Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Isle Of Palms, South-Carolina

Our platform is your one stop solution for all your construction equipment rental needs in Isle Of Palms.From basic, do-it-yourself home projects to large construction sites, this platform is your multi-tier rental solution for all kinds of heavy machinery, tools and equipment.

Whether you need just one trailer for a small job or require an entire fleet of excavators, backhoes, lifts, etc., our vendors would be able to meet all your varied requirements. The fact that our rental network, with strong presence in Salley, happens to be the most preferred one is mostly due to the fact that we’ve partnered with some of the most reliable vendors. You can safely expect all machines or heavy construction equipment to be clean and well-maintained, for instance, when you find a vendor through us.

Dial our toll free number or submit an online query (through contact form on the right) and see for yourself!

Equipment Rental Isle Of Palms, Construction equipment rental Isle Of Palms, Construction Isle Of Palms, Heavy Equipment Rental Isle Of Palms.

JCB Hydraulic Excavators JS260


The JCB JS260 is the 26 ton model in our heavy tracked excavators range. It's engineered with exceptional strength, productivity, efficiency, comfort, safety and ease of maintenance.

A closed box section revolving frame increases strength and reduces stress. It also makes these excavators highly resistant to impact damage. We've used strong parts too - premium industry standards in fact.

Meanwhile, this 26 ton excavator's engine is a highly efficient Isuzu 188hp (147kW) 4HK unit, compliant with Tier 4i. The benefits of the JS260 series of tracked excavators don't end there either.

Dig Depth
Maximum Digging Depth 23' 8" (7.23m)
Operating Weight 61,160lb (27750kg)
Maximum Engine Power 188hp (147kW)

Komatsu Trucks HD1500-7
HD1500-7 Off-Highway Truck

The HD1500 has a capacity of 159 tons or 102 yd3. The fully automatic seven speed transmission with lock-up and skip-shift give the operator the speed and response he needs to meet production demands. On down hills, the operator has oil cooled multi-disc retarder and brakes to control his fully loaded truck. A tight turning radius and hydropneumatic suspension make the HD1500-7 very maneuverable in tight quarters and provide a cushioned ride for better load retention and a more comfortable ride.

Model Komatsu SDA12V160
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled
Number of cylinders 12
Bore x stroke 6.26" x 7.48" 159 mm x 190 mm
Piston displacement 2,746 in³ 45 ltr
SAE J1995 / Gross 1,487 HP 1109 kW
ISO9249/SAE J1349 / Net 1,406 HP 1048 kW
Rated rpm 1,900 rpm
Fan drive type Mechanical
Maximum torque 5,041 lb ft 697 kg/m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system :
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and pre-cleaned, with dust indicator
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary-shaft type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive 1st and 2nd gear with direct drive lock-up in 1st through 7th
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 36 mph 58 km/h
Rear Axle Full-floating
Final drive type Planetary gear
Differential 2.647
Planetary 7.235
Suspension System
Variable rate, hydropneumatic with integral rebound control.
Maximum front stroke 14.76'' 375 mm
Maximum rear stroke 4.17" 106 mm
Rear axle oscillation +/-9.2°
Steering system
Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Accumulator assist
Minimum turning radius 40' 12.2 m
Steering angle (left or right) 41°
Integral 4-post ROPS/FOPS cab structure (meets SAEJ 1040 Apr 88)
Main Frame
Type Box-sectioned structure; Integral front bumper
Brakes meet ISO 3450 standard.
Service brakes:
Front Fully hydraulic control, oil-cooled multiple-disc type
Rear Fully hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, oil-released, 3 caliper dry disc mounted on input yoke to differential
Retarder Oil-cooled, multiple-disc front and rear brakes act as retarder
Secondary brake Manual - push button operated.
Automatically applied prior to hydraulic system pressure dropping below established level.
Brake surface: 24,668 in² 159148 cm³
Struck 71 yd³ 54 m³
Heaped (2:1 ,SAE) 102 yd³ 78 m³
Nominal payload 158.9 U.S. tons 144.1 metric tons
Material 400 Brinell hardness high tensile strength steel (front, sides, and bottom)
Structure Flat floor configuration
Material thickness:
Bottom 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area: (inside length x width) 25'2"x 18'9" 7670 mm x 5705 mm
Dumping angle 45°
Height at full dump 37'6" 11440 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Two, 3-stage telescopic type
Relief pressure 2,750 psi 19.0 MPa 193.4 kg/cm²
Hoist time
Raise 15 sec
Lower 15 sec
Weight (approximate)
Empty weight 232,144 lb 105300 kg
Max. gross vehicle weight: 550,000 lb 249478 kg
Not to exceed max. gross vehicle weight, including options, fuel and payload.
Empty weight is with 100% fuel and operator.
Weight distribution:
Front axle 48.6%
Rear axle 51.4%
Front axle 32.8%
Rear axles 67.2%
Standard Tires 33.00 R51
Service Refill Capacities
Fuel tank 560 U.S. gal 2120 ltr
Engine oil 51 U.S. Gal 193 ltr
Hydraulic system 238 U.S. gal 900 ltr
Differentials 78 U.S. gal 297 ltr
Final drives (total) 63.5 U.S. gal 240 ltr
Transmission 40.5 U.S. gal 153 ltr

JCB Hydraulic Excavators 8008 CTS

8008 CTS

The 1929 lb (875kg) 8008 CTS micro excavator is a compact machine, capable of high performance in the most restricted areas, including within buildings and in rear gardens. In fact it's the most powerful machine of its size on the market. As such, the 8008 CTS micro excavator can dramatically reduce the time and manpower (just one man plus the machine) it takes to carry out labour-intensive digging jobs.

The JCB 8008 CTS hydraulic excavator is small enough to be trailered between sites and has a whole host of attachments for even more versatility.

No wonder our micro excavators are popular with everyone from rental companies to landscapers, redevelopers, grounds care operators and DIY enthusiasts.

Operating Weight 2094lb (950kg)
Working Perfromance
Maximum Dig Depth 5' 6" (1.69m)
Maximum Dump Height 6' 6" (1.98m)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics