w/o Grapple:
55' / 16.8 m 244,418 lb 110868 kg
70' / 21.3 m 279,157 lb 126626 kg

Komatsu Excavators PC360LC-10

PC360LC-10 Hydraulic Excavator

The PC360LC-10 Hydraulic Excavator with Komatsu's Tier 4 interim engine technology can save up to 10% on your fuel bill compared to the previous model and, more importantly, you won't need to stop the machine to do normal regeneration. Couple that with six working modes, Power Max, more powerful lift mode and you have an excavator that will meet any challenge you can through at it.

Engine
Model Komatsu SAA6D114E-5*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.49" 114 mm
Stroke 5.69" 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Horsepower
SAE J1995 : Gross 271 HP 202 kW
ISO 9249/SAE J1349 : Net 257 HP 192 kW
Rated rpm 1950 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU Stage 3B emissions certified.
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 141 U.S. gal/min 535 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,050 psi 285 kgf/cm²/ 27.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.5" x 58.3" x 3.9" 140 mm x 1480 mm x 100 mm
Arm / 1 6.3" x 71.9" x 4.3" 160 mm x 1825 mm x 110 mm
Bucket / 1 - for 3.2 m 10'5" and 4.0 m 13'2" Arms 5.5" x 50.6" x 3.9" 140 mm x 1285 mm x 100 mm
Bucket / 1 - for 2.54 m 8'4" Arm 5.9" x 50.6" x 4.3" 150 mm x 1285 mm x 110 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 66,191 lb 290 kN / 29570 kgf
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.8 mph 4.5 km/h
Low 2.0 mph 3.2 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method: Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 82,313 ft. lbs. 11386 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 159.8 U.S. gal 605 ltr
Coolant 9.7 U.S. gal 37 ltr
Engine 9.2 U.S. gal 35.0 ltr
Final drive, each side 2.4 U.S. gal 9.0 ltr
Swing drive 3.6 U.S. gal 13.7 ltr
Hydraulic tank 49.7 U.S. gal 188 ltr
Hydraulic system 96.4 U.S. gal 365 ltr
Operating Weight (approximate)
Operating weight includes 6500 mm / 21'3" one-piece HD boom, 3185 mm / 10'5" arm, SAE heaped 1.96 m³ / 2.56 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 28" 700 mm
Operating Weight 78,255 lb 35496 kg
Ground Pressure 8.31 psi 0.59 kg/cm²
Shoes 31.5'' 800 mm
Operating Weight: 79,093 lb 35876 kg
Ground Pressure 7.40 psi 0.52 kg/cm²
Shoes 33.5" 850 mm
Operating Weight: 79,930 lb 36255 kg
Ground Pressure 7.00 psi 0.50 kg/cm²
Component Weights
Arm including bucket cylinder and linkage:
3185 mm / 10'5" arm assembly 3,882 lb 1761 kg
4020 mm / 13'2" arm assembly 4,383 lb 1988 kg
One piece HD boom including arm cylinder:
6500 mm / 21'3" boom assembly 6,912 lb 3135 kg
Boom cylinders x 2 571 lb 259 kg
Counterweight 15,631 lb 7090 kg
1.96 m³ / 2.56 yd³ bucket - 54" width 3,425 lb 1554 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics