John Deere Scraper Systems 1810E

1810E
The 1810E Ejector Scraper is a four-tire scraper that carries 18 cu yd of material and has a 10-ft cutting width. This scraper works well for bulk-hauling construction contractors needing a narrow transport scraper. The 1810E requires at least 360 hp to pull in single, tandem, or triple scraper formation.

CAPACITY
Struck capacity cubic yards	12.5 cu yd
Heaped capacity cubic yards	18.3 cu yd

DIMENSIONS
Overall dimensions	--
Length, ft, in. (mm)	29 ft 8 in. 9042 mm
Width, ft, in. (mm)	11 ft 3632 mm
Height, ft, in. (mm)	6 ft 7 in. 2007 mm
Bucket dimensions	--
Length, ft, in. (mm)	9 ft 2 in. 2794 mm
Width, ft, in. (mm)	10 ft 6 in. 3200 mm
Height, ft, in. (mm)	4 ft 1321 mm

WEIGHT
Approximate shipping weight, lb (kg)	22,500 lb 10,205 kg

SCRAPER WEIGHT DISTRIBUTION
Tongue	26%
Wheels	74%

TIRES
Number of tires per scraper	4
Tire sizes	--
Standard	20.5 X 25
Option 1	NA
Option 2	NA

HORSEPOWER RECOMMENDATIONS
Minimum	360 hp
Maximum	575+ hp

BLADES AND ROUTER
2 rows of blade bolts	Standard
6-in. bolt-hole spacing	Standard
Straight blade configuration	Standard
Drop center configuration	Optional
Teeth configuration	Optional
Adjustable router bits	Standard

HYDRAULICS
Size of lines and hoses	3/4 in.
Tandem lines	Standard
Minimum flow required, gpm	25 gpm
Minimum pressure required, psi	2500 psi

PRECISION LEVELING
GPS/Laser adaptable	Yes

LOADING TYPE
Direct loading	Yes
Top loading	Yes
Push loading	Yes
Autoload	Yes

HITCHES AND DRAWBARS
Hitch type	Yoke
Special tractor drawbar required	Yes

WARRANTY
Six months	Standard
Extended warranty (2-3 years)	Optional

ADDITIONAL EQUIPMENT
Yoke-type drawbars	Optional
Quick-attach drawbars	Optional
Drawbar hitch adapters	Optional
Scraper-to-scraper quick-attach	Optional
Bolt-on rear bumper	Optional
Laser receiver bracket	Optional
High-speed leveling skid pads	Yes